Contribute
Register

[Solved] Hackintosh High Sierra 10.13.2 Gigabyte Z270X-UD5

Status
Not open for further replies.
punggol

punggol

Joined
Mar 25, 2014
Messages
79
Motherboard
Gigabyte Z270X-UD5
CPU
i7-7700K
Graphics
GTX1060, RX 580
Mac
  1. Mac mini
Hackintosh High Sierra 10.13.2

Motherboard Gigabyte Z270X-UD5
Ram Crucial Vengance 16GB
Graphic Card Gigabyte Winforce
Casing Cosair 300R
CPU Cooler Cosair
No Wifi Card Make use of Ethernet
Install to Hard Disk with HFS+ only!!!

What not working
Old Broadcom WiFi Card BCM94460CD with Bluetooth 4.0 (Can anyone confim these)
HDMI (Can anyone please help me how can I make the HDMI sound to work with this build?)

Steps:-

1. Download High Sierra 10.13.2 from Apple Apps Store
2. Download UniBeast 8.1.0 zip
3. Download MultiBeast 10.1.1
4. Go to Disk Utility and Erase your thumb drive.
Click on View and Select the thumb drive and click erase.
Name : USB
Format: Mac OS X Extended Journaled
Scheme: GUI Partitioned Map
5. Install UniBeast 8.1.0. (it will copy the Mac OS High Sierra 10.13.2 from the Application)
6. Copy MultiBeast to the thumb drive.
7. Gigabyte Bios version 1.0
Set Bios Settings:-
1. Go to Save and Edit settings click on Load Optimized Defaults
2. On MIT leave it as it is. Do not change anything.
3. On System leave it as it is. Do not change anything.
4. On Bios:- Under boot option Priorities select USB thumb drive and Hard Disk Second
Fast Boot Disabled
Windows 8/10 Features Other OS
LAN-PXE-Boot-Option ROM Disabled
Storage Boot option Control Legacy
Other PCI devices UEFI
Attempt Secure Boot Disabled
On Peripherals:-
Initial Display output PCIe 1.Slot
Super IO Configuration Both Serial Disabled
USB Configuration XHCI Hand-off Enable
On Chipset:- VT-d Disabled
Internal Graphics Auto
Audio Controller Enable
On Power Do not change anything
On Save and Exit - Select Save and Exit

8. Methods:-
Boot up computer with Thumb Drive
It will load and install
the computer will reboot select the first option on the left
Go to Disk Utility format the Hard Disk
Install MacOS High Sierra
After install the mac OS it reboot, select HFS+ if you are installing in the Hard Disk
Continued the procedure.... keep selecting HFS+
It will reboot the system again and again continue the procedure ...keep . selecting HFS+
Install to the Hard Disk that you have formatted
System Restart Keep Selecting HFS+
Until you have to type your user name and password, icloud, etc....

Once it is fully install Mac OS High Sierra. Connect the RJ45 to the Ethernet and the Wifi Router.
Go to the Apple App Store download the the patches one by one...
( i download the updated apps, e.g., iIunes and 10.13.2 Supplement)

System will reboot, make sure the UniBeast thumb drive is still on the computer.
It will continue to install the Mac OS 10.13.2 apps/updates which you download from Apple App Store.

Once completed, then download the Nvidia Driver - Web Driver-378.10.10.10.25.104.pkg
from tonymac website
https://www.tonymacx86.com/threads/...s-high-sierra-10-13-2-378-10-10-10-25.239852/
or Nvidia
https://images.nvidia.com/mac/pkg/378/WebDriver-378.10.10.10.25.104.pkg
And install the driver.
System will reboot and select HFS+

Then download Nvidia Cuda for mac from this site.
http://www.nvidia.com/object/mac-driver-archive.html
And install.

After that install MultiBeast 10.1.1
under Quick Start, select UEFI Boot Mode
under Drivers, audio select Realtek ALC1220
under Misc, select FakeSMC
under Network, select Intel Mausi Ethernet version 2.3.0 or 2.2.0
under USB, select increase max port limit
under Bootloaders, select Clover UEFI Boot Mode + Emulated NVRAM
under Customize, select Graphic Card Inject Nvidia
under System Definitions, select iMac 14.2
click on build and click install (i do twice for this)

Go to BIOS settings change the option to hard disk.


Next Download Clover Configurator from this link
http://mackie100projects.altervista.org/download-clover-configurator/

Run Clover Configurator
Select Mount EFI
Mount Partition
Click Start Screen and select EFI EFI CLOVER Config.plist
Go to Boot select nvda_drv=1
Go to System Parameters select NvidiaWeb
Then Save.

Then reboot the computer, login and see the system preferences Nvidia Cuda detect the Nvidia Web Drivers automatically!
Under System Preferences, select Nvidia Drivers managers to confirm that Nvidia Web Driver is selected!
You can update your driver by select Updates check now.

Now the Fixing the Audio for ALC1220 for the Gigabyte Z270X-UD5
Run Clover Configurator
Mount EFI
Open Partition, select EFI, CLOVER, kexts, 10.13 and Other.
Download AppleALCkext, download
https://github.com/vit9696/AppleALC/releases/download/1.2.1/1.2.1.RELEASE.12.11.17.zip
Download Lilu.kext
https://github.com/vit9696/Lilu/releases/download/1.2.1/1.2.1.RELEASE.zip

Take note of this 2 links.
https://github.com/vit9696/AppleALC/releases
https://github.com/vit9696/Lilu/releases/

Unzip the 2 files 1.2.1.Release.12.11.17.zip and 1.2.1Release.zip

Download HDMIAudio.kext (Download the file ALC1220fix.zip)

Copy all the 3 files with Clover Configurator Open Partition, EFI,Clover,kexts,10.13 and Other.

Open Clover Configurator Start Screen, select config.plist under EFI,EFI,CLOVER,Config.plist

Go to ACPI, under DSDT Patches, select list of patches, change HDAS to HDEF
Go to Devices, under USB, select Inject, Add ClockID, Fix Ownership
Go to Audio, select Reset HDA, and under Inject key in 11

Click Save.

Run MultiBeast 10.1.1 again this time round install audio driver ALC1220.
Restart your MacOs High Sierra 10.13.2
Go to Finder, About this mac. System Report, Check the Nvidia Graphic GTX1060 Nvram is 6GB.
Then Select System Report. Go to Audio. Check the driver ALC1220 is successfully installed.

References:-

Under Audio

Devices:



Built-in Line Input:



Default Input Device: Yes

Input Channels: 2

Manufacturer: Apple Inc.

Current SampleRate: 44100

Transport: Built-in

Input Source: Line In



Built-in Output:



Manufacturer: Apple Inc.

Output Channels: 2

Current SampleRate: 44100

Transport: Built-in

Output Source: Line Out



Built-in Line Output:



Manufacturer: Apple Inc.

Output Channels: 2

Current SampleRate: 44100

Transport: Built-in

Output Source: Line Out



Built-in Line Output:



Manufacturer: Apple Inc.

Output Channels: 2

Current SampleRate: 44100

Transport: Built-in

Output Source: Line Out



Built-in Digital Output:



Default Output Device: Yes

Default System Output Device: Yes

Manufacturer: Apple Inc.

Output Channels: 2

Current SampleRate: 44100

Transport: Built-in

Output Source: Digital Out


Under Graphics....

NVIDIA GeForce GTX 1060 6GB:



Chipset Model: NVIDIA GeForce GTX 1060 6GB

Type: GPU

Bus: PCIe

PCIe Lane Width: x16

VRAM (Total): 6 GB

Vendor: NVIDIA (0x10de)

Device ID: 0x1c03

Revision ID: 0x00a1

ROM Revision: VBIOS 86.06.45.00.95

Metal: Supported, feature set macOS GPUFamily1 v3

Displays:

LG TV:

Resolution: 1920 x 1080 @ 60Hz (1080p)

Framebuffer Depth: 24-Bit Color (ARGB8888)

Main Display: Yes

Mirror: Off

Online: Yes

Rotation: Supported

Automatically Adjust Brightness: No

Television: Yes


Lastly, Plug in your External Speakers to your motherboard Gigabyte Z270X-UD5 sound card (green socket)
Go to youtube and test if the sound is working.
 

Attachments

  • ALC1220fix.zip
    3.7 MB · Views: 135
Last edited by a moderator:
punggol said:
Hackintosh High Sierra 10.13.2

Motherboard Gigabyte Z270X-UD5
Ram Crucial Vengance 16GB
Graphic Card Gigabyte Winforce
Casing Cosair 300R
CPU Cooler Cosair
No Wifi Card Make use of Ethernet
Install to Hard Disk with HFS+ only!!!

What not working
Old Broadcom WiFi Card BCM94460CD with Bluetooth 4.0 (Can anyone confim these)
HDMI (Can anyone please help me how can I make the HDMI sound to work with this build?)

Steps:-

1. Download High Sierra 10.13.2 from Apple Apps Store
2. Download UniBeast 8.1.0 zip
3. Download MultiBeast 10.1.1
4. Go to Disk Utility and Erase your thumb drive.
Click on View and Select the thumb drive and click erase.
Name : USB
Format: Mac OS X Extended Journaled
Scheme: GUI Partitioned Map
5. Install UniBeast 8.1.0. (it will copy the Mac OS High Sierra 10.13.2 from the Application)
6. Copy MultiBeast to the thumb drive.
7. Gigabyte Bios version 1.0
Set Bios Settings:-
1. Go to Save and Edit settings click on Load Optimized Defaults
2. On MIT leave it as it is. Do not change anything.
3. On System leave it as it is. Do not change anything.
4. On Bios:- Under boot option Priorities select USB thumb drive and Hard Disk Second
Fast Boot Disabled
Windows 8/10 Features Other OS
LAN-PXE-Boot-Option ROM Disabled
Storage Boot option Control Legacy
Other PCI devices UEFI
Attempt Secure Boot Disabled
On Peripherals:-
Initial Display output PCIe 1.Slot
Super IO Configuration Both Serial Disabled
USB Configuration XHCI Hand-off Enable
On Chipset:- VT-d Disabled
Internal Graphics Auto
Audio Controller Enable
On Power Do not change anything
On Save and Exit - Select Save and Exit

8. Methods:-
Boot up computer with Thumb Drive
It will load and install
the computer will reboot select the first option on the left
Go to Disk Utility format the Hard Disk
Install MacOS High Sierra
After install the mac OS it reboot, select HFS+ if you are installing in the Hard Disk
Continued the procedure.... keep selecting HFS+
It will reboot the system again and again continue the procedure ...keep . selecting HFS+
Install to the Hard Disk that you have formatted
System Restart Keep Selecting HFS+
Until you have to type your user name and password, icloud, etc....

Once it is fully install Mac OS High Sierra. Connect the RJ45 to the Ethernet and the Wifi Router.
Go to the Apple App Store download the the patches one by one...
( i download the updated apps, e.g., iIunes and 10.13.2 Supplement)

System will reboot, make sure the UniBeast thumb drive is still on the computer.
It will continue to install the Mac OS 10.13.2 apps/updates which you download from Apple App Store.

Once completed, then download the Nvidia Driver - Web Driver-378.10.10.10.25.104.pkg
from tonymac website
https://www.tonymacx86.com/threads/...s-high-sierra-10-13-2-378-10-10-10-25.239852/
or Nvidia
https://images.nvidia.com/mac/pkg/378/WebDriver-378.10.10.10.25.104.pkg
And install the driver.
System will reboot and select HFS+

Then download Nvidia Cuda for mac from this site.
http://www.nvidia.com/object/mac-driver-archive.html
And install.

After that install MultiBeast 10.1.1
under Quick Start, select UEFI Boot Mode
under Drivers, audio select Realtek ALC1220
under Misc, select FakeSMC
under Network, select Intel Mausi Ethernet version 2.3.0 or 2.2.0
under USB, select increase max port limit
under Bootloaders, select Clover UEFI Boot Mode + Emulated NVRAM
under Customize, select Graphic Card Inject Nvidia
under System Definitions, select iMac 14.2
click on build and click install (i do twice for this)

Go to BIOS settings change the option to hard disk.


Next Download Clover Configurator from this link
http://mackie100projects.altervista.org/download-clover-configurator/

Run Clover Configurator
Select Mount EFI
Mount Partition
Click Start Screen and select EFI EFI CLOVER Config.plist
Go to Boot select nvda_drv=1
Go to System Parameters select NvidiaWeb
Then Save.

Then reboot the computer, login and see the system preferences Nvidia Cuda detect the Nvidia Web Drivers automatically!
Under System Preferences, select Nvidia Drivers managers to confirm that Nvidia Web Driver is selected!
You can update your driver by select Updates check now.

Now the Fixing the Audio for ALC1220 for the Gigabyte Z270X-UD5
Run Clover Configurator
Mount EFI
Open Partition, select EFI, CLOVER, kexts, 10.13 and Other.
Download AppleALCkext, download
https://github.com/vit9696/AppleALC/releases/download/1.2.1/1.2.1.RELEASE.12.11.17.zip
Download Lilu.kext
https://github.com/vit9696/Lilu/releases/download/1.2.1/1.2.1.RELEASE.zip

Take note of this 2 links.
https://github.com/vit9696/AppleALC/releases
https://github.com/vit9696/Lilu/releases/

Unzip the 2 files 1.2.1.Release.12.11.17.zip and 1.2.1Release.zip

Download HDMIAudio.kext (Download the file ALC1220fix.zip)

Copy all the 3 files with Clover Configurator Open Partition, EFI,Clover,kexts,10.13 and Other.

Open Clover Configurator Start Screen, select config.plist under EFI,EFI,CLOVER,Config.plist

Go to ACPI, under DSDT Patches, select list of patches, change HDAS to HDEF
Go to Devices, under USB, select Inject, Add ClockID, Fix Ownership
Go to Audio, select Reset HDA, and under Inject key in 11

Click Save.

Run MultiBeast 10.1.1 again this time round install audio driver ALC1220.
Restart your MacOs High Sierra 10.13.2
Go to Finder, About this mac. System Report, Check the Nvidia Graphic GTX1060 Nvram is 6GB.
Then Select System Report. Go to Audio. Check the driver ALC1220 is successfully installed.

References:-

Under Audio

Devices:



Built-in Line Input:



Default Input Device: Yes

Input Channels: 2

Manufacturer: Apple Inc.

Current SampleRate: 44100

Transport: Built-in

Input Source: Line In



Built-in Output:



Manufacturer: Apple Inc.

Output Channels: 2

Current SampleRate: 44100

Transport: Built-in

Output Source: Line Out



Built-in Line Output:



Manufacturer: Apple Inc.

Output Channels: 2

Current SampleRate: 44100

Transport: Built-in

Output Source: Line Out



Built-in Line Output:



Manufacturer: Apple Inc.

Output Channels: 2

Current SampleRate: 44100

Transport: Built-in

Output Source: Line Out



Built-in Digital Output:



Default Output Device: Yes

Default System Output Device: Yes

Manufacturer: Apple Inc.

Output Channels: 2

Current SampleRate: 44100

Transport: Built-in

Output Source: Digital Out


Under Graphics....

NVIDIA GeForce GTX 1060 6GB:



Chipset Model: NVIDIA GeForce GTX 1060 6GB

Type: GPU

Bus: PCIe

PCIe Lane Width: x16

VRAM (Total): 6 GB

Vendor: NVIDIA (0x10de)

Device ID: 0x1c03

Revision ID: 0x00a1

ROM Revision: VBIOS 86.06.45.00.95

Metal: Supported, feature set macOS GPUFamily1 v3

Displays:

LG TV:

Resolution: 1920 x 1080 @ 60Hz (1080p)

Framebuffer Depth: 24-Bit Color (ARGB8888)

Main Display: Yes

Mirror: Off

Online: Yes

Rotation: Supported

Automatically Adjust Brightness: No

Television: Yes


Lastly, Plug in your External Speakers to your motherboard Gigabyte Z270X-UD5 sound card (green socket)
Go to youtube and test if the sound is working.
Click to expand...

  • I liked your detailed post that should be very helpful to many new into Hackintoshing and also those who have chosen the same or very similar Intel 200 Series MoBo and Nvidia 1060Graphics.
    • Did you notice you have forgotten to include the Intel CPU used in the build in your SPECS!
    • Adding all major hardware to your Build Signature would make it even better.
  • I have however a couple of questions to clarify:
  • In your USB Installer creation using Unibeast 8.1.0, you have not mentioned which "Boot Mode" (Legacy vs UEFI) you have selected for the macOS High Sierra USB installer disk.
    • For most but not all, for the intel 200 series MoBo /CPU combination , UEFI Boot mode should be the obvious choice. For a detailed write up like this , I consider clarifying that is important to make it a complete manual.
    • Did you have any problem during boot during the initial Installation step using your USB Installer with Nvidia Graphics 1060 as the PCIE Graphics and Internal Graphics: Auto in the BIOS? In most cases I had and the ones I have seen on this Forum , it causes a Graphics related boot failure requiring Physically removing the add on PCIE card and performing initial installation using the onboard Intel HD Graphics supported by the CPU ( since your CPU is not in the SPECS cannot comment on the exact Intel HD IGFX in the setup) and installing the PCIE card as second step after establishing a fully functional system using Integrated Intel HD Graphics.
    • In the BIOS, the choice of "Storage Boot option Control: Legacy " seems to me at odds with a UEFI booting
    • For Nvidia GTX 1060 , after installing Webdriver corresponding to the macOS High Sierra Version, and installing latest Lilu.kext and Nvidia GraphicsFixup.kext to /S/L/E using a tool like Kext Wizard and pasting the two of them into /EFI/CLOVER/kexts/Other , editing config.plist >Boot Args to uncheck (remove the [√]) from [√]nvda_drv=1 is the recommended step. Your suggestion is "Go to Boot select nvda_drv=1"
  • In a write up of this size, I know a few errors can occur . I hope my comments are meant to help and not a harsh criticism.
 
Build Intel 9 Series
GA-Z97X-UD5H |  i3 Other |  GeForce Other
Build Intel 6 series
GA-H61M-HD2 |  i3 3245 |  GeForce Other
Build Intel 7 Series-1
GA-Z77X-UP4-TH |  i7 3770S |  HD 4000
Build Intel 7 Series-2
GA-H77-DS3H |  i5 Other |  GeForce Other
Build GA-B270M-D3H
GA-H270M-D3H |  i7 6700K |  GeForce Other
Hi cmn699,

Thank you for your feedback, I am appreciated with your help, i will changed those settings which you have informed. And try again.

In a rush hour with 4 days in a row of trial and errors doing this hackintosh without any sleeps trying to solve issues which i need to iron out to make this build works.

I forgotten to include the CPU settings,

The CPU for this build is intel core i7 7700K.
Kaby Lake 7th Generation CPU.

The cpu cooler is cooler master hyper H410R.

The power supply is Cooler master v650.

The graphic card is Gigabyte Geforce GTX 1060 6 GB.

The motherboard Gigabyte Z270X-UD5 Bios is still revision 1.0.

The bios settings that i do is Legacy. I will switch to UEFI and try again.

Yes, i set to auto. It work while install macos high sierra 10.13.2.

The most important part is the bios settings otherwise it will not install the macos.

There are issues,the nvidia drivers 104.
The graphic tend to be mess up. After the doing the nvram patching with clover.

I run into problems.

The general tip is ....

After installing macos high sierra 10.13.2 with multibeast and after doing the 10.13.2 supplement updates it will get stuck and will fail the installation completely.

So after so much trial and error, after the full macos 10.13.2 installation, what i do is to go to the apple app store and download the itunes and 10.13.2 supplement immediately with the unibeast bootloader still plugging in the computer.

Then it will install the 2 patches succesfully.

After that you install the nvidia drivers and cuda,

Then you install multibeast.

If you install the macos and multibeast first and download the software updates it will not successfully install the patches.

Then you have to fix the ALC1220 sound and driver issues.

I can't seems to get the hdmi sound issues to work at this time.

So you have to use an external speakers to plug in to the audio connector.
 
(Information Updated!) -FIXING STUCK ISSUES AFTER DOING APPLE SOFTWARE UPDATES!

To prevent from Mac OS updates getting stuck while updating the Mac OS High Sierra ....
Download FakeSMC.kext from tonymac and install FakeSMC kext to EFI,EFI,CLOVER,kext

To do that... all you need to do is to

Open Clover Configurator
Go to Mount EFI
Mount Partitioned
Open Partition
Go to EFI, EFI,CLOVER,kexts,10.13
Copy FakeSMC.kext to that folder.
Again Go to EFI,EFI,CLOVER,kexts,other
Copy FakeSMC.kext to that folder.
Go to Mount EFI
Unmount Partitioned.

Once you done that, Unmount Partitioned by going to MOUNT EFI from your Install MacOS Hard Disk.
Which indicate the Current Boot Disk.

Make sure you do this before doing any Apple Software Updates!

Since NVIDIA did not release a new driver for the latest MACOS.

You need to use Clover Configurator, and Inject Intel.

All you need to do is ...

Open Clover Configurator
Mount EFI
Go to Start Screen (The Home Button or Icon)
Go to EFI,EFI,Clover,Config.plist
Go to Graphic Inject Intel.
Save.
Go back to Mount EFI.
Unmount Partitioned.

I decide to go to the Bios settings again.
Go to Chipset Setting of the Bios.
Internal Graphics to Auto.

If you come across errors such as MacOs cannot be install due to osinstall.mpkg damage.
Reboot your computer, do a Disk Utility First Aid, Re update the MacOS from apple apps store again.
And reboot.... wait till it install the MacOS successfully. The System will reboot and install MacOS.

Always remember if you are using Nvidia Web Graphic Card and if there is a new MacOS updates version.
Nvidia did not have the latest release version for the new MacOS High Sierra version update.

For instance, you are currently running 10.13.2 and there is 10.13.3 updates.
Nvidia did not have the new version release for the 10.13.3 MacOS updates.
You have to wait till it release.

Make sure the EMUVariableUefi64.efi is still intact at EFI,CLOVER,Driver64UEFI.
Otherwise you need to reinstall it with Clover EFI installer.

Check for any hiccups for the audio...
Go to Finder,
Go to Apple Logo on the Top Left Corner
About this Mac,
Go to System Report,
Check to see the Audio Driver is detected and working.

You can always go to Youtube and watch video to see if the audio is working.
 
punggol said:
The motherboard Gigabyte Z270X-UD5 Bios is still revision 1.0.
The CPU for this build is intel core i7 7700K.
The graphic card is Gigabyte Geforce GTX 1060 6 GB.
Click to expand...
Please update your profile (personal details) with your Motherboard or Make/Model, CPU and Graphics Card.
The Rules said:
Profiles need to contain at least your primary system to assist others with helping you.
Click to expand...
 
punggol said:
Woohoo! Nvidia Drivers for the Macos High Sierra 10.13.3 is here.... 378.10.10.10.25.156.

Download link.
http://www.nvidia.com/download/driverResults.aspx/130460/en-us

But NVIDIA CUDA Need a new version to update to support MacOS High Sierra 10.13.3!
Click to expand...
As Moderator BreBo pointed out , your Profile does not show any Hardware Specifications. That is one thing that is lacking in your otherwise good post. Please edit personal details and fill the appropriate blocks there, to comply with the Forum rules all who post here have to follow, especially those of us who post here to help others.
 
Build Intel 9 Series
GA-Z97X-UD5H |  i3 Other |  GeForce Other
Build Intel 6 series
GA-H61M-HD2 |  i3 3245 |  GeForce Other
Build Intel 7 Series-1
GA-Z77X-UP4-TH |  i7 3770S |  HD 4000
Build Intel 7 Series-2
GA-H77-DS3H |  i5 Other |  GeForce Other
Build GA-B270M-D3H
GA-H270M-D3H |  i7 6700K |  GeForce Other
Okay got the CUDA Driver updated!
 
Fixing shutdown and reboot by itself issues.


Here is the Solution:-

Open up Clover Configurator.
Mount EFI. (Hard disk that install macos)
Mount Partitioned.
Click the Start Screen which is the Home button icon below (left bottom)
Select EFI,EFI,Clover,config.plist
Go to ACPI select or tick fixshutdown.
Then Save.

Next go to Mount EFI.
Make sure Mount Partioned is selected.
Then click Open Partitioned.
Go to EFI,EFI,Clover,config.plist
Now before you do this make sure you have download the plist editor.
Under config.plist right mouse button click select open plist editor.
Below look for a string FixShutdown.
Keep scrolling down until you found the FixShutdown.
What you do next is to edit and insert or just add in _0004 just next to FixShutdown.
So it should be FixShutdown_0004
Save the config.plist file
Next go back to mount EFI
Unmount portioned
And exit Clover configurator.

And test to see if the computer shutdown totally.

It should fix the shutdown issues.
Without rebooting after shutting down
the computer. Wait for it to fully shutdown the computer. Until you get No signal on your LED Monitor.

The problem have been fixed!
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top