HELP instal osx on Intel Pentium G3220

[Adrian B]

hi ,


There are news to install osx in my pc???

The Intel G3220 processor can work in Mountain Lion with a supported graphics card. There is no support in Mavericks and Yosemite. The best option would be to use an i3 processor model that is listed in the buyers guide:
http://www.tonymacx86.com/building-customac-buyers-guide-november-2014.html

i3-4330
i3-4340
i3-4350
i3-4360

The HD4600 graphics will work with your motherboard. Please note that there are some other i3 models that have unsupported desktop HD4400 graphics.

 

[deus-ex-machina]

but if i buy a new graphic card?
And disable the graphic of the cpu?

 

[Adrian B]

but if i buy a new graphic card?
And disable the graphic of the cpu?

The installation process does not work as the Pentium G3220 is rejected by Mavericks and Yosemite as unsuitable. It is not just a graphics problem.

There has been comments made that this processor can be used with Clover. This has not been established to work by the wider community to my knowledge. I am not able to help further with this avenue of enquiry. If Clover works with your processor then I suggest that you do a proper guide if successful.

http://www.tonymacx86.com/mavericks...m-mavericks-cant-boot-install.html#post914319

 

[deus-ex-machina]

[QUOTE = Adrian B; 931.927] Il processo di installazione non funziona come il Pentium G3220 è respinta da Mavericks e Yosemite come inadatto. Non è solo un problema grafici. C'è stata commenti fatto che questo processore può essere utilizzato con trifoglio. Questo non è stato stabilito al lavoro in una comunità più ampia, a mia conoscenza. Io non sono in grado di aiutare ulteriormente con questo viale di inchiesta. Se Clover funziona con il processore, allora vi suggerisco di fare una vera e propria guida, se

This cpu?


[h=1]Intel Core i7-4790 3.6Ghz 8MB 1150 Haswell Refresh con GPU HD4600 84W BOX[/h]
is ok for 10.10 ???

 

[kervich]

The installation process does not work as the Pentium G3220 is rejected by Mavericks and Yosemite as unsuitable. It is not just a graphics problem.

There has been comments made that this processor can be used with Clover. This has not been established to work by the wider community to my knowledge. I am not able to help further with this avenue of enquiry. If Clover works with your processor then I suggest that you do a proper guide if successful.

http://www.tonymacx86.com/mavericks...m-mavericks-cant-boot-install.html#post914319

For G-series pentiums (which are in fact i3's with HT disabled and cache halved) you will need to disable CPUID Max Limit in bios and disable VTx.
If you're using clover - set KernelCPU=true. If you don't - spend a couple hours to read tutorials/docs on how to install OS X with Clover.

 

[Adrian B]

This cpu?


Intel Core i7-4790 3.6Ghz 8MB 1150 Haswell Refresh con GPU HD4600 84W BOX


is ok for 10.10 ???

The i7-4790 CPU will work with OS X 10.10 and your GA-B85-HD3. Make sure that your UEFI/BIOS is updated to the latest version for support. Gigabyte show 3 different revisions of the B85 HD3 - select the correct version!
http://www.gigabyte.com/products/product-page.aspx?pid=4568#bios

Rev 1.0 board support:
http://www.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=4568

Rev 2.0 board support:
http://www.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=5007

Rev 3.0 board support:
http://www.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=5190

The following link has a list of known compatible CPUs to use with socket 1150 boards. Refresh Haswell CPUs will need to have up to date BIOS.
http://www.tonymacx86.com/building-customac-buyers-guide-november-2014.html#CPUs

 

[deus-ex-machina]

The i7-4790 CPU will work with OS X 10.10 and your GA-B85-HD3. Make sure that your UEFI/BIOS is updated to the latest version for support. Gigabyte show 3 different revisions of the B85 HD3 - select the correct version!
http://www.gigabyte.com/products/product-page.aspx?pid=4568#bios

Rev 1.0 board support:
http://www.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=4568

Rev 2.0 board support:
http://www.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=5007

Rev 3.0 board support:
http://www.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=5190

The following link has a list of known compatible CPUs to use with socket 1150 boards. Refresh Haswell CPUs will need to have up to date BIOS.
http://www.tonymacx86.com/building-customac-buyers-guide-november-2014.html#CPUs

My motherboard is rev1.

I see the link http://www.tonymacx86.com/building-customac-buyers-guide-november-2014.html#CPUs but i don't see Intel Core i7-4790 3.6Ghz 8MB 1150 Haswell Refresh con GPU HD4600 84W BOX but i not see "Haswell Refresh"

 

[Adrian B]

i7-4790 is the third CPU down from the top of the list.

 

[steve-tmq]

This is my configuration:


CPU: Intel Pentium G3220;
Motherboard: GIGABYTE B85M-D3H
Graphics Card: Intel ® HD Graphics (integrated in the CPU I think)
RAM: 12 GB (8 GB + 1 bench 1 bench 4);
HD: win 8.1 (2x250 sata2) I have two HD 250 with two differendi installations of win 8.1 64;
HD: 500 GB (Here I would like to put osx);
HD data (1 TB);

I have to install osx on my pc.
I need to install or Mavericks or Mountain Lion


help help

I have the same combo and the problem I have is; Booting with the -v option I see screens listing/reading the kexts and then a reboot. I know it's NOT the same as the Haswell early boot as I have a Lenovo laptop i3 with Maverics on it and had to patch the kernel to get it to work so I know about that. I also know about using boot options cpus=1 dart=0 VT-d (thats the combination I need on my laptop) Also it is hard to see what makes the computer reboot as it's so quick with no info displayed. One post I did see is that it's down to the G3220 replace it with a i3 but I can confirm this as I don't have one.