RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,058
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
Even after i remove “...” then
The only error remains 6126 syntax error “unexpected $end and premature End-of-file” in line 28
You would need the appropriate number of close braces.
You might want to learn a bit about ACPI before attempting to write AML code.
I tried imac 14.1 also, but no good..
iMac14,1 is also Haswell... (much newer than your hardware).
Is there anything close to my specs u can suggest..??
You should refer to everymac.com.
I suspect the problem of usb power coz
Unlikely... such problems with power usually manifest at the time of USB device insertion.
So acc to me when gt710 on pcie needs power to render graphics
The usb not having adequate power fluctuates..
May be hardware issue (inadequate power supply?)
Test same on Windows.
So should i go through ssdt-uiac or AppleLpc( if applelpc then please giude me through how to do it)
AppleLPC is important. And off-topic here. Search for solutions with search/google.