Contribute
Register

HD 3000 — macOS Sierra

Status
Not open for further replies.
BruceLee5000 said:
Searching for "UEFI" produces no results, searching for "Legacy" identifies the boot volumes:
Code: 
5:498  0:000  === [ ScanVolumes ] =======================================
5:498  0:000  Found 8 volumes with blockIO
5:498  0:000  - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
5:498  0:000          Result of bootcode detection: bootable unknown (legacy)
5:498  0:000  - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)
5:498  0:000          Result of bootcode detection: bootable unknown (legacy)
5:498  0:000  - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
5:498  0:000          Found optical drive
5:498  0:000  - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,2490DFAE-4F4C-4EF2-807F-21F9D0D7B676,0x28,0x64000)
5:498  0:000          Result of bootcode detection: bootable Clover (clover)
5:499  0:000          This is SelfVolume !!
5:499  0:000  - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,3E234D6A-D333-48B9-8256-3F0E1A508409,0x64028,0x1774B290)
5:499  0:000          Result of bootcode detection: bootable unknown (legacy)
5:499  0:000  - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,2A0B3094-8DA6-4D08-91EB-B2016FF4F6B0,0x177AF2B8,0x135F20)
5:499  0:000  - [06]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,E68D6627-2B76-45EE-975A-E42A5C076405,0x178E51D8,0x57AA850)
5:499  0:000  - [07]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(5,GPT,322C6783-F36E-4B52-BABA-0542295C259A,0x1D08FA28,0x135F20)
5:499  0:000  === [ InitTheme ] =========================================
Click to expand...

If you need help, attach entire Clover bootlog (you are not looking at the right section).
 
Thanks for looking.
Code: 
0:100  0:100  MemLog inited, TSC freq: 3292513832
0:100  0:000 
0:100  0:000  Now is 17.6.2017,  3:52:43 (GMT)
0:100  0:000  Starting Clover revision: 4063 on TianoCore.org EFI
0:100  0:000  Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 9 | OS: 10.12.4 | XCODE: 8.3.2]
0:100  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,2490DFAE-4F4C-4EF2-807F-21F9D0D7B676,0x28,0x64000) @BFFD9D98
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank0/1 A0
0:100  0:000  SmbiosTable.Type17->Vendor = 
0:100  0:000  SmbiosTable.Type17->SerialNumber = 
0:100  0:000  SmbiosTable.Type17->PartNumber = 
0:100  0:000  Type 17 Index = 1
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank2/3 A1
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank4/5 A2
0:100  0:000  SmbiosTable.Type17->Vendor = 
0:100  0:000  SmbiosTable.Type17->SerialNumber = 
0:100  0:000  SmbiosTable.Type17->PartNumber = 
0:100  0:000  Type 17 Index = 3
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank6/7 A3
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'H67N-USB3-B3' with board 'H67N-USB3-B3'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=206A7
0:100  0:000   The CPU supported SSE4.1
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
0:100  0:000  MSR 0xE2 before patch 1E000403
0:100  0:000  MSR 0xCE              00001000_60012100
0:100  0:000  MSR 0x1A0             00850089
0:100  0:000  corrected FLEX_RATIO = E0000
0:100  0:000  MSR 0x1B0             00000000
0:100  0:000  FSBFrequency = 103 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:100  0:000  MaxDiv/MinDiv: 33.0/16
0:100  0:000  Turbo: 34/35/36/37
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 4
0:100  0:000  FSB: 25 MHz
0:100  0:000  CPU: 3400 MHz
0:100  0:000  TSC: 3400 MHz
0:100  0:000  PIS: 100 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 0100 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0101 class=060400
0:100  0:000  PCI (00|01:00.00) : 168C 0030 class=028000
0:100  0:000   - WIFI: Vendor=Atheros
0:100  0:000  PCI (00|00:02.00) : 8086 0112 class=030000
0:100  0:000   - GFX: Model=Intel HD Graphics 3000 (Intel)
0:100  0:000  PCI (00|00:16.00) : 8086 1C3A class=078000
0:100  0:000  PCI (00|00:1A.00) : 8086 1C2D class=0C0320
0:100  0:000  PCI (00|00:1B.00) : 8086 1C20 class=040300
0:100  0:000  PCI (00|00:1C.00) : 8086 1C10 class=060400
0:100  0:000  PCI (00|02:00.00) : 10EC 8168 class=020000
0:100  0:000   - LAN: 0 Vendor=Realtek
0:100  0:000  PCI (00|00:1D.00) : 8086 1C26 class=0C0320
0:100  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
0:100  0:000  PCI (00|00:1F.00) : 8086 1C4A class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 1C02 class=010601
0:100  0:000  PCI (00|00:1F.03) : 8086 1C22 class=0C0500
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 0 bytes
0:103  0:003  EFI\CLOVER\config.plist loaded: Success
0:103  0:000  === [ GetListOfThemes ] ===================================
0:105  0:001  - [00]: BGM
0:107  0:001  - [01]: embedded
0:108  0:000  - [01]: metal
0:109  0:001  - [02]: random
0:109  0:000  - [02]: newyear
0:110  0:001  - [03]: yosemitelogin
0:112  0:001  - [04]: christmas
0:113  0:000  - [05]: tonymacx86
0:115  0:002  - [06]: universe
0:117  0:001  === [ Found config plists ] ===============================
0:119  0:002  - config.plist
0:120  0:001  === [ GetEarlyUserSettings ] ==============================
0:120  0:000  timeout set to 1
0:120  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:120  0:000  KextsToPatch: 5 requested
0:120  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8
0:120  0:000   - [01]: com.apple.iokit.IOAHCIBlockStorage (Enable TRIM for SSD) :: BinPatch :: data len: 11
0:120  0:000   - patch disabled at config
0:120  0:000   - [02]: AppleHDA (10.12-AppleHDA/Realtek ALC...) :: BinPatch :: data len: 4
0:120  0:000   - [03]: AppleHDA (10.9-10.12-AppleHDA/Realtek ALC889) :: BinPatch :: data len: 4
0:120  0:000   - [04]: AppleHDA (AppleHDA/Resources/xml>zml) :: BinPatch :: data len: 6
0:120  0:000  Default theme: tonymacx86
0:120  0:000  === [ LoadDrivers ] =======================================
0:120  0:000  Loading AppleImageCodec-64.efi  status=Success
0:120  0:000  Loading VBoxHfs-64.efi  status=Success
0:121  0:000   - driver needs connecting
0:121  0:000  Loading AppleKeyAggregator-64.efi  status=Success
0:121  0:000  Loading DataHubDxe-64.efi  status=Success
0:121  0:000  Loading AppleUITheme-64.efi  status=Success
0:122  0:000  Loading OsxAptioFix2Drv-64.efi  status=Success
0:122  0:000  Loading FirmwareVolume-64.efi  status=Success
0:122  0:000  Loading FSInject-64.efi  status=Success
0:122  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:122  0:000  Loading SMCHelper-64.efi  status=Success
0:123  0:000  1 drivers needs connecting ...
0:123  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:123  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
5:184  5:061  === [ InitScreen ] ========================================
5:184  0:000  SetScreenResolution: 1920x1080 - not found!
5:184  0:000  SetMaxResolution: found best mode 0: 1024x768
5:363  0:178  Video mode change to mode #0: Success
5:363  0:000   - set
5:363  0:000  Console modes reported: 3, available modes:
5:363  0:000   - [01]: 80x25 (current mode)
5:363  0:000   - [03]: 100x31
5:363  0:000  SetScreenResolution: 1024x768 - already set
5:418  0:055  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,2490DFAE-4F4C-4EF2-807F-21F9D0D7B676,0x28,0x64000)
5:419  0:000  Using embedded font: Success
5:420  0:001  === [ GetMacAddress ] =====================================
5:420  0:000  === [ ScanSPD ] ===========================================
5:420  0:000  SMBus device : 8086 1C22 class=0C0500 status=Success
5:420  0:000  SMBus CmdReg: 0x3
5:420  0:000  Scanning SMBus [8086:1C22], mmio: 0xFBFFB004, ioport: 0x500, hostc: 0x1
5:420  0:000  Slots to scan [8]...
5:421  0:000  SPD[0]: Type 11 @0x50
5:439  0:018  XMP Profile1: 12*1/8ns
5:439  0:000  Found module with XMP version 1.2
5:439  0:000  DDR speed 1333MHz
5:439  0:000  Slot: 0 Type 24 4096MB 1333MHz Vendor=Corsair PartNo=CMX8GX3M2A1333C9 SerialNo=0000000000060308
5:439  0:000  SPD[2]: Type 11 @0x52
5:457  0:018  XMP Profile1: 12*1/8ns
5:457  0:000  Found module with XMP version 1.2
5:457  0:000  DDR speed 1333MHz
5:457  0:000  Slot: 2 Type 24 4096MB 1333MHz Vendor=Corsair PartNo=CMX8GX3M2A1333C9 SerialNo=0000000000060502
5:458  0:000  === [ GetAcpiTablesList ] =================================
5:463  0:005  Get Acpi Tables List from RSDT:
5:463  0:000   - [00]: FACP  GBTUACPI len=116
5:463  0:000   - [01]: MSDM  GBTUACPI len=85
5:463  0:000   - [02]: HPET  GBTUACPI len=56
5:463  0:000   - [03]: MCFG  GBTUACPI len=60
5:463  0:000   - [04]: ASPT  PerfTune len=52
5:463  0:000   - [05]: SSPT  SsptHead len=9040
5:463  0:000   - [06]: MATS   len=52
5:463  0:000   - [07]: TAMG  GBT   B0 len=1458
5:463  0:000   - [08]: APIC  GBTUACPI len=188
5:463  0:000   - [09]: SSDT  PPM RCM  len=8012
5:463  0:000   - [10]: MATS  MATS RCM len=39022
5:463  0:000  Calibrated TSC frequency =3292513832 =3292MHz
5:464  0:000  === [ GetUserSettings ] ===================================
5:464  0:000  Add 1 properties:
5:464  0:000   - [00]: IntelGFX, len: 4
5:464  0:000  USB FixOwnership: yes
5:464  0:000   - final DSDT Fix mask=00008011
5:464  0:000  ResetAddr: 0x64
5:464  0:000  Calc ResetVal: 0xFE
5:464  0:000  ResetVal: 0xFE
5:464  0:000  ChassisType: 0x16
5:464  0:000  Error: invalid CustomUUID '' - should be in the format XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX
5:466  0:001  Invalid smbios.plist, not overriding config.plist!
5:466  0:000  === [ ScanVolumes ] =======================================
5:466  0:000  Found 8 volumes with blockIO
5:466  0:000  - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
5:467  0:000          Result of bootcode detection: bootable unknown (legacy)
5:467  0:000  - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)
5:467  0:000          Result of bootcode detection: bootable unknown (legacy)
5:467  0:000  - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
5:467  0:000          Found optical drive
5:467  0:000  - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,2490DFAE-4F4C-4EF2-807F-21F9D0D7B676,0x28,0x64000)
5:467  0:000          Result of bootcode detection: bootable Clover (clover)
5:467  0:000          This is SelfVolume !!
5:467  0:000  - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,3E234D6A-D333-48B9-8256-3F0E1A508409,0x64028,0x1774B290)
5:467  0:000          Result of bootcode detection: bootable unknown (legacy)
5:467  0:000  - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,2A0B3094-8DA6-4D08-91EB-B2016FF4F6B0,0x177AF2B8,0x135F20)
5:468  0:000  - [06]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,E68D6627-2B76-45EE-975A-E42A5C076405,0x178E51D8,0x57AA850)
5:468  0:000  - [07]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(5,GPT,322C6783-F36E-4B52-BABA-0542295C259A,0x1D08FA28,0x135F20)
5:468  0:000  === [ InitTheme ] =========================================
5:468  0:000  Using theme 'tonymacx86' (EFI\CLOVER\themes\tonymacx86)
5:468  0:000  Loading font from ThemeDir: Error
5:469  0:000  Choosing theme tonymacx86
5:469  0:000  after NVRAM boot-args=slide=0 darkwake=0
5:469  0:000  === [ Dump SMC keys from NVRAM ] ==========================
5:469  0:000  found AppleSMC protocol
5:469  0:000  === [ ScanLoader ] ========================================
5:469  0:000  - [03]: 'EFI'
5:488  0:018  - [04]: 'EL CAPITAN'
5:490  0:002          AddLoaderEntry for Volume Name=EL CAPITAN
5:491  0:001      Check if volume Is Hibernated:
5:491  0:000      Check sleep image 'by signature':
5:493  0:001      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
5:493  0:000      SleepImage name from pref: ImageVolume = 'EL CAPITAN', ImageName = '\private\var\vm\sleepimage'
5:495  0:001      sleepimage not found -> Not Found
5:495  0:000      hibernated: no - sign
5:510  0:014  - [05]: 'Recovery HD'
5:510  0:000          AddLoaderEntry for Volume Name=Recovery HD
5:524  0:014  - [06]: 'SIERRA'
5:527  0:002          AddLoaderEntry for Volume Name=SIERRA
5:528  0:001      Check if volume Is Hibernated:
5:528  0:000      Check sleep image 'by signature':
5:532  0:003      using default sleep image name = \private\var\vm\sleepimage
5:533  0:001      sleepimage not found -> Not Found
5:533  0:000      hibernated: no - sign
5:547  0:013  - [07]: 'Recovery HD'
5:547  0:000          AddLoaderEntry for Volume Name=Recovery HD
5:560  0:013  Scanning legacy ...
5:560  0:000   3: 'EFI' (clover) add legacy
5:562  0:001   added 'Boot Clover from EFI' OSType=3 Icon=clover
5:562  0:000  === [ AddCustomTool ] =====================================
5:563  0:001  found tool \EFI\CLOVER\tools\Shell64U.efi
5:563  0:000  Checking EFI partition Volume 3 for Clover
5:563  0:000   Found Clover
5:566  0:002  === [ GetEfiBootDeviceFromNvram ] =========================
5:566  0:000   - found entry 2. 'Boot macOS from SIERRA', Volume 'SIERRA', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,E68D6627-2B76-45EE-975A-E42A5C076405,0x178E51D8,0x57AA850)\System\Library\CoreServices\boot.efii'
5:566  0:000  DefaultIndex=2 and MainMenu.EntryCount=11
5:711  0:144  GUI ready
7:714  2:003  === [ StartLoader ] =======================================
7:714  0:000  Finally: Bus=99773kHz CPU=3293MHz
7:714  0:000  Loading boot.efi  status=Success
7:776  0:062  GetOSVersion: 10.12.5 (16F73)
7:776  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS
7:776  0:000  Filtering KextPatches:
7:776  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
7:776  0:000   - [01]: com.apple.iokit.IOAHCIBlockStorage (Enable TRIM for SSD) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> disabled by user
7:776  0:000   - [02]: AppleHDA (10.12-AppleHDA/Realtek ALC...) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
7:776  0:000   - [03]: AppleHDA (10.9-10.12-AppleHDA/Realtek ALC889) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
7:776  0:000   - [04]: AppleHDA (AppleHDA/Resources/xml>zml) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
7:776  0:000  === [ PatchSmbios ] =======================================
7:776  0:000  insert table 9 for dev 0:0
7:776  0:000  insert table 9 for dev 0:0
7:777  0:000  Trusting SMBIOS...
7:777  0:000  Channels: 2
7:777  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
7:777  0:000   partNum unknown
7:777  0:000  SMBIOS Type 17 Index = 0 => 0 0:
7:777  0:000  BANK 0 DIMM0 1333MHz 4096MB
7:777  0:000   partNum unknown
7:777  0:000  SMBIOS Type 17 Index = 1 => 2 2:
7:777  0:000  BANK 1 DIMM0 1333MHz 4096MB
7:777  0:000  SMBIOS Type 17 Index = 2 => 1 1:
7:777  0:000  BANK 0 DIMM1 EMPTY
7:777  0:000  SMBIOS Type 17 Index = 3 => 3 3:
7:777  0:000  BANK 1 DIMM1 EMPTY
7:777  0:000  mTotalSystemMemory = 8192
7:777  0:000  NumberOfMemoryDevices = 4
7:777  0:000  Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000
7:777  0:000  Type20[1]->End = 0x0, Type17[1] = 0x3000
7:777  0:000  === [ PatchACPI ] =========================================
7:777  0:000  RSDT 0xC0FA3040
7:777  0:000  FADT from RSDT: 0xC0FA3100
7:777  0:000  Xsdt is not found! Creating new one
7:777  0:000  RsdPointer is Acpi 1.0 - creating new one Acpi 2.0
7:777  0:000  RsdPointer Acpi 2.0 installed
7:777  0:000  RSDT entries = 11
7:777  0:000  Xsdt reallocation done
7:777  0:000  old FADT length=74
7:777  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
7:778  0:001  Apply DsdtFixMask=0x00008011
7:778  0:000     drop _DSM mask=0x0804
7:778  0:000  === [ FixBiosDsdt ] =======================================
7:778  0:000  Found Airport Atheros at 0x10000, 0x0, DeviceID=0x0030
7:778  0:000  VideoCard devID=0x1128086
7:778  0:000  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
7:778  0:000  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
7:808  0:030  Audio HDA (addr:0x1B0000) setting specified layout-id=3 (0x3)
7:808  0:000  USBADR[1] = 0x1D0000 and PCIe = 0xFFFE
7:808  0:000  first CPU found at D2 offset D5
7:808  0:000  score candidate at CE
7:808  0:000  score inserted in acpi_cpu_score _PR_
7:808  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
7:808  0:000  Found PCIROOTUID = 0
7:808  0:000  Start HPET Fix
7:808  0:000  patch HDEF in DSDT
7:808  0:000  Start HDA Fix
7:808  0:000  found HDA device NAME(_ADR,0x001B0000) And Name is HDEF
7:808  0:000  NewName HDEF already present, renaming impossibble
7:808  0:000  _DSM already exists, patch HDA will not be applied
7:808  0:000  === [ ACPIDropTables ] ====================================
7:808  0:000  === [ PatchAllSSDT ] ======================================
7:808  0:000  Patch table: SSDT  PPM RCM  len=0x1F4C
7:808  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
7:808  0:000   Xsdt has tables count=11
7:808  0:000  === [ ACPIPatchedAML ] ====================================
7:808  0:000  Unsorted
7:808  0:000  Inserting SSDT-SB-i5.aml from EFI\CLOVER\ACPI\patched ... Success
7:808  0:000  Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success
7:808  0:000  CPUBase=0 and ApicCPUBase=0 ApicCPUNum=8
7:808  0:000  === [ RestSetup macOS ] ===================================
7:808  0:000  EdidDiscovered size=128
7:808  0:000  ------- EDID Table
7:808  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  59  3A
7:808  0:000  010  |  70  00  01  01  01  01  00  15  01  03
7:808  0:000  020  |  80  30  1B  78  2A  18  15  A4  5D  53
7:808  0:000  030  |  A4  27  13  50  54  A5  46  00  01  01
7:808  0:000  040  |  01  01  01  01  01  01  01  01  01  01
7:808  0:000  050  |  01  01  01  01  02  3A  80  18  71  38
7:808  0:000  060  |  2D  40  58  2C  45  00  DC  0C  11  00
7:808  0:000  070  |  00  1E  64  19  00  40  41  00  26  30
7:808  0:000  080  |  18  88  36  00  DC  0C  11  00  00  18
7:808  0:000  090  |  00  00  00  FC  00  45  32  32  30  56
7:808  0:000  100  |  41  0A  20  20  20  20  20  20  00  00
7:808  0:000  110  |  00  FD  00  3A  4C  1E  46  0F  00  0A
7:808  0:000  120  |  20  20  20  20  20  20  01  7F
7:808  0:000  Intel HD Graphics 3000 [8086:0112] :: PcieRoot(0x0)\Pci(0x2,0x0)
7:808  0:000    Found XGA Display - 4:3 :: Width=1024 Height=768
7:808  0:000    Custom Intel GFX properties injected, continue
7:808  0:000    IntelHDMI: used
7:808  0:000    Default AAPL00,DualLink = 1
7:808  0:000    Low Resolution Display
7:808  0:000    AAPL00,DualLink: changed from 1 to not used
7:808  0:000    FakeID Intel GFX = 0x01268086
7:808  0:000    snb-platform-id: not set
7:808  0:000    Beginning Intel GFX auto-detection with ACPI Injection
7:808  0:000    Found snb-platform-id = 0x00030010
7:808  0:000  Intel GFX revision  = 0x9
7:808  0:000   setting specified layout-id=3 (0x3)
7:809  0:000  stringlength = 1702
7:809  0:000  CurrentMode: Width=1024 Height=768
7:809  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BFFD9718
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BFFD9718
7:809  0:000  Use origin smbios table type 1 guid.
7:810  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
7:810  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12
7:811  0:000  Custom boot is disabled
 
CustoMacMini 2011
GA-H67N-USB3-B3 |  i5 2500K |  HD 3000
RehabMan said:
- OsxAptioFixDrv-64.efi is missing from drivers64UEFI
Click to expand...

This WORKED btw! Thanks!

From what I see discussed online this Gigabyte GA-H67N-USB3-B3 board is some kind of DUALBIOS? Someone on these forums called it a hybrid BIOS. But it's definitely 6 Series. Unibeast and Multibeast say to use Legacy Settings for 5/6 Series. The BIOS is definitely basic and not the more graphically advanced UEFI. But the drivers64UEFI is certainly working. I also have some drivers in the drivers64 folder.
 
CustoMacMini 2011
GA-H67N-USB3-B3 |  i5 2500K |  HD 3000
BruceLee5000 said:
Thanks for looking.
Code: 
0:100  0:100  MemLog inited, TSC freq: 3292513832
0:100  0:000
0:100  0:000  Now is 17.6.2017,  3:52:43 (GMT)
0:100  0:000  Starting Clover revision: 4063 on TianoCore.org EFI
0:100  0:000  Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 9 | OS: 10.12.4 | XCODE: 8.3.2]
0:100  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,2490DFAE-4F4C-4EF2-807F-21F9D0D7B676,0x28,0x64000) @BFFD9D98
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank0/1 A0
0:100  0:000  SmbiosTable.Type17->Vendor =
0:100  0:000  SmbiosTable.Type17->SerialNumber =
0:100  0:000  SmbiosTable.Type17->PartNumber =
0:100  0:000  Type 17 Index = 1
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank2/3 A1
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank4/5 A2
0:100  0:000  SmbiosTable.Type17->Vendor =
0:100  0:000  SmbiosTable.Type17->SerialNumber =
0:100  0:000  SmbiosTable.Type17->PartNumber =
0:100  0:000  Type 17 Index = 3
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = Bank6/7 A3
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'H67N-USB3-B3' with board 'H67N-USB3-B3'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=206A7
0:100  0:000   The CPU supported SSE4.1
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
0:100  0:000  MSR 0xE2 before patch 1E000403
0:100  0:000  MSR 0xCE              00001000_60012100
0:100  0:000  MSR 0x1A0             00850089
0:100  0:000  corrected FLEX_RATIO = E0000
0:100  0:000  MSR 0x1B0             00000000
0:100  0:000  FSBFrequency = 103 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:100  0:000  MaxDiv/MinDiv: 33.0/16
0:100  0:000  Turbo: 34/35/36/37
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 4
0:100  0:000  FSB: 25 MHz
0:100  0:000  CPU: 3400 MHz
0:100  0:000  TSC: 3400 MHz
0:100  0:000  PIS: 100 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 0100 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0101 class=060400
0:100  0:000  PCI (00|01:00.00) : 168C 0030 class=028000
0:100  0:000   - WIFI: Vendor=Atheros
0:100  0:000  PCI (00|00:02.00) : 8086 0112 class=030000
0:100  0:000   - GFX: Model=Intel HD Graphics 3000 (Intel)
0:100  0:000  PCI (00|00:16.00) : 8086 1C3A class=078000
0:100  0:000  PCI (00|00:1A.00) : 8086 1C2D class=0C0320
0:100  0:000  PCI (00|00:1B.00) : 8086 1C20 class=040300
0:100  0:000  PCI (00|00:1C.00) : 8086 1C10 class=060400
0:100  0:000  PCI (00|02:00.00) : 10EC 8168 class=020000
0:100  0:000   - LAN: 0 Vendor=Realtek
0:100  0:000  PCI (00|00:1D.00) : 8086 1C26 class=0C0320
0:100  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
0:100  0:000  PCI (00|00:1F.00) : 8086 1C4A class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 1C02 class=010601
0:100  0:000  PCI (00|00:1F.03) : 8086 1C22 class=0C0500
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 0 bytes
0:103  0:003  EFI\CLOVER\config.plist loaded: Success
0:103  0:000  === [ GetListOfThemes ] ===================================
0:105  0:001  - [00]: BGM
0:107  0:001  - [01]: embedded
0:108  0:000  - [01]: metal
0:109  0:001  - [02]: random
0:109  0:000  - [02]: newyear
0:110  0:001  - [03]: yosemitelogin
0:112  0:001  - [04]: christmas
0:113  0:000  - [05]: tonymacx86
0:115  0:002  - [06]: universe
0:117  0:001  === [ Found config plists ] ===============================
0:119  0:002  - config.plist
0:120  0:001  === [ GetEarlyUserSettings ] ==============================
0:120  0:000  timeout set to 1
0:120  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:120  0:000  KextsToPatch: 5 requested
0:120  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8
0:120  0:000   - [01]: com.apple.iokit.IOAHCIBlockStorage (Enable TRIM for SSD) :: BinPatch :: data len: 11
0:120  0:000   - patch disabled at config
0:120  0:000   - [02]: AppleHDA (10.12-AppleHDA/Realtek ALC...) :: BinPatch :: data len: 4
0:120  0:000   - [03]: AppleHDA (10.9-10.12-AppleHDA/Realtek ALC889) :: BinPatch :: data len: 4
0:120  0:000   - [04]: AppleHDA (AppleHDA/Resources/xml>zml) :: BinPatch :: data len: 6
0:120  0:000  Default theme: tonymacx86
0:120  0:000  === [ LoadDrivers ] =======================================
0:120  0:000  Loading AppleImageCodec-64.efi  status=Success
0:120  0:000  Loading VBoxHfs-64.efi  status=Success
0:121  0:000   - driver needs connecting
0:121  0:000  Loading AppleKeyAggregator-64.efi  status=Success
0:121  0:000  Loading DataHubDxe-64.efi  status=Success
0:121  0:000  Loading AppleUITheme-64.efi  status=Success
0:122  0:000  Loading OsxAptioFix2Drv-64.efi  status=Success
0:122  0:000  Loading FirmwareVolume-64.efi  status=Success
0:122  0:000  Loading FSInject-64.efi  status=Success
0:122  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:122  0:000  Loading SMCHelper-64.efi  status=Success
0:123  0:000  1 drivers needs connecting ...
0:123  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:123  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
5:184  5:061  === [ InitScreen ] ========================================
5:184  0:000  SetScreenResolution: 1920x1080 - not found!
5:184  0:000  SetMaxResolution: found best mode 0: 1024x768
5:363  0:178  Video mode change to mode #0: Success
5:363  0:000   - set
5:363  0:000  Console modes reported: 3, available modes:
5:363  0:000   - [01]: 80x25 (current mode)
5:363  0:000   - [03]: 100x31
5:363  0:000  SetScreenResolution: 1024x768 - already set
5:418  0:055  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,2490DFAE-4F4C-4EF2-807F-21F9D0D7B676,0x28,0x64000)
5:419  0:000  Using embedded font: Success
5:420  0:001  === [ GetMacAddress ] =====================================
5:420  0:000  === [ ScanSPD ] ===========================================
5:420  0:000  SMBus device : 8086 1C22 class=0C0500 status=Success
5:420  0:000  SMBus CmdReg: 0x3
5:420  0:000  Scanning SMBus [8086:1C22], mmio: 0xFBFFB004, ioport: 0x500, hostc: 0x1
5:420  0:000  Slots to scan [8]...
5:421  0:000  SPD[0]: Type 11 @0x50
5:439  0:018  XMP Profile1: 12*1/8ns
5:439  0:000  Found module with XMP version 1.2
5:439  0:000  DDR speed 1333MHz
5:439  0:000  Slot: 0 Type 24 4096MB 1333MHz Vendor=Corsair PartNo=CMX8GX3M2A1333C9 SerialNo=0000000000060308
5:439  0:000  SPD[2]: Type 11 @0x52
5:457  0:018  XMP Profile1: 12*1/8ns
5:457  0:000  Found module with XMP version 1.2
5:457  0:000  DDR speed 1333MHz
5:457  0:000  Slot: 2 Type 24 4096MB 1333MHz Vendor=Corsair PartNo=CMX8GX3M2A1333C9 SerialNo=0000000000060502
5:458  0:000  === [ GetAcpiTablesList ] =================================
5:463  0:005  Get Acpi Tables List from RSDT:
5:463  0:000   - [00]: FACP  GBTUACPI len=116
5:463  0:000   - [01]: MSDM  GBTUACPI len=85
5:463  0:000   - [02]: HPET  GBTUACPI len=56
5:463  0:000   - [03]: MCFG  GBTUACPI len=60
5:463  0:000   - [04]: ASPT  PerfTune len=52
5:463  0:000   - [05]: SSPT  SsptHead len=9040
5:463  0:000   - [06]: MATS   len=52
5:463  0:000   - [07]: TAMG  GBT   B0 len=1458
5:463  0:000   - [08]: APIC  GBTUACPI len=188
5:463  0:000   - [09]: SSDT  PPM RCM  len=8012
5:463  0:000   - [10]: MATS  MATS RCM len=39022
5:463  0:000  Calibrated TSC frequency =3292513832 =3292MHz
5:464  0:000  === [ GetUserSettings ] ===================================
5:464  0:000  Add 1 properties:
5:464  0:000   - [00]: IntelGFX, len: 4
5:464  0:000  USB FixOwnership: yes
5:464  0:000   - final DSDT Fix mask=00008011
5:464  0:000  ResetAddr: 0x64
5:464  0:000  Calc ResetVal: 0xFE
5:464  0:000  ResetVal: 0xFE
5:464  0:000  ChassisType: 0x16
5:464  0:000  Error: invalid CustomUUID '' - should be in the format XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX
5:466  0:001  Invalid smbios.plist, not overriding config.plist!
5:466  0:000  === [ ScanVolumes ] =======================================
5:466  0:000  Found 8 volumes with blockIO
5:466  0:000  - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
5:467  0:000          Result of bootcode detection: bootable unknown (legacy)
5:467  0:000  - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)
5:467  0:000          Result of bootcode detection: bootable unknown (legacy)
5:467  0:000  - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
5:467  0:000          Found optical drive
5:467  0:000  - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,2490DFAE-4F4C-4EF2-807F-21F9D0D7B676,0x28,0x64000)
5:467  0:000          Result of bootcode detection: bootable Clover (clover)
5:467  0:000          This is SelfVolume !!
5:467  0:000  - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,3E234D6A-D333-48B9-8256-3F0E1A508409,0x64028,0x1774B290)
5:467  0:000          Result of bootcode detection: bootable unknown (legacy)
5:467  0:000  - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,2A0B3094-8DA6-4D08-91EB-B2016FF4F6B0,0x177AF2B8,0x135F20)
5:468  0:000  - [06]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,E68D6627-2B76-45EE-975A-E42A5C076405,0x178E51D8,0x57AA850)
5:468  0:000  - [07]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(5,GPT,322C6783-F36E-4B52-BABA-0542295C259A,0x1D08FA28,0x135F20)
5:468  0:000  === [ InitTheme ] =========================================
5:468  0:000  Using theme 'tonymacx86' (EFI\CLOVER\themes\tonymacx86)
5:468  0:000  Loading font from ThemeDir: Error
5:469  0:000  Choosing theme tonymacx86
5:469  0:000  after NVRAM boot-args=slide=0 darkwake=0
5:469  0:000  === [ Dump SMC keys from NVRAM ] ==========================
5:469  0:000  found AppleSMC protocol
5:469  0:000  === [ ScanLoader ] ========================================
5:469  0:000  - [03]: 'EFI'
5:488  0:018  - [04]: 'EL CAPITAN'
5:490  0:002          AddLoaderEntry for Volume Name=EL CAPITAN
5:491  0:001      Check if volume Is Hibernated:
5:491  0:000      Check sleep image 'by signature':
5:493  0:001      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
5:493  0:000      SleepImage name from pref: ImageVolume = 'EL CAPITAN', ImageName = '\private\var\vm\sleepimage'
5:495  0:001      sleepimage not found -> Not Found
5:495  0:000      hibernated: no - sign
5:510  0:014  - [05]: 'Recovery HD'
5:510  0:000          AddLoaderEntry for Volume Name=Recovery HD
5:524  0:014  - [06]: 'SIERRA'
5:527  0:002          AddLoaderEntry for Volume Name=SIERRA
5:528  0:001      Check if volume Is Hibernated:
5:528  0:000      Check sleep image 'by signature':
5:532  0:003      using default sleep image name = \private\var\vm\sleepimage
5:533  0:001      sleepimage not found -> Not Found
5:533  0:000      hibernated: no - sign
5:547  0:013  - [07]: 'Recovery HD'
5:547  0:000          AddLoaderEntry for Volume Name=Recovery HD
5:560  0:013  Scanning legacy ...
5:560  0:000   3: 'EFI' (clover) add legacy
5:562  0:001   added 'Boot Clover from EFI' OSType=3 Icon=clover
5:562  0:000  === [ AddCustomTool ] =====================================
5:563  0:001  found tool \EFI\CLOVER\tools\Shell64U.efi
5:563  0:000  Checking EFI partition Volume 3 for Clover
5:563  0:000   Found Clover
5:566  0:002  === [ GetEfiBootDeviceFromNvram ] =========================
5:566  0:000   - found entry 2. 'Boot macOS from SIERRA', Volume 'SIERRA', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,E68D6627-2B76-45EE-975A-E42A5C076405,0x178E51D8,0x57AA850)\System\Library\CoreServices\boot.efii'
5:566  0:000  DefaultIndex=2 and MainMenu.EntryCount=11
5:711  0:144  GUI ready
7:714  2:003  === [ StartLoader ] =======================================
7:714  0:000  Finally: Bus=99773kHz CPU=3293MHz
7:714  0:000  Loading boot.efi  status=Success
7:776  0:062  GetOSVersion: 10.12.5 (16F73)
7:776  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS
7:776  0:000  Filtering KextPatches:
7:776  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
7:776  0:000   - [01]: com.apple.iokit.IOAHCIBlockStorage (Enable TRIM for SSD) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> disabled by user
7:776  0:000   - [02]: AppleHDA (10.12-AppleHDA/Realtek ALC...) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
7:776  0:000   - [03]: AppleHDA (10.9-10.12-AppleHDA/Realtek ALC889) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
7:776  0:000   - [04]: AppleHDA (AppleHDA/Resources/xml>zml) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
7:776  0:000  === [ PatchSmbios ] =======================================
7:776  0:000  insert table 9 for dev 0:0
7:776  0:000  insert table 9 for dev 0:0
7:777  0:000  Trusting SMBIOS...
7:777  0:000  Channels: 2
7:777  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
7:777  0:000   partNum unknown
7:777  0:000  SMBIOS Type 17 Index = 0 => 0 0:
7:777  0:000  BANK 0 DIMM0 1333MHz 4096MB
7:777  0:000   partNum unknown
7:777  0:000  SMBIOS Type 17 Index = 1 => 2 2:
7:777  0:000  BANK 1 DIMM0 1333MHz 4096MB
7:777  0:000  SMBIOS Type 17 Index = 2 => 1 1:
7:777  0:000  BANK 0 DIMM1 EMPTY
7:777  0:000  SMBIOS Type 17 Index = 3 => 3 3:
7:777  0:000  BANK 1 DIMM1 EMPTY
7:777  0:000  mTotalSystemMemory = 8192
7:777  0:000  NumberOfMemoryDevices = 4
7:777  0:000  Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000
7:777  0:000  Type20[1]->End = 0x0, Type17[1] = 0x3000
7:777  0:000  === [ PatchACPI ] =========================================
7:777  0:000  RSDT 0xC0FA3040
7:777  0:000  FADT from RSDT: 0xC0FA3100
7:777  0:000  Xsdt is not found! Creating new one
7:777  0:000  RsdPointer is Acpi 1.0 - creating new one Acpi 2.0
7:777  0:000  RsdPointer Acpi 2.0 installed
7:777  0:000  RSDT entries = 11
7:777  0:000  Xsdt reallocation done
7:777  0:000  old FADT length=74
7:777  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
7:778  0:001  Apply DsdtFixMask=0x00008011
7:778  0:000     drop _DSM mask=0x0804
7:778  0:000  === [ FixBiosDsdt ] =======================================
7:778  0:000  Found Airport Atheros at 0x10000, 0x0, DeviceID=0x0030
7:778  0:000  VideoCard devID=0x1128086
7:778  0:000  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
7:778  0:000  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
7:808  0:030  Audio HDA (addr:0x1B0000) setting specified layout-id=3 (0x3)
7:808  0:000  USBADR[1] = 0x1D0000 and PCIe = 0xFFFE
7:808  0:000  first CPU found at D2 offset D5
7:808  0:000  score candidate at CE
7:808  0:000  score inserted in acpi_cpu_score _PR_
7:808  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
7:808  0:000  Found PCIROOTUID = 0
7:808  0:000  Start HPET Fix
7:808  0:000  patch HDEF in DSDT
7:808  0:000  Start HDA Fix
7:808  0:000  found HDA device NAME(_ADR,0x001B0000) And Name is HDEF
7:808  0:000  NewName HDEF already present, renaming impossibble
7:808  0:000  _DSM already exists, patch HDA will not be applied
7:808  0:000  === [ ACPIDropTables ] ====================================
7:808  0:000  === [ PatchAllSSDT ] ======================================
7:808  0:000  Patch table: SSDT  PPM RCM  len=0x1F4C
7:808  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
7:808  0:000   Xsdt has tables count=11
7:808  0:000  === [ ACPIPatchedAML ] ====================================
7:808  0:000  Unsorted
7:808  0:000  Inserting SSDT-SB-i5.aml from EFI\CLOVER\ACPI\patched ... Success
7:808  0:000  Inserting SSDT.aml from EFI\CLOVER\ACPI\patched ... Success
7:808  0:000  CPUBase=0 and ApicCPUBase=0 ApicCPUNum=8
7:808  0:000  === [ RestSetup macOS ] ===================================
7:808  0:000  EdidDiscovered size=128
7:808  0:000  ------- EDID Table
7:808  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  59  3A
7:808  0:000  010  |  70  00  01  01  01  01  00  15  01  03
7:808  0:000  020  |  80  30  1B  78  2A  18  15  A4  5D  53
7:808  0:000  030  |  A4  27  13  50  54  A5  46  00  01  01
7:808  0:000  040  |  01  01  01  01  01  01  01  01  01  01
7:808  0:000  050  |  01  01  01  01  02  3A  80  18  71  38
7:808  0:000  060  |  2D  40  58  2C  45  00  DC  0C  11  00
7:808  0:000  070  |  00  1E  64  19  00  40  41  00  26  30
7:808  0:000  080  |  18  88  36  00  DC  0C  11  00  00  18
7:808  0:000  090  |  00  00  00  FC  00  45  32  32  30  56
7:808  0:000  100  |  41  0A  20  20  20  20  20  20  00  00
7:808  0:000  110  |  00  FD  00  3A  4C  1E  46  0F  00  0A
7:808  0:000  120  |  20  20  20  20  20  20  01  7F
7:808  0:000  Intel HD Graphics 3000 [8086:0112] :: PcieRoot(0x0)\Pci(0x2,0x0)
7:808  0:000    Found XGA Display - 4:3 :: Width=1024 Height=768
7:808  0:000    Custom Intel GFX properties injected, continue
7:808  0:000    IntelHDMI: used
7:808  0:000    Default AAPL00,DualLink = 1
7:808  0:000    Low Resolution Display
7:808  0:000    AAPL00,DualLink: changed from 1 to not used
7:808  0:000    FakeID Intel GFX = 0x01268086
7:808  0:000    snb-platform-id: not set
7:808  0:000    Beginning Intel GFX auto-detection with ACPI Injection
7:808  0:000    Found snb-platform-id = 0x00030010
7:808  0:000  Intel GFX revision  = 0x9
7:808  0:000   setting specified layout-id=3 (0x3)
7:809  0:000  stringlength = 1702
7:809  0:000  CurrentMode: Width=1024 Height=768
7:809  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BFFD9718
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BFFD9718
7:809  0:000  Use origin smbios table type 1 guid.
7:810  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
7:810  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12
7:811  0:000  Custom boot is disabled
Click to expand...

This:
Code: 
0:100  0:000  Starting Clover revision: 4063 on TianoCore.org EFI

... indicates UEFI boot (if it was legacy, you would see 'on CloverEFI').
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top