Contribute
Register

[HELP] How can I enable HDMI audio with NVIDIA GTX 750Ti?

Did you enabled HDMI audio on your Hackintosh device?

  • Yes, of course.

    Votes: 6 60.0%
  • NO.

    Votes: 4 40.0%

  • Total voters
    10
Status
Not open for further replies.
Script: /Volumes/EFI/EFI/CLOVER/ACPI/patched/SSDT-HDMI-NVIDIA-PEG0.aml installed
Attachment: /Volumes/EFI/EFI/CLOVER/ACPI/patched/SSDT-HDMI-HD3000-AirPlay.aml
What happened?

Remove /Volumes/EFI/EFI/CLOVER/ACPI/patched/SSDT-HDMI-HD3000-AirPlay.aml
Run cloverHDMI
Restart, reply with Terminal output and new files.
Code:
huanghaoyuans-iMac:~ huanghaoyuan$ /Users/huanghaoyuan/Downloads/audio_cloverHDMI-130_v0.8.command 


Agreement

The audio_cloverHDMI script is for personal use only. Do not distribute

the patch, any or all of the files for any reason without permission.

The audio_cloverHDMI script is provided as is and without any warranty.


File: audio_cloverHDMI-130_v0.8.command

Release Mode

EFI partition is mounted

No HDMI audio codec(s) detected, continue (y/n): y

HDMI audio codec(s)

Integrated Graphics is not installed/enabled

Install AMD/Nvidia HDMI audio (y/n): y

Nvidia discrete graphics card 10de1380 found on PEG0@1/GFX0@0

Nvidia HDMI audio is enabled

Script exits when another HDMI audio method is installed

Remove existing HDMI audio method, restart, run cloverHDMI

To save a Copy of this Terminal session: Terminal/Shell/Export Text As ...
here is the new output, I am going to restart and try again.
 
Code:
Last login: Thu Aug 30 22:30:31 on console
huanghaoyuans-iMac:~ huanghaoyuan$ /Users/huanghaoyuan/Downloads/audio_cloverHDMI-130_v0.8.command
Agreement
The audio_cloverHDMI script is for personal use only. Do not distribute
the patch, any or all of the files for any reason without permission.
The audio_cloverHDMI script is provided as is and without any warranty.
File: audio_cloverHDMI-130_v0.8.command
Release Mode
EFI partition not mounted
Macintosh HD/EFI not found
EFI/CLOVER folder not available to install HDMI audio
No system files were changed
To save a Copy of this Terminal session: Terminal/Shell/Export Text As ...
huanghaoyuans-iMac:~ huanghaoyuan$ sudo -s
Password:
bash-3.2# mkdir /Volumes/EFI
bash-3.2# mount -t msdos /dev/disk0s1/ /Volumes/EFI
bash-3.2# /Users/huanghaoyuan/Downloads/audio_cloverHDMI-130_v0.8.command
Agreement
The audio_cloverHDMI script is for personal use only. Do not distribute
the patch, any or all of the files for any reason without permission.
The audio_cloverHDMI script is provided as is and without any warranty.
File: audio_cloverHDMI-130_v0.8.command
Release Mode
EFI partition is mounted
No HDMI audio codec(s) detected, continue (y/n): y
HDMI audio codec(s)
Integrated Graphics is not installed/enabled
Install AMD/Nvidia HDMI audio (y/n): y
Nvidia discrete graphics card 10de1380 found on PEG0@1/GFX0@0
Nvidia HDMI audio is enabled
Script exits when another HDMI audio method is installed
Remove existing HDMI audio method, restart, run cloverHDMI
To save a Copy of this Terminal session: Terminal/Shell/Export Text As ...
This is the new output after restart.
 

Attachments

  • debug_10595.zip
    1.4 MB · Views: 68
If the Clover HDMI method is not working fo you (it didn't for me) try installing AppleALC instead which supports Nvdia HDMI Audio ... you can use it alongside an existing AppleHDA enabler if your analogue/codec audio is already working.

AppleALC is also a HDMI audio enabling method described in Toleda's HDMI guide post #2 ..... see the workarounds section, step 3, check to see if your Nvidia cards GPU is already supported (I suspect it is) if it is then there is no need to use Xcode. just remove the previous method patches and install Lilu & AppleALC and see if it works, it worked for me with Nvidia 980 Ti.

Cheers
Jay
 
Last edited:
If the Clover HDMI method is not working fo you (it didn't for me) try installing AppleALC instead which supports Nvdia HDMI Audio ... you can use it alongside an existing AppleHDA enabler if your analogue/codec audio is already working.

AppleALC is also a HDMI audio enabling method described in Toleda's HDMI guide post #2 ..... see the workarounds section, step 3, check to see if your Nvidia cards GPU is already supported (I suspect it is) if it is then there is no need to use Xcode. just remove the previous method patches and install Lilu & AppleALC and see if it works, it worked for me with Nvidia 980 Ti.

Cheers
Jay
Hello, Can you tell me what have you done with fixing HDMI audio?
because I want to know which step I have not done yet or do wrong.
 
The Link to the guide and the step i used is in my post (workarounds - step 3) :-

https://www.tonymacx86.com/threads/applehda-hdmi-audio-guide.234735/#post-1606787

Jay
My device id not supported.
螢幕快照 2018-08-31 下午7.50.25.png
 
  1. AppleALC.kext_v1.2.6/Support
    • de100f0e
  2. AppleALC.kext_v1.2.7/Support (6/2/2018)
    • de10ef10
    • de10b00f
    • de10bb0f
    • de10b80f
    • de10b90f
    • de10ba0f
    • de10f010
    • de10f110


these are supported, so do you have any method to enable hdmi audio?
 
Status
Not open for further replies.
Back
Top