Contribute
Register

[Guide] Xiaomi Mi Air 13.3 Skylake-U 2016 (1rst Gen)

Status
Not open for further replies.
Here in the attached file from the Update new folder...
Hope this will help to narrow the issue.
 

Attachments

  • install-log-1605621402.log.zip
    4.6 KB · Views: 52
The installation of BS couldn't finish on my internal SSD?
Your Mac requires to update the firmware?

Before i also had the validation tool is unable to set an active startup disk?

So this BS installation is a mess!
In the config.plist i found some weird strings in device properties; AAPL slot name:
model NVMe SSD controler SM95/PM95?
Don't should i have SATA and Crucial instead?

in MmioWhitelist i get Haswell instead of Skylake???

Please Sakoula provide some more help because i'm still stuck, after so much time spent for nothing...
 
Sakoula you are again abroad on the moon...
;-(
But i need to understand why i cannot upgrade my Catalina SSD to BS since it ended with the validation tool?
This mess drives me mad!

I also read that SATA support broken!?
You need to add AppleAHCIPOrt.kext with ninikernel set to 20.0.0

Also SIP has now gained a new bit, so to properly disable SIP you need to set csr-active-config to FF0F0000

Have you made all these updates in you EFI.8?
I didn't find the AppleAHCIPort.kext in your kext folder?
Since the update BS went messy i guess i have to erase my internal SSD to HFS+ journaled and use the USB Stick to make a fresh instal either?
Please HELP asap...
 
Last edited:
5 days later still STUCK with no help from anybody!
;-(
 
Chill, your life isn’t in line, just wait, he surely has other things to do (I’m stuck too and I’m waiting patiently ;) )
 
Hello TiJack,
Thanx for your contribution:
this will help me to be patient until her majesty Sakoula is shining again bringing some light in our darkness...

I have a question about SATA Support broken?
add Catalina's patched AppleAHCIPort kext with the Mini Kernel set to 20.0.0...

Do you know how to set mini Kernel to 20.0.0?
 
Last edited:
Sakoula still in dead zone...?
 
Chill, your life isn’t in line, just wait, he surely has other things to do (I’m stuck too and I’m waiting patiently ;) )
Hello,

Quite a week later, are you still stuck?

{Error Domain=NSPOSIXErrorDomain Code=17 "File exists"}}}}}}
 

Attachments

  • install-log-1606559055.log.zip
    4.9 KB · Views: 51
Last edited:
Status
Not open for further replies.
Back
Top