Contribute
Register

HD4600 HDMI Audio / Sierra - Which steps are required after Update?

Status
Not open for further replies.
Joined
Feb 3, 2014
Messages
100
Motherboard
Gigabyte Z390 Designare
CPU
i9-9900K
Graphics
GTX 780 Ti
Here are my specs:

Motherboard: Gigabyte GA-Z87N-WIFI
CPU: Intel i7 4770k
GPU: Internal HD4600
RAM: Hyper X Fury DDR3 2x4GB 1600MHz
SSD: Crucial MX100 512GB

I've recently updated to Sierra. Then I installed the ALC892 and the HDMI HD4600 options via Multibeast (Sierra Version).

After an update, only the Azul patch is required, as far as I know. My HDMI Audio port was working before the Sierra update, so I just ran the graphics_intel_hd5k-azul-d-90_patch.command file and rebooted the system, but there was still no HDMI audio output in the system settings menu.

Is there anything else that I need to do after an update? Or does the Azul patch require more than just the graphics_intel_hd5k-azul-d-90_patch.command patch?
 
I tried another patch: audio_hdmi_hd4600-hda-110.command

Afterwards, I re-applied the Azul patch but it didn't help.

I've attached the additional files that are needed for proper troubleshooting.

aojOoy7.png


Code:
0:100  0:100  MemLog inited, TSC freq: 3491904882

0:100  0:000  

0:100  0:000  Now is 17.2.2017,  14:42:10 (GMT)

0:100  0:000  Starting Clover revision: 3766 on American Megatrends EFI

0:100  0:000  Build with: [Args: -x64 -D DISABLE_LTO -t XCODE5 | -D DISABLE_LTO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 9 | OS: 10.11.6 | XCODE: 7.3.1]

0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,84988DA3-40A1-4734-847F-C9E849FBAD88,0x28,0x64000) @ACA1A998

0:100  0:000  SelfDirPath = \EFI\BOOT

0:100  0:000  === [ Get Smbios ] ========================================

0:100  0:000  Total Memory Slots Count = 4

0:100  0:000  Type 17 Index = 0

0:100  0:000  Ignoring insane frequency value 0MHz

0:100  0:000  SmbiosTable.Type17->Speed = 0MHz

0:100  0:000  SmbiosTable.Type17->Size = 0MB

0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0

0:100  0:000  SmbiosTable.Type17->Vendor = <null string>

0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>

0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>

0:100  0:000  Type 17 Index = 1

0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz

0:100  0:000  SmbiosTable.Type17->Size = 4096MB

0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1

0:100  0:000  SmbiosTable.Type17->Vendor = Kingston

0:100  0:000  SmbiosTable.Type17->SerialNumber = 10472191

0:100  0:000  SmbiosTable.Type17->PartNumber = KHX1600C10D3/8G   

0:100  0:000  Type 17 Index = 2

0:100  0:000  Ignoring insane frequency value 0MHz

0:100  0:000  SmbiosTable.Type17->Speed = 0MHz

0:100  0:000  SmbiosTable.Type17->Size = 0MB

0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0

0:100  0:000  SmbiosTable.Type17->Vendor = <null string>

0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>

0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>

0:100  0:000  Type 17 Index = 3

0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz

0:100  0:000  SmbiosTable.Type17->Size = 4096MB

0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1

0:100  0:000  SmbiosTable.Type17->Vendor = Kingston

0:100  0:000  SmbiosTable.Type17->SerialNumber = 10472091

0:100  0:000  SmbiosTable.Type17->PartNumber = KHX1600C10D3/8G   

0:100  0:000  Boot status=0

0:100  0:000  Running on: 'Z87M-D3H' with board 'Z87M-D3H'

0:100  0:000  === [ GetCPUProperties ] ==================================

0:100  0:000  CPU Vendor = 756E6547 Model=306C3

0:100  0:000  got cores from CPUID_1 = 0

0:100  0:000  The CPU supported turbo

0:100  0:000  BrandString = Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz

0:100  0:000  MSR 0xE2 before patch 18000402

0:100  0:000  MSR 0xE4              00001814

0:100  0:000  MSR 0xCE              00080838_F3012300

0:100  0:000  non-usable FLEX_RATIO = F0000

0:100  0:000  corrected FLEX_RATIO = E0000

0:100  0:000  FSBFrequency=105MHz DMIvalue=100000kHz

0:100  0:000  Corrected FSBFrequency=100MHz

0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x3C/0x3

0:100  0:000  Family/ExtFamily: 0x6/0x0

0:100  0:000  MaxDiv/MinDiv: 35.0/8

0:100  0:000  Turbo: 37/38/39/39

0:100  0:000  Features: 0xBFEBFBFF

0:100  0:000  Threads: 8

0:100  0:000  Cores: 4

0:100  0:000  FSB: 100 MHz

0:100  0:000  CPU: 3700 MHz

0:100  0:000  TSC: 3700 MHz

0:100  0:000  PIS: 400 MHz

0:100  0:000  === [ GetDevices ] ========================================

0:100  0:000  PCI (00|00:00.00) : 8086 0C00 class=060000

0:100  0:000  PCI (00|00:02.00) : 8086 0412 class=030000

0:100  0:000   - GFX: Model=Intel HD Graphics 4600 (Intel)

0:100  0:000  PCI (00|00:03.00) : 8086 0C0C class=040300

0:100  0:000  PCI (00|00:14.00) : 8086 8C31 class=0C0330

0:100  0:000  PCI (00|00:16.00) : 8086 8C3A class=078000

0:100  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF

0:100  0:000  PCI (00|00:1A.00) : 8086 8C2D class=0C0320

0:100  0:000  PCI (00|00:1B.00) : 8086 8C20 class=040300

0:100  0:000  PCI (00|00:1C.00) : 8086 8C10 class=060400

0:100  0:000  PCI (00|00:1C.02) : 8086 8C14 class=060400

0:100  0:000  PCI (00|02:00.00) : 10EC 8168 class=020000

0:100  0:000   - LAN: 0 Vendor=Realtek

0:100  0:000  PCI (00|00:1C.03) : 8086 244E class=060401

0:100  0:000  PCI (00|03:00.00) : 8086 244E class=060401

0:100  0:000  PCI (00|00:1D.00) : 8086 8C26 class=0C0320

0:100  0:000  PCI (00|00:1F.00) : 8086 8C44 class=060100

0:100  0:000  PCI (00|00:1F.02) : 8086 8C02 class=010601

0:100  0:000  PCI (00|00:1F.03) : 8086 8C22 class=0C0500

0:100  0:000  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF

0:100  0:000  === [ GetDefaultSettings ] ================================

0:100  0:000  Clover load options size = 4 bytes

0:100  0:000   - found plist string = , parse XML in LoadOptions

0:100  0:000    - [!] xml in load options is bad

0:102  0:001  , Status=Success

0:102  0:000  EFI\CLOVER\config.plist loaded: Success

0:102  0:000  === [ GetListOfThemes ] ===================================

0:103  0:001  - [00]: EMBEDDED

0:105  0:001  - [00]: RANDOM

0:106  0:001  - [00]: tonymacx86

0:108  0:002  === [ GetEarlyUserSettings ] ==============================

0:108  0:000  timeout set to 3

0:108  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)

0:108  0:000  KextsToPatch: 6 requested

0:108  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8

0:108  0:000   - [01]: AppleHDA (10.12-AppleHDA/Realtek ALC...) :: BinPatch :: data len: 4

0:108  0:000   - [02]: AppleHDA (10.9-10.12-AppleHDA/Realtek ALC892) :: BinPatch :: data len: 4

0:108  0:000   - [03]: AppleHDA (AppleHDA/Resources/xml>zml) :: BinPatch :: data len: 6

0:108  0:000   - [04]: AppleHDAController (HD4600_HDMI_Audio-1of2) :: BinPatch :: data len: 5

0:108  0:000   - [05]: AppleHDAController (HD4600_HDMI_Audio-2of2) :: BinPatch :: data len: 5

0:108  0:000  Default theme: tonymacx86

0:108  0:000  Hiding entries with string Windows

0:108  0:000  Hiding entries with string \EFI\BOOT\BOOTX64.EFI

0:108  0:000  === [ LoadDrivers ] =======================================

0:109  0:001  Loading FSInject-64.efi  status=Success

0:111  0:001  Loading OsxAptioFix2Drv-64.efi  status=Success

0:112  0:001  Loading OsxFatBinaryDrv-64.efi  status=Success

0:113  0:001  Loading VBoxHfs-64.efi  status=Success

0:114  0:001   - driver needs connecting

0:114  0:000  1 drivers needs connecting ...

0:114  0:000  PlatformDriverOverrideProtocol->GetDriver overriden

0:114  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok

0:188  0:073  Dump SMC keys from NVRAM:

0:192  0:003  === [ InitScreen ] ========================================

0:192  0:000  SetScreenResolution: 1920x1080 - setting Mode 4

0:378  0:186  Video mode change to mode #4: Success

0:378  0:000  Console modes reported: 4, available modes:

0:378  0:000   - [01]: 80x25 (current mode)

0:378  0:000   - [02]: 80x50

0:378  0:000   - [03]: 100x31

0:378  0:000   - [04]: 128x30

0:378  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,84988DA3-40A1-4734-847F-C9E849FBAD88,0x28,0x64000)

0:475  0:097  === [ GetMacAddress ] =====================================

0:475  0:000  MAC address of LAN #0= 74:D4:35:8C:8D:63:

0:475  0:000  === [ ScanSPD ] ===========================================

0:475  0:000  SMBus device : 8086 8C22 class=0C0500 status=Success

0:475  0:000  SMBus CmdReg: 0x1

0:475  0:000  Scanning SMBus [8086:8C22], mmio: 0xF0519004, ioport: 0xF040, hostc: 0x1

0:475  0:000  Slots to scan [8]...

0:476  0:000  SPD[1]: Type 11 @0x51

0:494  0:017  DDR speed 1600MHz

0:494  0:000  Slot: 1 Type 24 4096MB 1600MHz Vendor=Kingston PartNo=KHX1600C10D38G SerialNo=0608020F0D09050B

0:494  0:000  SPD[3]: Type 11 @0x53

0:512  0:017  DDR speed 1600MHz

0:512  0:000  Slot: 3 Type 24 4096MB 1600MHz Vendor=Kingston PartNo=KHX1600C10D38G SerialNo=0609020F0D01050B

0:513  0:000  === [ GetAcpiTablesList ] =================================

0:513  0:000  Get Acpi Tables List from RSDT:

0:513  0:000   - [00]: FACP  A M I len=132

0:513  0:000   - [01]: APIC  A M I len=146

0:513  0:000   - [02]: FPDT  A M I len=68

0:513  0:000   - [03]: SSDT  Cpu0Ist len=1337

0:513  0:000   - [04]: SSDT  CpuPm len=2776

0:513  0:000   - [05]: MCFG   len=60

0:513  0:000   - [06]: HPET  A M I len=56

0:513  0:000   - [07]: SSDT  SataTabl len=877

0:513  0:000   - [08]: SSDT  SaSsdt  len=12953

0:513  0:000   - [09]: BGRT  A M I len=56

0:513  0:000   - [10]: DMAR  HSW  len=144

0:513  0:000  Calibrated TSC frequency =3491904882 =3491MHz

0:513  0:000  === [ GetUserSettings ] ===================================

0:513  0:000  USB FixOwnership: no

0:513  0:000   - final DSDT Fix mask=00000000

0:513  0:000  Using smbios.plist at path: EFI\CLOVER\smbios.plist, Status=Not Found

0:514  0:001  === [ ScanVolumes ] =======================================

0:514  0:000  Found 5 volumes with blockIO

0:514  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)

0:515  0:000          Result of bootcode detection: bootable unknown (legacy)

0:515  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)

0:515  0:000          Found optical drive

0:515  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,84988DA3-40A1-4734-847F-C9E849FBAD88,0x28,0x64000)

0:515  0:000          Result of bootcode detection: bootable unknown (legacy)

0:520  0:004          This is SelfVolume !!

0:520  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,B01624B2-68BE-42CA-9DE9-C3D37C1390B6,0x64028,0x3B847340)

0:521  0:000          Result of bootcode detection: bootable unknown (legacy)

0:521  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,CFC9881E-6051-44D4-ABB0-2A6EB6941F3B,0x3B8AB368,0x135F20)

0:521  0:000  === [ InitTheme ] =========================================

0:522  0:001  Using theme 'tonymacx86' (EFI\CLOVER\themes\tonymacx86)

0:523  0:000  Choosing theme tonymacx86

0:523  0:000  after NVRAM boot-args=dart=0

0:523  0:000  === [ AddCustomLegacy ] ===================================

0:523  0:000  Scanning legacy ...

0:523  0:000   0: 'Whole Disc Boot' (legacy) not legacy

0:523  0:000   1: 'Whole Disc Boot' (legacy) not legacy

0:523  0:000   2: 'EFI' (legacy) not legacy

0:523  0:000   3: 'MAC OS X' (legacy) not legacy

0:523  0:000   4: 'Recovery HD' (legacy) not legacy

0:523  0:000  === [ ScanLoader ] ========================================

0:523  0:000  - [02]: 'EFI'

0:548  0:025  - [03]: 'MAC OS X'

0:557  0:008          AddLoaderEntry for Volume Name=MAC OS X

0:562  0:004          Check if volume Is Hibernated:

0:562  0:000      Check sleep image 'by signature':

0:568  0:006      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found

0:568  0:000      using default sleep image name = \private\var\vm\sleepimage

0:573  0:005      Reading first 512 bytes of sleepimage ...

0:574  0:000   OurBlockIoRead: Lba=1E3E6C30, Offset=3C7CD86000 (BlockSize=512)

0:574  0:000   sig lion: 375FC684

0:574  0:000   sig snow: 7FCC0A5A

0:574  0:000   no valid sleep image offset was found

0:574  0:000      Reading completed -> Success

0:574  0:000       sleepimage offset could not be acquired

0:574  0:000          hibernated: no - sign

0:698  0:123  - [04]: 'Recovery HD'

0:699  0:001          AddLoaderEntry for Volume Name=Recovery HD

0:718  0:018  === [ AddCustomTool ] =====================================

0:719  0:001  found tool \EFI\CLOVER\tools\Shell64U.efi

0:719  0:000  Checking EFI partition Volume 2 for Clover

0:719  0:000   Found Clover

0:723  0:003  === [ FindDefaultEntry ] ==================================

0:723  0:000  === [ GetEfiBootDeviceFromNvram ] =========================

0:723  0:000  Default boot entry not found

0:723  0:000  DefaultIndex=-1 and MainMenu.EntryCount=8

0:846  0:123  Found Mouse device:

0:847  0:000  GUI ready

2:833  1:986  Boot option Boot0000 not found

2:833  0:000  === [ StartLoader ] =======================================

2:833  0:000  Finally: Bus=99768kHz CPU=3492MHz

2:833  0:000  Loading boot.efi  status=Success

3:040  0:206  GetOSVersion: 10.12.3 (16D32)

3:040  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS

3:040  0:000  Filtering KextPatches:

3:040  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.12.3 | MatchOS: All | MatchBuild: All] ==> allowed

3:040  0:000   - [01]: AppleHDA (10.12-AppleHDA/Realtek ALC...) :: BinPatch :: [OS: 10.12.3 | MatchOS: All | MatchBuild: All] ==> allowed

3:040  0:000   - [02]: AppleHDA (10.9-10.12-AppleHDA/Realtek ALC892) :: BinPatch :: [OS: 10.12.3 | MatchOS: All | MatchBuild: All] ==> allowed

3:040  0:000   - [03]: AppleHDA (AppleHDA/Resources/xml>zml) :: BinPatch :: [OS: 10.12.3 | MatchOS: All | MatchBuild: All] ==> allowed

3:040  0:000   - [04]: AppleHDAController (HD4600_HDMI_Audio-1of2) :: BinPatch :: [OS: 10.12.3 | MatchOS: All | MatchBuild: All] ==> allowed

3:040  0:000   - [05]: AppleHDAController (HD4600_HDMI_Audio-2of2) :: BinPatch :: [OS: 10.12.3 | MatchOS: All | MatchBuild: All] ==> allowed

3:040  0:000  === [ PatchSmbios ] =======================================

3:040  0:000  insert table 9 for dev 0:0

3:040  0:000  Channels: 2

3:040  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23

3:040  0:000  SMBIOS Type 17 Index = 0 => 0 0:

3:040  0:000  BANK0 DIMM0 EMPTY

3:040  0:000  SMBIOS Type 17 Index = 1 => 2 2:

3:040  0:000  BANK1 DIMM0 EMPTY

3:040  0:000  SMBIOS Type 17 Index = 2 => 1 1:

3:040  0:000  BANK0 DIMM1 1600MHz 4096MB

3:040  0:000  SMBIOS Type 17 Index = 3 => 3 3:

3:040  0:000  BANK1 DIMM1 1600MHz 4096MB

3:040  0:000  mTotalSystemMemory = 8192

3:040  0:000  NumberOfMemoryDevices = 4

3:040  0:000  Type20[0]->End = 0x3FFFFF, Type17[2] = 0x1000

3:040  0:000  Type20[1]->End = 0x7FFFFF, Type17[3] = 0x3000

3:040  0:000  Table 131 is present, CPUType=10

3:040  0:000  Change to: 705

3:040  0:000  === [ PatchACPI ] =========================================

3:040  0:000  RSDT 0xBA1DD028

3:040  0:000  FADT from RSDT: 0xBA1DD108

3:040  0:000  XSDT 0xBA1DD080

3:040  0:000  FADT from XSDT: 0xBA1E84D8

3:040  0:000  Xsdt reallocation done

3:040  0:000  old FADT length=10C

3:040  0:000  Apply DsdtFixMask=0x00000000 old way

3:040  0:000     drop _DSM mask=0x0000

3:040  0:000  === [ FixBiosDsdt ] =======================================

3:040  0:000  VideoCard devID=0x4128086

3:040  0:000  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE

3:289  0:248  Audio HDA (addr:0x30000) setting specified layout-id=1 (0x1)

3:289  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE

3:289  0:000  USBADR[1] = 0x1A0000 and PCIe = 0xFFFE

3:538  0:248  Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)

3:538  0:000  USBADR[2] = 0x1D0000 and PCIe = 0xFFFE

3:538  0:000  first CPU found at 7ADF offset 7AE2

3:538  0:000  score candidate at 7ADB

3:538  0:000  score inserted in acpi_cpu_score _PR_

3:538  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_

3:538  0:000  Found PCIROOTUID = 0

3:538  0:000  === [ ACPIDropTables ] ====================================

3:538  0:000  === [ PatchAllSSDT ] ======================================

3:538  0:000  Patch table: SSDT  Cpu0Ist

3:538  0:000   SSDT len = 0x539

3:538  0:000  Patch table: SSDT  CpuPm

3:538  0:000   SSDT len = 0xAD8

3:538  0:000  Patch table: SSDT  SataTabl

3:538  0:000   SSDT len = 0x36D

3:538  0:000  Patch table: SSDT  SaSsdt 

3:538  0:000   SSDT len = 0x3299

3:538  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0

3:538  0:000   Xsdt has tables count=11

3:538  0:000  corrected XSDT length=124

3:538  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8

3:538  0:000  === [ RestSetupOSX ] ======================================

3:538  0:000  EdidDiscovered size=128

3:538  0:000  00 | 00 FF FF FF FF FF FF 00 04 69 C2 23 98 03 00 00

3:538  0:000  16 | 0E 18 01 03 80 35 1F 78 2A 62 75 A3 55 4F A0 27

3:538  0:000  32 | 12 50 54 B7 EF 00 D1 C0 81 40 81 80 95 00 B3 00

3:538  0:000  48 | 71 4F 81 C0 81 00 02 3A 80 18 71 38 2D 40 58 2C

3:538  0:000  64 | 45 00 10 36 21 00 00 1E 00 00 00 FF 00 45 34 4C

3:538  0:000  80 | 4D 54 4A 30 30 30 39 32 30 0A 00 00 00 FD 00 32

3:538  0:000  96 | 55 1C 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC

3:538  0:000  112 | 00 41 53 55 53 20 4D 58 32 33 39 0A 20 20 01 4B

3:538  0:000  Intel Intel HD Graphics 4600 [8086:0412] :: PciRoot(0x0)\Pci(0x2,0x0)

3:538  0:000  Intel GFX revision  =0x6

3:538  0:000  HDA Controller [8086:0C0C] :: PciRoot(0x0)\Pci(0x3,0x0) => setting specified layout-id=1 (0x1)

3:539  0:000  HDA Controller [8086:8C20] :: PciRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1)

3:539  0:000  stringlength = 1586

3:539  0:000  CurrentMode: Width=1920 Height=1080

3:539  0:000  Beginning FSInjection

FSInjectionInstall ...

- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: ACA1A698

FSInjectionInstall ...

- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: ACA1A698

3:542  0:003  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other

3:542  0:000  Custom boot is disabled
 

Attachments

  • org.chameleon.Boot.plist
    910 bytes · Views: 219
  • AppleHDA.kext.zip
    1.7 MB · Views: 93
  • DSDT.aml
    45.7 KB · Views: 110
  • SSDT.aml
    526 bytes · Views: 117
  • ioregtmx86.ioreg
    2.8 MB · Views: 99
attached the additional files that are needed for proper troubleshooting
clover does not use org.chameleon.Boot.plist, attach config.plist
Either HDMI edited dsdt or HDMI audio edited ssdt, not both
Clover is not loading either; where are the files installed?
Clover boot log does not show any azul patches.

Suggest:
1. remove edited dsdt and ssdt
2. run HDMI Audio AppleHDA/cloverHDMI
 
Thanks for the suggestions, toleda! I'm sorry that I haven't provided the correct plist file from the get-go. The clover config.plist is now attached to this post.

I've put the SSDT file from my second post in the /EFI/EFI/CLOVER/ACPI/patched/ folder and I set DropOEM in the SSDT dict (config.plist) to true and now the HDMI output is working.

However, I've noticed that some settings were different now that Clover has booted with the SSDT. I used underscan in the monitor settings submenu of system settings and those were reset now. The underscan slider is still there and I was able to readjust it, but I now have to ask myself if there's anything else that's altered due to the inclusion of this SSDT file?

The underscan thing is the only deviation I've noticed so far, the goal however was just to enable HDMI and leave everything else untouched....

Also: Now that the SSDT is in use, can I update the OS in future instances without losing the HDMI audio output (without editing or patching audio related files etc.)?

Thanks again!
 

Attachments

  • config.plist
    5.8 KB · Views: 215
set DropOEM in the SSDT dict
Remove.
noticed that some settings were different now that Clover has booted with the SSDT
ssdt modifies acpi tables for HDMI audio only, no effect on any video parameters.
can I update the OS in future instances without losing the HDMI audio output
acpi edits, yes; HD4600 HDMI audio controller and Azul config.plist edits are persistent unless a binary changes.
 
What do you mean by "remove"? To set DropOEM to false again because it's superfluous or do you mean to remove the ssdt and set the DropOEM to false?

If I set DropOEM to false, or if I remove it entirely from the config.plist, won't I be able to use any SSDT from the patched folder?
 
Weird... I set DropOEM to false and now there's no HDMI audio option available anymore...

I deleted the SSDT now and left DropOEM as false. I then went with the cloverHDMI 120 patch and the HDMI audio is working again! Thanks for this automated patch, toleda!

Am I correct in assuming that after each update I have to run this cloverHDMI 120 patch?
 
Status
Not open for further replies.
Back
Top