- Joined
- May 9, 2011
- Messages
- 28
- Motherboard
- GA-Z77X-UD5H
- CPU
- i7-3770K
- Graphics
- GeForce GTX 580
- Mac
- Classic Mac
- Mobile Phone
First the hardware:
GTX 480
Gigabyte GA-Z68MA-D2H-B3
Intel Core i3-2015
The backstory:
I originally had Lion working with this build, but then my PSU died, so in the interim I installed ML with a 550 Ti, and wasn't all too pleased. Finally my PSU replacement showed up so I slapped that in, along with the 480, and when trying to boot into that ML install I got the black screen that says to power off the machine. I figured that's fine, I'll just reinstall.
When trying to boot from my USB drive:
I never needed any flags before so tried without, the white apple screen shows up for a bit, then disappears and I get nothing.
I have tried many variations of -v -x -f -s GraphicsEnabler=No, all of which yield the same results.
Any advice would be greatly appreciated. Thanks in advance!
GTX 480
Gigabyte GA-Z68MA-D2H-B3
Intel Core i3-2015
The backstory:
I originally had Lion working with this build, but then my PSU died, so in the interim I installed ML with a 550 Ti, and wasn't all too pleased. Finally my PSU replacement showed up so I slapped that in, along with the 480, and when trying to boot into that ML install I got the black screen that says to power off the machine. I figured that's fine, I'll just reinstall.
When trying to boot from my USB drive:
I never needed any flags before so tried without, the white apple screen shows up for a bit, then disappears and I get nothing.
I have tried many variations of -v -x -f -s GraphicsEnabler=No, all of which yield the same results.
Any advice would be greatly appreciated. Thanks in advance!