Contribute
Register

Hangs after first reboot from HDD / EVGA nVidia 1050Ti drivers don't seem to enable

Status
Not open for further replies.
Joined
Aug 22, 2014
Messages
17
Motherboard
ASUSTeK Computer INC. P8Z68-V PRO (LGA1155) 28
CPU
Intel Core i7 2600 @ 3.40GHz 42 Sandy Bridge 32nm Technology
Graphics
EVGA GTX 1050Ti 4GB
Mac
  1. iMac
  2. MacBook Pro
  3. Mac mini
Classic Mac
  1. 512K
  2. Power Mac
  3. Quadra
Mobile Phone
  1. iOS
I am so close! :) :(

So after a successful installation process my Hackintosh will always hang after I first run pretty much any process.
  1. My build process and install goes very well. Using the latest Sierra Uni-beast.
  2. I keep my Multi-beast post installs to the basics. Meaning I don't worry about Audio or Ethernet at this stage.
  3. I then reboot ..
  4. I still need to reboot first with USB Installer, then I boot from "HFS" labeled Sierra Volume. .. Unsure if this is correct or should I know be able to boot off my Installed HFS volume. It was configured as GUID drive. Not master boot record.
Comment

I continue to see "Finder (not responding)" in red text under force quit applications window once I do boot from HFS volume.
my boot volume is not SATA 0 if that makes a difference. It cab be I just gave my WIN10 install as SATA 0 for now.
Still can't get my Graphics Card to work and I have loaded latest WEBsrivers for support of the 1050Ti and Sierra.
I am unsure what revision my MOBO so I am using UEFI. The BIOS is a Modern BIOS so I think UEFI is correct choice.

System Configuration
  • Intel Core i7 2600 @3.4GHz Sandybridge - Overclocking is off
  • EVGA GTX 1050Ti
  • WD2003FZEX-00Z4SAO SATA 2TB
  • 16 GB DDR3 - (MBO is set to 1600Mhz)
  • MOBO- ASUStek P8Z68-V PRO

This is much further than I gat ever gotten. So I anyone can lend a hand thank you.

Cheers
Ivan
 
Solved !!!! Yeah .. Wow this screams.
I think my halting problem was my DDR3 memory DIMMS ! Pretty sure I had a bad stick of DDR3.

I started with 16GB, 2x Corsair Vengeance LP and 2x Kingston KVR .. I then went back the 2 Corsairs. But then it only showed 1x4GB stick. So I switched DIMM slots and lost the 2 sticks Kingston. Now at 8GB. So far no system halts or crashes. Will plug back in the Kingston to compare.

I also noted that I can't get WiFi or Audio running. This also might be an issue with Browsers, at least Safari. Apple Console kept line stating Wifi failed. I have a3rd party N radio/board. Need to pull it to see what brand it is.

So, If anyone can help with Clover Configurator and my P8Z68V-PRO MOBO that will be very helpful.

With Caveat on system uptime, I continue to see on occasion when booting. It clears after 3rd or 4th attempt. Strangely, moving my clover USB boot key resolves but that i could be many coincidences. can anyone comment .. Also I think the boot process is correct as in I always need my Clover boot Key?

OsxAptioFixDrv: Staring overrides for \System\Library\Coreservices\boot.efi
Using reloc block: no, hibernate wake: no
Error Allocating 0x800 pages at 0x000000000ce00000 alloc type 2
Error loading kernel Cache (0x9)
Boot failed, sleeping for 10 seconds before exiting.
 

Attachments

  • Screen Shot 2017-08-20 at 3.53.56 PM.png
    Screen Shot 2017-08-20 at 3.53.56 PM.png
    108 KB · Views: 215
Well. Chrome went very well. As soon as I booted Safari again the APP started crashing. So thinking it is a network WIFI fail ? Anyone have suggestions ?
 
Status
Not open for further replies.
Back
Top