Contribute
Register

[Guide] Xiaomi Mi Air 13.3 Skylake-U 2016 (1rst Gen)

Status
Not open for further replies.
sakoula

sakoula

Joined
Apr 5, 2011
Messages
152
Motherboard
Gigabyte Designare Z390
CPU
i7-9700K
Graphics
RX 580
Mobile Phone
  1. iOS
Hackintosh Xiaomi Mi Air 13.3 Skylake-U 2016 for macOS Catalina & Mojave & High Sierra

Hackintosh your XiaoMi Air 13.3 Skylake-U 2016. This is intented to create a fully functional hackintosh for the Xiaomi Mi Notebook Air 13.3'' i5-6200U (Skylake-U 2016).

Important Notes

  • This guide is for the **XiaoMi Air 13.3 Skylake-U 2016**. It will probably work on the **XiaoMi Air 13.3 Kaby Lake-R 2018** models with minor modifications.
  • All files used and detailed readmes are located in github [sakoula/XiaoMi-Air-6200U](https://github.com/sakoula/XiaoMi-Air-6200U/blob/master/Changelog.md)
  • The guide will work for either BIOS A05 or BIOS A06. Bios A09 has NOT been tested
  • Following this guide you can run High Sierra 10.13.6 or any version of Mojave 10.14.x up to 10.14.6, or any version of Catalina 10.5.x up to 10.15.3
  • macOS has been installed on a different disk on the second M.2 port of the laptop. I have no experience of having both Windows and macOS on a single disk. In order to boot to macOS you use F12 upon power on and select the boot device.
  • In order to be able to help you please provide full debug information useing the excellent black-dragon74/OSX-Debug tool.
  • Support and Discussion on this guide can be found at tonymacx86

Please note that this guide will be not possible without all the excellent resources:


1. Known Issues / Work in Progress
  • After Sleep distorted or know audio from Headphones Port *work in progress using ALCPlugFix*
  • No audio output from HDMI port *I am not using it so ignore for now*
  • Shutdown is not working as expected. The on/off button's led stays up and the keyboard light is on when touching it. In order to switch off you have to hold the shutdown key for 4 seconds.
  • Internal Wifi is not working *see Wi-Fi section for alternatives*
  • improve bettery life using a `CPUFriendDataProvider.kext` and `CPUTune.kext`
  • When sleeping by closing LID on wake loosing USB

If you face another problem please open a issue.

2. Hardware Specifications
  • Skylake-U 2016
  • Xiaomi Mi Notebook Air 13.3''
  • Bios vers A06
  • CPU Intel Core i5-6200U / 2.7GHz max / Dual core, 4 threads / 3MB L3 cache
  • GPU: HD Graphics 520
  • GPU: Nvidia GeForce 940MX GPU / 1G GDDR5 RAM, frequency 5GHz
  • Memory: 8192 MB DDR4 2133 MHz, single-channel, firmly fitted
  • Display: 13.3 inch 16:9, 1920 x 1080 pixel 166 PPI, Samsung LTN133HL09-M01, IPS, glossy: yes
  • Samsung PM951 NVMe MZVLV256, 256 GB (on first SLOT which is PCie/NVMe)
  • Samsung 850 Evo Series, 500GB M.2 SSD (MZ-N5E500BW) (on second SLOT which is SATA) (for macOS)
  • WIFI: Intel Dual Band Wireless-AC 2x2 Network / 2.4GHz and 5GHz dual-band WiFi / 802.11ac / 802.11b/g/n / 867Mbps max
  • Bluetooth: Bluetooth 4.1 wireless technology
  • Connectivity: USB Type-C charging port, 2× USB 3.0, 1× HDMI, 3,5 mm audio jack

    3. Upgrade Guide Mojave (10.14.6) to Catalina (10.15.3)

    * Step 1: Delete all hackintosh related kexts from `/Library/Extensions`:

    Code: 
    sudo su -
cd /Library/Extensions
rm -rf AppleALC.kext
rm -rf CPUFriend.kext
rm -rf CPUFriendDataProvider.kext
rm -rf CodecCommander.kext
rm -rf HibernationFixup.kext
rm -rf Lilu.kext
rm -rf LiluFriendLite.kext
rm -rf NullEthernet.kext
rm -rf SATA-unsupported.kext
rm -rf SMCBatteryManager.kext
rm -rf USBPorts.kext
rm -rf VirtualSMC.kext
rm -rf VoodooPS2Controller.kext
rm -rf WhateverGreen.kext
kextcache -i /


    * Step 2: mount the hard disk EFI partition and delete everything but your smbios settings from **config.plist**

    Code: 
    # somehow mount the EFI e.g. with clover configurator e.g. mounted at /Volumes/EFI
cd /Volumes/EFI/EFI/CLOVER
cp config.plist ~/config.plist
cd /Volumes/EFI/
rm -r EFI*

    * Step 3: install clover to the disk

    follow `Install Clover on the macOS disk` and `Customize Clover on the macOS disk` from this guide.

    Important copy your SMBIOS settings from your `~/config.plist` to the installed `/Volumes/ESP/EFI/CLOVER/config.plist`

    * Step 4: upgrade

    Do the upgrade from the `System Preferences > Software Update`

    Once you get on the 10.15.3 you should not do any further steps.

    4. Installation Guide
    These are the steps in order to install or upgrade your XiaoMi-Air. There is a very detailed document on the steps followed and the customizations which can be found in DETAILS.md.

    There is a another document on how I setup my environment including all the tools and utilities I have used ENVIRONMENT.air.md.

    You will need a working macOS installation (no matter the version) to create a USB Flash Drive with macOS.

    Start by downloading the latest version the customization files from the releases page. It includes:
    • `AIR_EFI/`: efi directory including all kexts and customization needed
    • `addons/LiluFriendLite.kext`: `LiluFriendLite.kext` used in the installation
    • `addons/ApfsDriverLoader.efi`: `ApfsDriverLoader.efi` used in the installation
    • `addons/AudioDxe.efi`: `AudioDxe.efi` used in the installation
    • `addons/EmuVariableUefi.efi`: `EmuVariableUefi.efi` Emulated NVRAM
    • `addons/FwRuntimeServices.efi`: `FwRuntimeServices.efi` required from OcQuirks*
    • `addons/HFSPlus.efi`: `HFSPlus.efi` used in the installation
    • `addons/OcQuirks.efi`: `OcQuirks.efi` instead of OsxAptio*
    • `addons/OcQuirks.plist`: `OcQuirks.plist` instead of OsxAptio*
    • `addons/UsbKbDxe.efi`: `UsbKbDxe.efi` used in the installation
    • `addons/UsbMouseDxe.efi`: `UsbMouseDxe.efi` used in the installation
    • `addons/VirtualSmc.efi`: `VirtualSmc.efi` used in the installation
    • `addons/AppleGenericInput.efi`: `AppleGenericInput.efi` FileVault
    • `addons/AppleUiSupport.efi`: `AppleUiSupport.efi` FileVault

    4.1 Installation SSD
    I installed a Samsung 850 Evo Series, 500GB M.2 SSD (MZ-N5E500BW) specifically for macOS on the second M.2 port. Use F12 to boot from a specific device.

    4.2 Disable Secure Boot
    Hold F2 to get into the BIOS. In order to disable the secure boot you need to set a supervisor BIOS password. Use root as a password. Without exiting disable the secure boot. Then change the supervisor password and do not enter a new one. This will disable it. Exit BIOS saving the options.

    You do not have to change anything else from the defaults

    4.3 Preparing USB Flash Drive
    Get a at least 16GB USB Flash Drive and:

    Disk Utility > Select USB Device > Erase:
    • GUID Partition Table
    • Name: USB
    • Format: MacOS Extended (Journaled)

    4.4 Install Cataline installer to the USB Flash Drive
    Download Cataline from Apple AppStore and run the following command to install it on the USB disk you just Erased.
    $ sudo /Applications/Install macOS Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/USB

    4.5 Install Clover to the USB Flash Drive
    Go with the stock clover and run `Clover_v2.5k_r5099` installer:

    *Continue* > *Continue* > *Change Install Location* > *Install macOS Catalina* > *Customize*

    *Clover for UEFI booting only*, *Install Clover in the ESP*

    4.6 Customize Clover on the USB Flash Drive
    Download the latest release from github and unzip the archive. You will find an AIR_EFI directory and a addons directory. Mount the USB Flash Drive's EFI partition on /Volumes/EFI:
    • create `EFI/CLOVER/drivers/UEFI` or erase everything in `EFI/CLOVER/drivers/UEFI` if it exists
    • copy `AIR_EFI/CLOVER/kexts/Other` from the downloaded file to USB's EFI to `EFI/CLOVER/kexts/Other`
    • copy `addons/*.efi` and `addons/*.plist` from the downloaded file to USB's EFI to `EFI/CLOVER/drivers/UEFI/`
    • copy `AIR_EFI/CLOVER/ACPI/PATCHED/*` from the downloaded file to USB's EFI to `EFI/CLOVER/ACPI/PATCHED/*`
    • copy `AIR_EFI/CLOVER/config.plist` from the downloaded file to USB's EFI to `EFI/CLOVER/config.plist`

    4.7 Install Catalina
    To boot from the USB Flash Drive you can just hit F12 and you will get the UEFI boot loader

    Boot from the USB and install Catalina on the hard disk.

    If your Xiaomi-Air already runs High Sierra 10.14.6 you can upgrade directly to Catalina using the installer from the AppleStore (no need of a USB Flash Drive).

    Important: During installation you will ask to reboot the machine. While on clover make sure to boot from Boot macOS install from *** disk disk. If you do not see this disk hit F3 to show all the hidden disks. You may need to reboot multiple times.
    Click to expand...

    4.8 Install Clover on the macOS disk
    Once the installation is over you will need to install Clover bootloader on the hard disk that you have installed macOS in order to be able to boot without the USB Flash Drive.

    Run again the Clover_v2.5k_r5099 installer:

    *Continue* > *Continue* > *Change Install Location* > *macOS location* > *Customize*

    *Clover for UEFI booting only*, *Install Clover in the ESP*

    *Install RC scripts on target volume*

    *Install Clover Preference Pane*

    4.9 Customize Clover on the macOS disk
    Download the latest release from github and unzip the archive. You will find an AIR_EFI directory and a addons directory.

    > **Important**: Before installing clover on disk make sure that you do `sudo mount -uw /` from the terminal. And ignore any message from clover saying that it is incompatible with your operating system

    Mount the EFI partition of the macOS boot parition on /Volumes/EFI:
    • create `EFI/CLOVER/drivers/UEFI` or erase everything in `EFI/CLOVER/drivers/UEFI` if it exists
    • copy `AIR_EFI/CLOVER/kexts/Other` from the downloaded file to USB's EFI to `EFI/CLOVER/kexts/Other`
    • copy `addons/*.efi` and `addons/*.plist` from the downloaded file to USB's EFI to `EFI/CLOVER/drivers/UEFI/`
    • copy `AIR_EFI/CLOVER/ACPI/PATCHED/*` from the downloaded file to USB's EFI to `EFI/CLOVER/ACPI/PATCHED/*`
    • copy `AIR_EFI/CLOVER/config.plist` from the downloaded file to USB's EFI to `EFI/CLOVER/config.plist`

    4.10 Move kexts to /Library/Extensions
    February 2020 Starting with Catalina I do not do this step!

    The right way to load kexts is not by injecting them through clover but installing them in /Library/Extensions and building them into the kernel cache.

    Download the latest release from github and unzip the archive. You will find an AIR_EFI directory and a addons directory.

    Mount the EFI partition of the macOS boot parition on /Volumes/EFI:
    • move EFI/CLOVER/kexts/Other/* from macOS boot parition to /Library/Extensions/*
    • run from the console $ sudo chown -R root:wheel /Library/Extensions/*
    • run from the console $ sudo chmod -r 755 /Library/Extensions/*
    • run from the console $ sudo kextcache -i / to rebuild the caches
    • move addons/LiluFriendLite.kext from the downloaded file to /Library/Extensions/LiluFriendLite.kext
    • run from the console $ sudo chown -R root:wheel /Library/Extensions/*
    • run from the console $ sudo chmod -r 755 /Library/Extensions/*
    • run from the console $ sudo kextcache -i / to rebuild the caches
    remember that kextcache needs to be run twice

    4.11 Create a USB Flash Drive just with Clover for emergencies
    Get a small (2GB will work just fine) USB Flash Drive and:

    Disk Utility > Select USB Device > Erase:
    • GUID Partition Table
    • Name: CLOVER
    • Format: MS-DOS-FAT
    Run the Clover_v2.5k_r5099 installer:

    *Continue* > *Continue* > *Change Install Location* > *USB Flash Drive* > *Customize*

    *Clover for UEFI booting only*, *Install Clover in the ESP*

    Download the latest release from github and unzip the archive. You will find an AIR_EFI directory and a addons directory. Mount the USB Flash Drive's EFI partition on /Volumes/EFI:
    • create `EFI/CLOVER/drivers/UEFI` or erase everything in `EFI/CLOVER/drivers/UEFI` if it exists
    • copy `AIR_EFI/CLOVER/kexts/Other` from the downloaded file to USB's EFI to `EFI/CLOVER/kexts/Other`
    • copy `addons/*.efi` and `addons/*.plist` from the downloaded file to USB's EFI to `EFI/CLOVER/drivers/UEFI/`
    • copy `AIR_EFI/CLOVER/ACPI/PATCHED/*` from the downloaded file to USB's EFI to `EFI/CLOVER/ACPI/PATCHED/*`
    • copy `AIR_EFI/CLOVER/config.plist` from the downloaded file to USB's EFI to `EFI/CLOVER/config.plist`
    • edit `config.plist` change the `SystemParameters`:

    XML: 
    <dict>
  <key>InjectKexts</key>
  <string>Detect</string>
  <key>InjectSystemID</key>
  <true/>
</dict>

    5. Postinstallation Steps

    5.1 Enable HiDPI resolutions
    I am using the computer using the *1600x900* resolution that fits my eyes best.

    You can enable HiDPI resolutions using the amazing script [one-key-hidpi](https://github.com/xzhih/one-key-hidpi). However since native max resolution of the LCD is *1920x1080* it **does not make any sense**. HiDPI will look huge on screen and the *1920x1080* HiDPI will not seem any different and will make the computer slower. *1920x1080* HiDPI will create a *3840x2160* virtual screen that will map it to a *1920x1080* display, so it does not help much.

    If you still want to use HiDPI get the avibrazil/RDM [avibrazil/RDM](https://github.com/avibrazil/RDM) tool if you cannot see all the available resolutions.

    5.2 Install ALCPlugFix

    Install ALCPlugFix is work in progress to solve the wake up with headphones problem

    5.3 create a valid SMBIOS
    create a valid SMBIOS. Follow the guide An iDiot's Guide To iMessage

    6. Patching Information
    Patching has been done using clover and hotpatching ACPI. All the required files exist in the AIR_EFI directory:
    • CLOVER/config.plist clover configuration file
    • CLOVER/ACPI/origin BIOS A06 ACPI aml files (from CLOVER with F4)
    • CLOVER/ACPI/patched ACPI hotpaches
    • CLOVER/kexts/Other kexts required

    The SMBIOS used is MacBookPro13,1

    6.1 CPU
    • The model is i5-6200U, and XCPM power management is native supported.
    • HWP is supported as well through a custom CPUFriendDataProvider.kext work in progress

    kext patches in /CLOVER/kexts/Other applied:
    • `Lilu.kext` Arbitrary kext and process patching on macOS
    • `HibernationFixup.kext` Lilu plugin intended to fix hibernation compatibility issues
    • `NullEthernet.kext` Null Ethernet Network Driver by RehabMan
    • `CPUFriend.kext` Dynamic macOS CPU power management data injection
    • `CPUFriendDataProvider.kext` custom CPU power management provider for i5-6200U
    • ~~`ACPIBatteryManager.kext` Advanced Configuration and Power Interface (ACPI) based battery manager kernel extension~~ updated 20190801 [VirtualSMC+SMCBatteryManager is recommended](https://github.com/daliansky/XiaoMi-Pro-Hackintosh/pull/204)
    • `VirtualSMC.kext` SMC emulator layer
    • `SMCBatteryManager.kext` SMC emulator layer use this instead of ACPIBatteryManager.kext
    • `SMCProcessor.kext` Virtual SMC plugin
    • `SMCSuperIO.kext` Virtual SMC plugin
    • `SATA-unsupported.kext` SATA unsupported

    ACPI patches in /CLOVER/ACPI/patched applied:
    • `SSDT-DMAC.aml` Add missing DMAC Device to enhace performance like a real Mac
    • `SSDT-HPET.aml` Disable HPET device by passing value 0 to HPTE to to behave more like a real Mac
    • `SSDT-MEM2.aml` Add missing MEM2 Device to enhace performance like a real Mac
    • `SSDT-PMCR.aml` Add missing PMCR Device to enhace performance like a real Mac
    • `SSDT-GPRW.aml` For solving instant wake by hooking GPRW
    • ~~`SSDT-PNLF.aml` Adding PNLF device for BackLight related~~ updated 20190801 Remove SSDT-PNLF and replace with AddPNLF argument as suggested in [WhateverGreen FAQ](https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md#adjusting-the-brightness-on-a-laptop)
    • `SSDT-RMCF.aml` Configuration data for other SSDTs(SSDT-GPRW and SSDT-PTSWAK)
    • `SSDT-LPC.aml` To fix unsupported 8-series LPC devices (0x9d48).
    • `SSDT-PTSWAK.aml` fixing sleep _PTS and _WAK
    • `SSDT-SMBUS.aml` add BUS0 device
    • `SSDT-PXSX.aml` Cosmetic Strings for Xiaomi Mi Notebook Air 13.3
    • `SSDT-XOSI.aml` Override for host defined _OSI to handle "Darwin"

    6.2 Audio
    • Sound card is Realtek ALC255 which is drived by AppleALC on layout-id 30 or 99. I have noticed that on layout-id 30 internal microphone and heaphones microphone is too low so I switched back to layout-id 99.

    kext patches in /CLOVER/kexts/Other applied:
  • AppleALC.kext Native macOS HD audio for not officially supported codecs
  • CodecCommander.kext For waking up EAPD amp after sleep on OS X hackintosh

config.plist patch applied:
  • Patch Devices > PciRoot(0x0)/Pci(0x1f,0x3)

6.3 Bluetooth
The card in the laptop is Intel® Dual Band Wireless-AC 8260
  • Bluetooth works if using a VM to inject the FW or use injectors
  • `IntelBluetoothFirmware.kext`
  • `IntelBluetoothInjector.kext`

6.4 Ethernet
  • Xiaomi-Air does not have an Ethernet. A USB one can be used and supported natively such as the TP-LINK UE300

6.5 Graphics
  • Discrete card is Nvidia GeForce 940MX, disabled by SSDT-DDGPU.aml because macOS doesn't support Optimus technology.
  • Supported card is Intel HD Graphics 520 supported with edits in config.plist

kext patches in /CLOVER/kexts/Other applied:
  • WhateverGreen.kext Various patches necessary for certain ATI/AMD/Intel/Nvidia GPUs

ACPI patches in /CLOVER/ACPI/patched applied:
  • SSDT-BCKS.aml Native brightness hotkey support

config.plist patch applied:
  • Patch Devices > PciRoot(0x0)/Pci(0x2,0x0)

6.6 Keyboard
kext patches in /CLOVER/kexts/Other applied:
  • VoodooPS2Controller.kext RehabMan and now Acidanthera work on keyboard
  • VoodooInput.kext VoodooPS2Controller is now two kexts

6.7 Touchpad
kext patches in /CLOVER/kexts/Other applied:
  • VoodooPS2Controller.kext RehabMan and now Acidanthera work on keyboard
  • VoodooInput.kext VoodooPS2Controller is now two kexts

6.8 USB
  • USB Port Patching uses Intel FB-Patcher, related file is located in /CLOVER/kexts/Other/USBPorts.kext. This patch includes power injection as well (remove `SSDT-USBX.aml`)
kext patches in /CLOVER/kexts/Other applied:
  • USBPorts.kext through HackingTool

> 2090801 It seems that HS02 and SS02 is not used. I thought initially that the Type-C used different ports according to how you plug the cable. So they are redundant in the kext. However they do not make any harm so I left them in

* `USBPorts.kext` through HackingTool

6.9 Wi-Fi
The card in the laptop is Intel® Dual Band Wireless-AC 8260
  • Wifi is not working. Get a USB card such as TP-LINK TL-WN725N v3 and download drivers from the TP-LINK site or Archer T3U and download drivers from the TP-LINK site

7. Changelog
You can view Changelog.md for detailed information.

8. Benchmarking

8.1 Benchmarking Windows 10
  • GeekBench x64 4.0.3 CPU 2550/5551
  • CINEBENCH R15.038_RC184115 OpenGL 56.92fps (NVIDIA)
  • CINEBENCH R15.038_RC184115 OpenGL 36.45fps (Intel)
  • CINEBENCH R15.038_RC184115 CPU 295cb
  • LuxMark-v3.1 OpenCL GPU 3710 (Intel + NVIDIA)
  • LuxMark-v3.1 OpenCL GPU 1427 (Intel)
  • LuxMark-v3.1 OpenCL GPU 2354 (NVIDIA)
  • LuxMark-v3.1 OpenCL CPU 860
  • Heaven FPS 20.3 Score 512 Min FPS 7.8 Max FPS 40.4 (NVIDIA)
  • Heaven FPS 9.1 Score 230 Min FPS 5.5 Max FPS 20.1 (Intel)

8.2 Benchmarking macOS 10.14.2
  • GeekBench x64 4.3.2 CPU 3470/6695
  • GeekBench x64 4.3.2 GPU/OpenCl 16465
  • GeekBench x64 4.3.2 GPU/Metal 16748
  • CINEBENCH R15.038_RC184115 OpenGL 22.92fps
  • CINEBENCH R15.038_RC184115 CPU 293cb
  • LuxMark-v3.1 OpenCL GPU 1381
  • LuxMark-v3.1 OpenCL CPU 776
  • Heaven FPS 13.8 Score 349 Min FPS 6.2 Max FPS 25.3
  • AJA System Test Lite (with trim) Samsung SSD 850 EVO M.2 500GB: 469MB/sec write, 489MB/sec read

9. Credits
 
Last edited:
thanks Xerz will do!!!!
 
Hi guys,

Thanks for your guide. I successfully installed HS on my mi notebook air 13.3 i5-6200U. I don't necessarily want to OC just get better battery life/power consumption and I am seriously confused by the methods floating around. I get around 2.5hrs on battery.

I get that XCPM power management is native for this CPU which is ok but not great battery life. Where to go now? HWPEnabler method as found here with CPUFriendDataProvider.kext, is there progress? I get that either use either XCPM or disable it and only use HWP.

I found here for HWPEnable: https://www.insanelymac.com/forum/t...l-speed-shift-on-skylake-and-up-enabler-kext/ or https://www.tonymacx86.com/threads/skylake-hwp-enable.214915/

Any easier options (don't want to break my installation just yet) or a step by step guide for beginner level? LOL



about.png
 
Last edited:
Hi @mongo99 ,

I get similar battery life. My understanding is that your best bet is to create a custom CPUFriendDataProvider .

1. In my guide I have used the one I found in the original port from JahStories on another forum which I converted it in the format of CPUFriend.
2. See this post on how to create one. And this post on an optimized one. I know they are from the Pro model but it is the closest I have found to a guide.
3. Check this freqVectosEdits on the subject as well
4. finally check syscl/CPUTune

I am working on it as well (on my little spare time). When I have something I will update the guide.
 
Hi added a new release with some changes:


In case someone is interested. @mongo99 I played a bit with the CPUFriendDataProvider. I think this is the best the laptop can achieve battery wise.
 
sakoula said:
Hi @mongo99 ,

I get similar battery life. My understanding is that your best bet is to create a custom CPUFriendDataProvider .

1. In my guide I have used the one I found in the original port from JahStories on another forum which I converted it in the format of CPUFriend.
2. See this post on how to create one. And this post on an optimized one. I know they are from the Pro model but it is the closest I have found to a guide.
3. Check this freqVectosEdits on the subject as well
4. finally check syscl/CPUTune

I am working on it as well (on my little spare time). When I have something I will update the guide.
Click to expand...
Thanks sakoula for this, will try. Looking forward to the updates.
 
sakoula said:
Hi added a new release with some changes:


In case someone is interested. @mongo99 I played a bit with the CPUFriendDataProvider. I think this is the best the laptop can achieve battery wise.
Click to expand...
Thanks for your efforts :)
 
Hello Sakoula,

I was unfortunately unable to upgrade successfully from High Sierra to Mojave because ending with a bootloop...
So i used your nice guide setup and had success!
But No sound available? and some kext rejected?
Kext rejected due to improper filesystem permissions?

Should you kindly find what have messed i will be happy?
 

Attachments

  • debug_4576.zip
    1.3 MB · Views: 239
Hello Sakoula,

I found some mispelling in your guide setup: see my corrections shown in RED
Mount the EFI partition of the macOS boot parition on /Volumes/EFI:

  1. move EFI/CLOVER/kexts/Other/* from macOS boot partition to /System/Library/Extensions/*
  2. run from the console $ sudo chown -R root:wheel /System/Library/Extensions/*
  3. run from the console $ sudo chmod -R 755 /System/Library/Extentions/*
  4. run from the console $ sudo kextcache -i / to rebuild the caches
  5. move addons/LiluFriendLite.kext from the downloaded file to /Library/Extensions/LiluFriendLite.kext
  6. run from the console $ sudo chown -R root:wheel /System/Library/Extensions/*
  7. run from the console $ sudo chmod -R755 /System/Library/Extentions/*
  8. run from the console $ sudo kextcache -i / to rebuild the caches
remember that kextcache needs to be run twice

Do you have any idea how to correct Kext rejected due to improper filesystem permissions?

Regards
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top