Contribute
Register

HD4000 Samsung np530u3c

Status
Not open for further replies.
kamillo1888

kamillo1888

Joined
Apr 2, 2011
Messages
29
Motherboard
OSX
CPU
Intel Core i5
Graphics
Intel HD4000
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. Android
  2. iOS
Hello everyone.
I am trying to install ML 10.8.3 and i have some troubles with that notebook.

http://www.samsung.com/pl/consumer/...ultra-mobile-pc/ultra-portable/NP530U3C-A03PL

Code: 
Intel Core i5-3317U Dual Core Mobile Processor 
4GB PC3-12800 DDR3 Memory 
128GB Solid State Drive 
13.3" WXGA (1366x768) Display With 1.3 Megapixel Webcam 
Intel HD Graphics 4000 Integrated Graphics 
Gigabit Ethernet, 802.11a/g/n Wireless, Bluetooth 
One USB 3.0, Two USB 2.0, HDMI, 4-in-1 Card Reader 
13,3''.r

lspci -nn 
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:0154] (rev 09) 
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:0166] (rev 09) 
00:14.0 USB Controller [0c03]: Intel Corporation Device [8086:1e31] (rev 04) 
00:16.0 Communication controller [0780]: Intel Corporation Device [8086:1e3a] (rev 04) 
00:1a.0 USB Controller [0c03]: Intel Corporation Device [8086:1e2d] (rev 04) 
00:1b.0 Audio device [0403]: Intel Corporation Device [8086:1e20] (rev 04) 
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:1e10] (rev c4) 
00:1c.3 PCI bridge [0604]: Intel Corporation Device [8086:1e16] (rev c4) 
00:1d.0 USB Controller [0c03]: Intel Corporation Device [8086:1e26] (rev 04) 
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:1e59] (rev 04) 
00:1f.2 SATA controller [0106]: Intel Corporation Device [8086:1e03] (rev 04) 
00:1f.3 SMBus [0c05]: Intel Corporation Device [8086:1e22] (rev 04) 
01:00.0 Network controller [0280]: Atheros Communications Inc. Device [168c:002b] (rev 01) 
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)

Installer from newest UniBeast, clean USB stick.
Also tried with multibeast post installation.

First of all Graphics:
I am trying to enable with device-id string injection in chimera boot with that tutorial: http://www.tonymacx86.com/mountain-...ntain-lion-installation-samsung-np550p5c.html

Nothing works. My gpx shows black screen and displays only on HDMI port.
Trying to do with all HD4000PlatformId in Chimera (strings + HD4000PlatformId flag, GraphicsEnabler mixed) no one works, always i have only HDMI working with Full QE/CI, if flags disabled internal screen works but no QE/CI support.
I don't know where is the problem.

Second:
When i install Voodoo kexts to keyboard and mouse, my screen no working, booting is frozen after bluetooth initialization.

I am trying to install all of kexts attached in above tutorial.

Please help me. Thanks!
 
There is no progress with GPX.
Anyway trying to other fixes attached on this forum, but still no results...
 
kamillo1888 said:
Hello everyone.
I am trying to install ML 10.8.3 and i have some troubles with that notebook.

http://www.samsung.com/pl/consumer/...ultra-mobile-pc/ultra-portable/NP530U3C-A03PL

Code: 
Intel Core i5-3317U Dual Core Mobile Processor 
4GB PC3-12800 DDR3 Memory 
128GB Solid State Drive 
13.3" WXGA (1366x768) Display With 1.3 Megapixel Webcam 
Intel HD Graphics 4000 Integrated Graphics 
Gigabit Ethernet, 802.11a/g/n Wireless, Bluetooth 
One USB 3.0, Two USB 2.0, HDMI, 4-in-1 Card Reader 
13,3''.r

lspci -nn 
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:0154] (rev 09) 
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:0166] (rev 09) 
00:14.0 USB Controller [0c03]: Intel Corporation Device [8086:1e31] (rev 04) 
00:16.0 Communication controller [0780]: Intel Corporation Device [8086:1e3a] (rev 04) 
00:1a.0 USB Controller [0c03]: Intel Corporation Device [8086:1e2d] (rev 04) 
00:1b.0 Audio device [0403]: Intel Corporation Device [8086:1e20] (rev 04) 
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:1e10] (rev c4) 
00:1c.3 PCI bridge [0604]: Intel Corporation Device [8086:1e16] (rev c4) 
00:1d.0 USB Controller [0c03]: Intel Corporation Device [8086:1e26] (rev 04) 
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:1e59] (rev 04) 
00:1f.2 SATA controller [0106]: Intel Corporation Device [8086:1e03] (rev 04) 
00:1f.3 SMBus [0c05]: Intel Corporation Device [8086:1e22] (rev 04) 
01:00.0 Network controller [0280]: Atheros Communications Inc. Device [168c:002b] (rev 01) 
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)

Installer from newest UniBeast, clean USB stick.
Also tried with multibeast post installation.

First of all Graphics:
I am trying to enable with device-id string injection in chimera boot with that tutorial: http://www.tonymacx86.com/mountain-...ntain-lion-installation-samsung-np550p5c.html

Nothing works. My gpx shows black screen and displays only on HDMI port.
Trying to do with all HD4000PlatformId in Chimera (strings + HD4000PlatformId flag, GraphicsEnabler mixed) no one works, always i have only HDMI working with Full QE/CI, if flags disabled internal screen works but no QE/CI support.
I don't know where is the problem.

Second:
When i install Voodoo kexts to keyboard and mouse, my screen no working, booting is frozen after bluetooth initialization.

I am trying to install all of kexts attached in above tutorial.

Please help me. Thanks!
Click to expand...

I don't think there is any such HD4000PlatformId flag in org.chameleon.Boot.plist supported in Chimera. I searched the source code and didn't see it...

The ig-platform-id is fixed at 01660009 for mobile HD4K.

You can, of course, inject other values with device-properties in org.chameleon.Boot.plist. I don't like to use device-properties. It is cryptic, difficult to create, and difficult to understand what they are (you have to decode them with gfxutil, base64, xxd).

I prefer using DSDT injection. We use 01660003 on the ProBook with the standard screen. And 0166004 for ProBook w/ dual-link (1600x900 or greater) screen. For example, here is the patch for the standard screen (I removed Sandy Bridge snb-platform-id):

Code: 
#   Inject HDMI info into GFX0/IGPU   */
into method label _DSM parent_adr 0x00020000 remove_entry;
into device name_adr 0x00020000 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
    If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n
    Return (Package()\n
    {\n
        "hda-gfx",\n 
        Buffer (0x0A) { "onboard-1" },\n
        "AAPL,ig-platform-id",\n
        Buffer (0x04) { 0x03, 0x00, 0x66, 0x01 },\n
    })\n
}\n
end;
 
kamillo1888 said:
DSDT readed from ACPI, Patched and the same result - black Screen :/
Booting from newest chimera.

Maybe this is the problem: http://www.tonymacx86.com/general-h...-management-may-incomplete-unsupported-2.html

have the same result, HDMI works with Full QE/CI.

I have internet connection so i can give TeamViewer connection.
Thank u for help... :(
Click to expand...

Did you make GraphicsEnabler=No? Did you remove device-properties from org.chameleon.Boot.plist? These are all doing the same thing and I don't know who "wins" when multiple techniques are being used.

Also, you should try different ig-platform-id. This is not the kind of thing you can do w/ remote connection...

Sometimes it is necessary to patch AppleIntelFramebufferCapri.kext to customize what the ig-platform-id means. See this thread for more information: http://www.tonymacx86.com/hp-probook/96186-unified-appleintelframebuffercapri-ivy-probooks.html

And double check your work. Be sure to look at your properties in io registry to be sure you're doing it right.
 
Yep, i have read this topic, no changes - trying all platform ID - the same result, other people have the same problems with that notebook, and no one can help :/
trying also downgrade chimera to 1.11 but the same results :/

GE=No GE=Yes -> no changes.
 
kamillo1888 said:
Yep, i have read this topic, no changes - trying all platform ID - the same result, other people have the same problems with that notebook, and no one can help :/
trying also downgrade chimera to 1.11 but the same results :/

GE=No GE=Yes -> no changes.
Click to expand...

Make sure you check ioreg to see that you are actually managing to effect the changes...
 
RehabMan said:
Make sure you check ioreg to see that you are actually managing to effect the changes...
Click to expand...

nothing interesting in ioereg all seems to be good.

What should i find in ioereg? Any specific line?
my generated DSDT has only 38kb :/
 
I will try to generate DSDT from Ubuntu 13.04 Live, then i will check and post results here.
 
kamillo1888 said:
nothing interesting in ioereg all seems to be good.

What should i find in ioereg? Any specific line?
my generated DSDT has only 38kb :/
Click to expand...

You want to check if the ig-platform-id that you're setting in your DSDT is actually present as you expect in the graphics device (probably IGPU or GFX0 depending on what your DSDT calls it... Note: eventually you will want to be sure it is IGPU because that is what enables power management).
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top