[HELP] Broken kext - High Sierra Hackintosh NOT START

[paolo8997]

Hi, after years of running on my hackintosh, i stupidly modified the kext Whatevergreen and lilu with a tool.
Mac did not start after reboot, I changed the "graphics injector" options with "Load video bios" parameters, the mac started with jerky graphics, with many glitches. With clover configurator I verified that in my efi/clover/kext there was only FakeSMC.kext. I downloaded the default kext and I entered them but in any case the mac does not start anymore.
After exhausting attempts to modify clover boot options I decided to write here.
I attach the verbose mod logs and the installed kext.

Before reinstalling everything from scratch I would like to try to recover the current installation

 

[Feartech]

Hi, after years of running on my hackintosh, i stupidly modified the kext Whatevergreen and lilu with a tool.
Mac did not start after reboot, I changed the "graphics injector" options with "Load video bios" parameters, the mac started with jerky graphics, with many glitches. With clover configurator I verified that in my efi/clover/kext there was only FakeSMC.kext. I downloaded the default kext and I entered them but in any case the mac does not start anymore.
After exhausting attempts to modify clover boot options I decided to write here.
I attach the verbose mod logs and the installed kext.

Before reinstalling everything from scratch I would like to try to recover the current installation

no need for nvidiagraphicsfixup kext

download fresh versions, maybe reset nvram

failing that, zip and upload your EFI

 

[paolo8997]

Thanks for your reply.
How can i modify efi? I don't have access to the system

 

[Feartech]

Thanks for your reply.
How can i modify efi? I don't have access to the system

try with your usb installer to boot from and see if you can access macOS that way

 

[paolo8997]

My installation dates back to a few years ago. I don't have the usb installer. Can I make one now? Do you have a link for a guide?

 

[Feartech]

My installation dates back to a few years ago. I don't have the usb installer. Can I make one now? Do you have a link for a guide?

you may be able to remove the drive and plug it into a windows computer and access the EFI that way

or plug it into another mac

or use another computer to create a new usb installer

 

[paolo8997]

I created a clover usb boot but the system does not boot. in verbose mode I see errors similar to the previous screens. Can you check my EFI folder? I added nvidiagraphicsfixup kext, removed IntelGraphicsFixup.kext and added FixShutdown in config.plist

Thanks

 

[Feartech]

I created a clover usb boot but the system does not boot. in verbose mode I see errors similar to the previous screens. Can you check my EFI folder? I added nvidiagraphicsfixup kext, removed IntelGraphicsFixup.kext and added FixShutdown in config.plist

Thanks

i mentioned that you should remove nvidiagraphicsfixup kext

iMac18,1 is not suitable for a Skylake system, you should use iMac17,1

 

[paolo8997]

Oh sorry, I had read wrong.
I removed the disk from the pc, this is the hackintosh's EFI partition.

Yesterday i enter manualy this kext, when I was still able to access the pc. After using the tool the EFI folder contained only FakeSMC.kext.

 

[Feartech]

Oh sorry, I had read wrong.
I removed the disk from the pc, this is the hackintosh's EFI partition.

Yesterday i enter manualy this kext, when I was still able to access the pc. After using the tool the EFI folder contained only FakeSMC.kext.

remove
IntelGraphicsFixup.kext
Lilu.kext.dSYM
WhateverGreen.kext.dSYM
XHCI-x99-injector.kext
XHCI-300-series-injector.kext
XHCI-200-series-injector.kext

iMac17,1 would still be a better choice

also you mentioned you stupidly modified the kexts... in what way?

make sure to replace kexts with new ones