- Jun 6, 2013
- HP Elitebook 8460p (Clover)
- AMD-ATI Radeon HD6470M, 1600x900
- Classic Mac
- Mobile Phone
Looks like a normal boot. Be patient. Booting the installer from USB is not quick.
It might be a bit faster if you had bluetooth kexts in Clover/kexts... (assuming you have a supported BT device installed).
Your profile lacks hardware details, so no idea if you chose the correct config.plist.
I had the hardware details in my signature, sorry if it was not visible. Attached is CPU-Z report for additional hardware details. I do not have a BT device installed.
HP Probook 450 G2, i5-4210U 1.70 GHz, Intel HD 4400 (1366x768), Haswell, Atheros 9285, 8-Series motherboard
I waited for over 30 minutes at times ... still nothing besides the spinning wheel.
- Ok did all the process again. config.plist corresponds to "HD3000 1600x900+ blackscreen" file.
- sending new EFI folder and verbose screen
Thanks for your help.
I'm not sure what happens when you use a FakeID with 16 hex digits. It is a 32-bit value and hence limited to 8 hex digits.
Also, your first image seems to indicate the serial port is enabled, which I'm pretty sure is mentioned in the guide as it should be disabled.
- fixed to 8 digits
- Serial port disabled
and another detail the first elitebook model didn´t had a MDC card. This Elitebook does.
Might this device affect boot?
No idea. Remove it to find out.