H87N-Wifi & Clover Help

[AppleFreak111]

After a day of fiddling, I finally got the system booting, but are left with some problems:
I have both Intel & Atheros kext injected by Clover, but somehow these two cards have the same mac address (and neither are en0, they're en1 & en2)! Which I suspect is why I can't use iCloud & iMessage.

Another problem is the graphics card, somehow it's not as smooth as it was in ML, I'm guessing it's because of my config.plist or something is out of order. Anyway, can someone take a look at my config.plist and tell me if there's anything wrong?
I tried my best reading the wiki and setting the file as hard as I can but still having some issues...

Another minor problem is, at HWMonitor, my PCH Die have a very high temperature, 127C! Maybe some patches are off?

MB: GA-H87N-Wifi Rev. 2
GFX: Asus ENGTX460
By the way, I don't have and DSDT or SSDT file, should I use them?

Theses are under /EFI/CLOVER/kexts/10.9:
ACPISensors.kext
ALXEthernet.kext
AppleIntelE100e.kext
CPUSensors.kext
FakeSMC.kext
GPUSensors.kext
LPCSensors.kext
VoodooHDA.kext

/EFI/CLOVER/driver64UEFI:
FSInject-64.efi
HFSPlus.efi
OsxAptioFixDrv-64.efi
OsxFatBinaryDrv-64.efi

And here is my config.plist, please take a look...
Any help would be appreciated! Thanks

 

[xpamamadeus]

Hi.
First of all install kexts in S/L/E.
Delete:
ACPISensors.kext
and
VoodooHDA.kext.

Make DSDT patch request here http://www.tonymacx86.com/dsdt/99822-gigabyte-dsdt-patch-repository-maciasl.html
when done install dsdt

Install applehda from multibeast (one for 892 with dsdt)

Remove all network adapters from list and re add them in correct order to get imessage to work.
And last one use this modifed config.plist.
View attachment config.plist

Enjoy!

 

[AppleFreak111]

Sorry that I have to bump this...
PJALM hasn't reply since, and it seems to me the patch repository domain name has expired...
Is there anyway that I can make or "figure out" patches on my own?? Thanks!

 

[coolqf]

Hi.

I have the exact same setup but without a dedicated video card. Can you modify this config file or tell me what to do to modify it?

Edit: I figured it out. However, how do I configure it so that the system automatically loads my mac HD? I have to manually select the HD for it to start loading. I have a bluetooth keyboard, which makes this a pain because I have to install a usb keyboard

 

[Going Bald]

Hi.

I have the exact same setup but without a dedicated video card. Can you modify this config file or tell me what to do to modify it?

Edit: I figured it out. However, how do I configure it so that the system automatically loads my mac HD? I have to manually select the HD for it to start loading. I have a bluetooth keyboard, which makes this a pain because I have to install a usb keyboard

You could wait 5 seconds for it to go ahead and boot itself or you could further edit your config.plist to shorten the 5 seconds wait time.
If you don't dual boot set it for 0 and you never see the clover screen.

 

[coolqf]

Thanks. It's up and running now. I have one more thing I can't figure out... How to I install ALC892 with DSDT? I currently have OS X 10.9.2, but can't install with DSDT and actually get sound. I can only get ALC892 without DSDT working.

I've tried to understand the guides here, but they're confusing:
https://github.com/toleda/audio_CloverALC
https://github.com/toleda/audio_ALC892

I just can't figure it out.

What I've tried: installing ALC892 with DSDT from multibeast. i still have a backup of my original AppleHDA kext.

 

[Going Bald]

Thanks. It's up and running now. I have one more thing I can't figure out... How to I install ALC892 with DSDT? I currently have OS X 10.9.2, but can't install with DSDT and actually get sound. I can only get ALC892 without DSDT working.

I've tried to understand the guides here, but they're confusing:
https://github.com/toleda/audio_CloverALC
https://github.com/toleda/audio_ALC892

I just can't figure it out.

What I've tried: installing ALC892 with DSDT from multibeast. i still have a backup of my original AppleHDA kext.

You do not need a DSDT unless you want audio over HDMI, in which case see http://www.tonymacx86.com/hdmi-audio/

To get audio from back panel connectors use MultiBeast to install ALC892 without DSDT. This installs a modified AppleHDA.kext and a HDAEnabler.kext to S/L/E.

 

[coolqf]

I'm trying to do a clean install of Clover. I know i've done something wrong with my config file. When I've followed the instructions here exactly as listed:
http://cloverboot.weebly.com/
But, when I hit 'space bar' on inject kexts and try to install OSX 10.9 from USB it just ignores the command. If I try the same to load my installation of OSX it works. Any ideas what's wrong with my config file?

 

[Strik9]

Any news on this. I've got the same setup and i'd like to try installing Clover. i'm using multibeast for now.