[GUIDE/Workaround] Using Intel HD530 with Dual Monitors

[Anatharias]

I got 3 displays working on a Dell 3040 HD530 2xDP, 1xHDMI - Mojave 10.14.2
hot plug works, no need to turn on or off, no black blinking

no sleep though - can't care less

attached plist has re-generated serial number

 

[davidKim]

Hi
I can not find the AppleIntelFrambuffer@1 and where do i modify port0x0, port0x5...
Two monitors are mirrored now.

Skylake : Gigabite H310M-DS2V | i3-8100 | Intel HD630

 

[Feartech]

Hi
I can not find the AppleIntelFrambuffer@1 and where do i modify port0x0, port0x5...
Two monitors are mirrored now.

Skylake : Gigabite H310M-DS2V | i3-8100 | Intel HD630

use this:
Hackintool:

[Release] Hackintool v3.x.x

HACKINTOOL The Swiss army knife of vanilla Hackintoshing WARNING! Hackintool is not an automated patching tool that does all the work for you. Knowledge is required on how to patch before using it. Please read the Intel Framebuffer patching using WhateverGreen guide before you download this...

www.tonymacx86.com

 

[ekrako]

I can't get it to work on my machine.
if I config my ig-platform-id to 0x193B0005 my graphics card acceleration works but only single monitor
but if I config ig-platform-id to 0x19120000 my graphics card acceleration doesn't work but dual monitor works
attach config.plist file.
Please help

 

[enzo0508]

I can't get it to work on my machine.
if I config my ig-platform-id to 0x193B0005 my graphics card acceleration works but only single monitor
but if I config ig-platform-id to 0x19120000 my graphics card acceleration doesn't work but dual monitor works
attach config.plist file.
Please help

1. ig-platform-id: 0x19120000
2. Before turn on plug only DVI Monitor (It is very important)
3. After logged in plug HDMI Monitor. HDMI Monitor is working, DVI monitor isn't working (it is normal)
4. In SwitchResX change resolution of DVI monitor (for example 800х600)
5. Wait 1 seconds (or more)
6. Change resolution DVI Monitor to normal (for example 1600х900)
7. Profit! You have got two monitors!

 

[enzo0508]

deleted

 

[ekrako]

1. ig-platform-id: 0x19120000
2. Before turn on plug only DVI Monitor (It is very important)
3. After logged in plug HDMI Monitor. HDMI Monitor is working, DVI monitor isn't working (it is normal)
4. In SwitchResX change resolution of DVI monitor (for example 800х600)
5. Wait 1 seconds (or more)
6. Change resolution DVI Monitor to normal (for example 1600х900)
7. Profit! You have got two monitors!
View attachment 412108
View attachment 412107

thanks for the fast reply.
I've tried some changes now the status that my dvi doesn't work at all, bot when I boot with it connect with other monitor and without it.
when booting with HDMI monitor and then connecting DVI monitor the system crashes.
I've attached my current config.plist and ioreg dumb

 

[ekrako]

Thanks for everyone, for the detailed thread I've been able to make it work with attached config.plist
Is there a way to make it work automatically after boot without disconnecting one of the monitors?

 

[Feartech]

Thanks for everyone, for the detailed thread I've been able to make it work with attached config.plist
Is there a way to make it work automatically after boot without disconnecting one of the monitors?

As per rules, please update your hardware profile to allow others to help you easier

https://www.tonymacx86.com/account/account-details

 

[ekrako]

As per rules, please update your hardware profile to allow others to help you easier

https://www.tonymacx86.com/account/account-details

Done