Contribute
Register

Haswell early reboot, Mavericks, locked MSRs, and HP Envy 15-J063CL (i7-4700MQ)

Status
Not open for further replies.
what i would say is only COOL!!! i've tried many ways but unfortunately still cant flash my bois, i'll try it soon!

btw i have't jet understood, if the PM works with this kernel? sorry for my poor English :)
 
what i would say is only COOL!!! i've tried many ways but unfortunately still cant flash my bois, i'll try it soon!

btw i have't jet understood, if the PM works with this kernel? sorry for my poor English :)

Yes, PM works. But you must install patched 10.8.5 AppleIntelCPUPowerManagement. And you must use either a Sandy Bridge smbios (and Sandy Bridge SSDT), or one of the Ivy/Haswell ones where the board-id is represented by a plist in IOPlatformPluginFamily.kext/Contents/PlugIns/X86PlatformPlugin.kext/Contents/Resources (combined with an Ivy Bridge SSDT, eg. one with plugin-type injected).
 
Hi Again

The Mach_kernel is very stable...i have messed a lot about and no KP eyet.... :D

But i can't make hd 4600 work get a NO KEXT LOADED on this one:
Chipset Model: Intel HD Graphics 4600 Mobile
Type: GPU
Bus: Built-In
VRAM (Total): 64 MB of Shared System Memory
Vendor: Intel (0x8086)
Device ID: 0x0416
Revision ID: 0x0006
Kernel Extension Info: No Kext Loaded
Displays:
Display:
Resolution: 1024 x 768
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes

tried <key>IGPlatformID</key>
<string>0a260006</string>
<key>IntelAzulFB</key>
<string>11</string>

no dice and mocking about with other values, but nothing happens.
still only have native 1024x768.
 
Hi Again

The Mach_kernel is very stable...i have messed a lot about and no KP eyet.... :D

But i can't make hd 4600 work get a NO KEXT LOADED on this one:
Chipset Model: Intel HD Graphics 4600 Mobile
Type: GPU
Bus: Built-In
VRAM (Total): 64 MB of Shared System Memory
Vendor: Intel (0x8086)
Device ID: 0x0416
Revision ID: 0x0006
Kernel Extension Info: No Kext Loaded
Displays:
Display:
Resolution: 1024 x 768
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes

tried <key>IGPlatformID</key>
<string>0a260006</string>
<key>IntelAzulFB</key>
<string>11</string>

no dice and mocking about with other values, but nothing happens.
still only have native 1024x768.

Boot with "-f" then post ioreg. http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html
 
Cannot boot with -f only
has to be -x -f ?

is that ok for ioreg dump?

Try to connect an HDMI monitor.

Also, you should be trying different IGPlatformIDs and you should disable your nvidia and/or remove the drivers for nvidia. It could be causing a problem.

But yes, the ioreg could be fine as it would tell me if you have the drivers present on the HDD.
 
there you go, thank you for helping, will try other platform ids
UPDDATED
Yes forgot -x -f!!!

HDMI is not starting up, seems like vesa boot on the hd 4600.
(works fine in win8x64)
 

Attachments

  • ioreg envy ts 15.iore.ioreg
    1.8 MB · Views: 212
  • ioreg envy ts 15 -x -f.iore.ioreg
    1.9 MB · Views: 197
tried all IGPlatformIDs
still nothing.

this works on your Envy?

could you post the content of you org.chameleon.boot.plist of the usb and hd?
 
tried all IGPlatformIDs
still nothing.

this works on your Envy?

could you post the content of you org.chameleon.boot.plist of the usb and hd?

Please put detailed specs into your profile. My configuration/process is completely described in post #1.
 
Status
Not open for further replies.
Back
Top