- Joined
- Feb 4, 2012
- Messages
- 6
- Motherboard
- Gigabite Z77-DS3H
- CPU
- i7-3770
- Graphics
- GT 640
- Mac
Hi all
please, i need help with this machine, trying to install 10.7 without Success
The System is:
Z77-DS3H Rev 1.1 Bios F8
i7-3770
Ram 8GByte Corsair DDR3
SSD Sandisk 120 - connected on blue 3gb port
NVidia Gt 640 Geforce
as far as i know, this is an ivy bridge CPU and I created the Lion Setup following this guide
http://tonymacx86.blogspot.it/2011/10/unibeast-install-mac-os-x-lion-using.html
but I cannot see my ssd (and onother sata disk 160 Gbyte Maxtor Diamond Max21, connected only une time for testing)
and so I found this thread about IOATAFamily.kext.zip
http://www.tonymacx86.com/mountain-...ut-i-see-no-disk-disk-utility.html#post412238
But still no HD ready for the installation
I have also tryed to do the same installation with an external Usb Disk and I was able to install Lion
But, following this thread because of the CPU
http://legacy.tonymacx86.com/viewtopic.php?f=81&t=59052&start=0&sid=b3c19641d8fdc139dd78aacc1b3fab6f
I was unable to boot.
Anyway, the question is, as long as the hardware is fully compatible for an hack, where am I wrong
Can please someone help ?
the strange thing is that if I try to install a 10.6 I can see disks and install SL
thanks a lot guys
please, i need help with this machine, trying to install 10.7 without Success
The System is:
Z77-DS3H Rev 1.1 Bios F8
i7-3770
Ram 8GByte Corsair DDR3
SSD Sandisk 120 - connected on blue 3gb port
NVidia Gt 640 Geforce
as far as i know, this is an ivy bridge CPU and I created the Lion Setup following this guide
http://tonymacx86.blogspot.it/2011/10/unibeast-install-mac-os-x-lion-using.html
but I cannot see my ssd (and onother sata disk 160 Gbyte Maxtor Diamond Max21, connected only une time for testing)
and so I found this thread about IOATAFamily.kext.zip
http://www.tonymacx86.com/mountain-...ut-i-see-no-disk-disk-utility.html#post412238
But still no HD ready for the installation
I have also tryed to do the same installation with an external Usb Disk and I was able to install Lion
But, following this thread because of the CPU
http://legacy.tonymacx86.com/viewtopic.php?f=81&t=59052&start=0&sid=b3c19641d8fdc139dd78aacc1b3fab6f
I was unable to boot.
Anyway, the question is, as long as the hardware is fully compatible for an hack, where am I wrong
Can please someone help ?
the strange thing is that if I try to install a 10.6 I can see disks and install SL
thanks a lot guys