- Joined
- Jun 13, 2012
- Messages
- 34
- Motherboard
- Yo_Mang's 6 Core Editing / Gaming Hackintosh
- CPU
- Intel 3930K Core i7 6 Core
- Graphics
- Gigabyte GTX 670 2GB Windforce OC Edition
- Mac
- Classic Mac
- Mobile Phone
Hey guys,
Hoping that you may be able to help me figure out what is going on with my hackintosh build. I seem to be having a hell of a lot of trouble trying to get my new Haswell machine up and running properly. It is really annoying that all of these parts are listed in the buyers guide, yet the documentation for the install process is very limited! Anyway, here is my setup:
Gigabyte GA-Z87-HD3
Intel i7 4770K
32GB Corsair Vengeance
Gigabyte GTX 660
Sandisk Ultra 256GB SSD
Segate 4TB HDD
TP Link WiFi Card
I have installed OSX 10.8.5 but can only boot in to the OS successfully in safe mode.
When I try to boot with the GPU installed, very quickly I get stuck at the error "PCI Configuration Begin"
When I try to use the on board graphics I get a different error "Missing Bluetooth Controller Transport!"
(Note my system doesn't have Bluetooth but I have read somewhere that it may be caused by a graphics problem?)
I have tried npci=0x2000 and npci=0x3000 with no luck. I have all the recommended BIOS settings in place, except for disabling VT-D. I can't seem to disable VT-D as the option is greyed out and stuck in the "Enabled" position so I have tried using the rolledback AppleACPIPlatform with no success.
Any help with this issue would be greatly appreciated. This new machine is a work editing computer, so I am aiming to have it up and running over the weekend ready for next week.
Thanks for the help!
Cheers
Blake
Hoping that you may be able to help me figure out what is going on with my hackintosh build. I seem to be having a hell of a lot of trouble trying to get my new Haswell machine up and running properly. It is really annoying that all of these parts are listed in the buyers guide, yet the documentation for the install process is very limited! Anyway, here is my setup:
Gigabyte GA-Z87-HD3
Intel i7 4770K
32GB Corsair Vengeance
Gigabyte GTX 660
Sandisk Ultra 256GB SSD
Segate 4TB HDD
TP Link WiFi Card
I have installed OSX 10.8.5 but can only boot in to the OS successfully in safe mode.
When I try to boot with the GPU installed, very quickly I get stuck at the error "PCI Configuration Begin"
When I try to use the on board graphics I get a different error "Missing Bluetooth Controller Transport!"
(Note my system doesn't have Bluetooth but I have read somewhere that it may be caused by a graphics problem?)
I have tried npci=0x2000 and npci=0x3000 with no luck. I have all the recommended BIOS settings in place, except for disabling VT-D. I can't seem to disable VT-D as the option is greyed out and stuck in the "Enabled" position so I have tried using the rolledback AppleACPIPlatform with no success.
Any help with this issue would be greatly appreciated. This new machine is a work editing computer, so I am aiming to have it up and running over the weekend ready for next week.
Thanks for the help!
Cheers
Blake