shilohh
Moderator
- Joined
- Jan 1, 2012
- Messages
- 1,752
- Motherboard
- Asus Prime Z490-A
- CPU
- i9-10850K
- Graphics
- RX 5700 XT
- Mac
- Mobile Phone
Guide: Asus X79 OS X Controlled SpeedStep
Clover does work correctly but you have to disable all ssdt auto patch features and do not drop oem. Post your config.plist and I'll try to fix it. Also your SSDT must be placed in the ACPI patched folder. Clover is pretty wonky because even after disabling all the auto patch features, it still does things behind your back. I just ran into an issue where I can't boot unless I have the exact monitor plugged into the exact port as when I installed. To me this is another fatal flaw of clover. I'm dropping clover.shilohh I followed the steps in my system, ( 3930K + rampage iv formula bios 4804), seems to work but the multiplier goes crazy up and down constantly and work more down is 2.52 ghz, I may have wrong?
Only in bios activate c states c1E c3 c6 EIST= disabled and turbo on.
I have clover , is the problem clover ?
thanks in advance.