Contribute
Register

[Guide] Sierra 10.12.2 on the AsRock Z170 Pro4

Joined
Sep 12, 2017
Messages
8
Motherboard
Asrock H-170 Performance Fatal1ty
CPU
i5 6600
Graphics
Intel 530
Mobile Phone
iOS
IMG_0294.JPG
Try again with different USB port in main board. Also, check your bios and make sure you have XHCI Handoff enabled.
Ugh Im about ready to give up on this whole thing. Wish I could find someone near me that could come build this for me. Anyway here's my last error
 
Joined
May 15, 2016
Messages
4,082
Motherboard
GIGABYTE Z170M D3H
CPU
i5-6500
Graphics
RX 480
Mac
iMac
View attachment 280094

Ugh Im about ready to give up on this whole thing. Wish I could find someone near me that could come build this for me. Anyway here's my last error
Did you change USB ports, the local host error is gone? Clover boot manager "Binaries" use cpuid 0x0506E3, and uncheck the lower CPU options except appleRTC option.
 
Joined
Sep 12, 2017
Messages
8
Motherboard
Asrock H-170 Performance Fatal1ty
CPU
i5 6600
Graphics
Intel 530
Mobile Phone
iOS
Did you change USB ports, the local host error is gone? Clover boot manager "Binaries" use cpuid 0x0506E3, and uncheck the lower CPU options except appleRTC option.
I changed ports and unplugged anything that was plugged into other USB ports. Ill give this a shot. Don't know anyone in the Chicagoland area that can come and install this by chance?
 
Joined
May 15, 2016
Messages
4,082
Motherboard
GIGABYTE Z170M D3H
CPU
i5-6500
Graphics
RX 480
Mac
iMac
I changed ports and unplugged anything that was plugged into other USB ports. Ill give this a shot. Don't know anyone in the Chicagoland area that can come and install this by chance?
No, I'm out west. If you keep at it you'll get it.
 
Joined
Sep 12, 2017
Messages
8
Motherboard
Asrock H-170 Performance Fatal1ty
CPU
i5 6600
Graphics
Intel 530
Mobile Phone
iOS
Try again with different USB port in main board. Also, check your bios and make sure you have XHCI Handoff enabled.
Im getting the same issues as with post #61. I disconnected all the USB ports on my mojo and am using the USB 2.0 on the rear. I do have XHCI handoff enabled in my BIOS

I'm sorry I suck at this and keep bothering you
 
Last edited:
Joined
Sep 12, 2017
Messages
8
Motherboard
Asrock H-170 Performance Fatal1ty
CPU
i5 6600
Graphics
Intel 530
Mobile Phone
iOS
Im getting the same issues as with post #61. I disconnected all the USB ports on my mojo and am using the USB 2.0 on the rear. I do have XHCI handoff enabled in my BIOS

I'm sorry I suck at this and keep bothering you
So I remade my USB boot drive from scratch with the most current Unibeast and MultiBeast from this site. Set my BIOS to exactly as stated in the guide but I don't have the option for "other OS". I have unplugged everything from my MOBO except the SSD. I don't have any graphics cards and am just using the integrated GPU 530. It still keeps crashing at the same point as in post #61. If this keeps up I think my next step is to insert my system into a wood chipper.
 
Joined
Apr 29, 2018
Messages
1
Motherboard
ASRock Z170M Pro4S
CPU
i3-6100
Graphics
HD7870
This thread is a little old but its the only one I can find for my MB...
I have spent many hours on this effort now, trying different options, USB slots, etc and I continue to get the same results: a hang "IOTimeSyncClockManager::interface matched registered service", then the stop sign with screen corruption during the install step.

I don't really understand how this all works so I'm out of ideas for things to try.

the verbose log isn't very helpful. Interweb posts imply that I am having a USB problem but I don't see any text on screen that mentions USB. I'm not sure how I could be getting this far into the process unless the USB was working since it got to the Clover loader and started the install.

BIOS is 7.30
Ive tried 10.12 and 10.13 with the appropriate Unibeast versions.
 

Attachments

Joined
May 15, 2016
Messages
4,082
Motherboard
GIGABYTE Z170M D3H
CPU
i5-6500
Graphics
RX 480
Mac
iMac
This thread is a little old but its the only one I can find for my MB...
I have spent many hours on this effort now, trying different options, USB slots, etc and I continue to get the same results: a hang "IOTimeSyncClockManager::interface matched registered service", then the stop sign with screen corruption during the install step.

I don't really understand how this all works so I'm out of ideas for things to try.

the verbose log isn't very helpful. Interweb posts imply that I am having a USB problem but I don't see any text on screen that mentions USB. I'm not sure how I could be getting this far into the process unless the USB was working since it got to the Clover loader and started the install.

BIOS is 7.30
Ive tried 10.12 and 10.13 with the appropriate Unibeast versions.
Have you disabled serial ports in bios? It may be listed in SuperIO configuration.
 
Top