Help a Beginner with his z77-ds3h

[schwubdiwub]

I installed from UniBeast with no problems. I started again and now I don't know how I should use MultiBeast.
I have no sound and graphics (ati 4890). Everything else works OOB, it seems.
Do I have to install EasyBeast, UserDSTD or only Chimera? Also, there are so many options in the Audio Section.
Another point is the TrimEnabler in the Disk Section. Is it necessary if I use a SSD?
Really don't want to bother you with another beginner thread, but the day was long and i don't have the energy to read the forums up and down...

Thank you.

 

[schwubdiwub]

No advice?

I tried on my own and installed the standalone chimera and it doesn't boot my ML installation (Unibeast bootloader works perfect), i installed the Non-DSDT HDAEnabler and the Patched AppleHDA, both ALC898 -> no sound yet.
I installed the netkas.org package for 48xx and the Device Injector -> still doesn't work. I only have poor 1024x768 resolution.

 

[schwubdiwub]

Update:

Sound works fine now. It needs the ALC887. Graphics is still not recognized.
Chimera also doesn't work for me. I tried one more time with the log enabled and at the end it gives me the output "ACPI_SMC_PlatformPlugin::registerLPCDriver -failed to locate SMD Driver"