- Joined
- Jul 10, 2011
- Messages
- 52
- Motherboard
- Gigabyte Z390 Aorus Pro - F12
- CPU
- i9-9900K
- Graphics
- RX 580
- Mobile Phone
Hey,
I recently installed HS on my Sandybridge 2600k and UD3 motherboard.Its OCed to 4.6, using imac 14.2. Its been running fine but I ran MSR dumper and it says im only getting 16 46 and 47 Pstates. Istats shows the cores cycling through probably a dozen or so clocks between 16 and 47. Under slight load istat will show alot of 38 40 42 44 45 clocks.
Is MSR dumper incorrect and everything is fine? I get the same results with no SSDT, the multibeast SB-42ghz-OC SSDT, and a modifired SSDT for 47ghz. The computer actually geekgenches a little slower with the 47ghz SSDT and runs the same with the 42SSDT or no SSDT(which I thought i needed one?)
I also tried imac 12.2 and same results. 3 Pstates with MSR dumper.
Thanks
I recently installed HS on my Sandybridge 2600k and UD3 motherboard.Its OCed to 4.6, using imac 14.2. Its been running fine but I ran MSR dumper and it says im only getting 16 46 and 47 Pstates. Istats shows the cores cycling through probably a dozen or so clocks between 16 and 47. Under slight load istat will show alot of 38 40 42 44 45 clocks.
Is MSR dumper incorrect and everything is fine? I get the same results with no SSDT, the multibeast SB-42ghz-OC SSDT, and a modifired SSDT for 47ghz. The computer actually geekgenches a little slower with the 47ghz SSDT and runs the same with the 42SSDT or no SSDT(which I thought i needed one?)
I also tried imac 12.2 and same results. 3 Pstates with MSR dumper.
Thanks