- Joined
- Mar 2, 2012
- Messages
- 46
- Motherboard
- Mavericks/Yosemite
- CPU
- 4300m
- Graphics
- HD4600
- Mac
- Classic Mac
- Mobile Phone
Boot verbose, show photo.
this
Boot verbose, show photo.
this
Seems like you forgot to disable the serial port as recommended in the guide.
sorry, did not see that! i have disabled it now but get stuck on the same point...
Boot verbose show photo.
well, finnally got it working, works great! i think it was a bios setting problem
i only have one issue now, i have cloned the system to another ssd because we have 2 6470b laptops
the 2nd laptop (cloned) works great as expected but it seems that takes like 30 seconds to start booting up, i mean, clover boots normally, then apple logo appears and it hangs for 20-30 sec and then starts reading the ssd and boots
in verbose mode it hangs at IOAPIC version 0x20
thank you
Looks like I have one more hurdle after my recent motherboard swap. The problem is that, when booting into Mavericks, it hangs / freezes at the Apple Logo about half the time.
I can tell that it's going to happen because the screen stays on full brightness, opposed to going to the most recent dim-ness that I like to keep it at.
The apple logo and grey screen come up as normal, the little progress circle thing spins for 1 minute, and then it just stops spinning and I do a hard-reset. Strange that it just happens sometimes, like as if it flips a coin to decide.
Since swapping Mobo, I have updated drivers and Bios on Windows, reconfigured Bios settings, and updated Clover.