Contribute
Register

Help for MacOS boot

Status
Not open for further replies.
Joined
Nov 1, 2020
Messages
2
Motherboard
MSI Mag Z390M Mortar
CPU
Intel Core i7-9700
Graphics
AMD Radeon RX 5600 XT
Hi guys, I hope someone could help me.

Starting with my configuration:
MB: MSI Mag Z390M Mortar
CPU: Intel Core i7-9700
GPU: AMD Radeon RX 5600 XT
Ram: 1x16Gb Hyper-X Fury Black 3200Mhz DDR4
NvME 1: Samsung 970 EVO
NvME 2: Kingston SA2000M8250G

I tried to install MacOS Catalina but something doesn't work. After starting booting procedure with Clover, the apple bar and logo appear but, when tt's full, it doesn't happen anything. Any solution ?
I also tried in verbose mode...I thought that was a problem of kingston nvme but the installer doesn't boot neither with the nvme removed.
 

Attachments

  • photo_2020-11-01_19-12-38.jpg
    photo_2020-11-01_19-12-38.jpg
    126 KB · Views: 61
Hi guys, I hope someone could help me.

Starting with my configuration:
MB: MSI Mag Z390M Mortar
CPU: Intel Core i7-9700
GPU: AMD Radeon RX 5600 XT
Ram: 1x16Gb Hyper-X Fury Black 3200Mhz DDR4
NvME 1: Samsung 970 EVO
NvME 2: Kingston SA2000M8250G

I tried to install MacOS Catalina but something doesn't work. After starting booting procedure with Clover, the apple bar and logo appear but, when tt's full, it doesn't happen anything. Any solution ?
I also tried in verbose mode...I thought that was a problem of kingston nvme but the installer doesn't boot neither with the nvme removed.
It is certainly not a problem with the Kingston A2000. I use it myself to boot Mojave and Catalina on my system successfully.

Are you trying to boot with the USB stick created by Unibeast? If so it may not work directly on a Z390 system.

Check this thread for some possible modifications :
 
I tried the procedure described in the post but nothing...always the same problem
 
Status
Not open for further replies.
Back
Top