Contribute
Register

Help me with native powermanagement and speedsteps!

Status
Not open for further replies.
Joined
Jun 18, 2011
Messages
377
Motherboard
Rog Strix z490 E gaming
CPU
i9 10900k
Graphics
5700xt
Mac
  1. MacBook Pro
Mobile Phone
  1. Android
  2. iOS
Hello everybody.

Im running my new hackintosh since some months ago. Z97X-UD5H, i7 4790k, 32gb ram 2133mhz (OCed), GTX 970 g1, and is awesome. But I have a little problem. I've been working with clover and smbios MacPro3.1. This is good, but the speedsteps didn't work. So, I've followed this guide (http://www.tonymacx86.com/mavericks...vericks-native-cpu-igpu-power-management.html). I've changed my clover config.plist to load a default smbios (iMac 14.2 in this case) and to drop the required tables. I've tried to install AppleIntelCPUPowerManagementInfo.kext too but I get kp, so I removed it.

I've created a new SSDT.aml with the ssdtPRGen script with the following args:
./ssdtPRGen.sh -c 2 -w 2 -turbo 4600

My i7 is OCes to 4600mhz, because of that I've used "-turbo 4600". All is working perfectly, except the speedsteps I think. I just get x8, x40-x46

Here you have my config.plist and patchmatic extract too. Maybe someone can guide me.
 

Attachments

  • alexmenn desktop.zip
    34.6 KB · Views: 25
Hello everybody.

Im running my new hackintosh since some months ago. Z97X-UD5H, i7 4790k, 32gb ram 2133mhz (OCed), GTX 970 g1, and is awesome. But I have a little problem. I've been working with clover and smbios MacPro3.1. This is good, but the speedsteps didn't work. So, I've followed this guide (http://www.tonymacx86.com/mavericks...vericks-native-cpu-igpu-power-management.html). I've changed my clover config.plist to load a default smbios (iMac 14.2 in this case) and to drop the required tables. I've tried to install AppleIntelCPUPowerManagementInfo.kext too but I get kp, so I removed it.

I've created a new SSDT.aml with the ssdtPRGen script with the following args:
./ssdtPRGen.sh -c 2 -w 2 -turbo 4600

My i7 is OCes to 4600mhz, because of that I've used "-turbo 4600". All is working perfectly, except the speedsteps I think. I just get x8, x40-x46

Here you have my config.plist and patchmatic extract too. Maybe someone can guide me.

You need to follow the "Problem Reporting" steps of the guide http://www.tonymacx86.com/mavericks...vericks-native-cpu-igpu-power-management.html and post to that thread.
Note, you need to have stock clock PM working before attempting OC PM.

BIOS

  1. Load Optimized Defaults
  2. Stock Clock
    1. Verify
    2. OC, use ./ssdtPRGen.sh -f freq flag (after stock clock PM working)
 
Status
Not open for further replies.
Back
Top