Contribute
Register

[Guide] Razer Blade 15 (2018) Detailed Install Guide High Sierra 10.13.6 (17G2208-17G5019)

Status
Not open for further replies.
Anyone who uses Broadcom wifi adapter, which way you have those wires connected?
 
Hi, Thanks for the nice guide. Is the usually has errors when I compile the DSDT? I have 201errors already before I do patch it.
 
Hi, Thanks for the nice guide. Is the usually has errors when I compile the DSDT? I have 201errors already before I do patch it.
errors or warnings?
 
Hi, Thanks for the nice guide. Is the usually has errors when I compile the DSDT? I have 201errors already before I do patch it.
If warnings it's ok.
If errors that's not ideal. I had such case when copied ACPI stuff from ACPI/patched directory via Finder to my Desktop and then doing disassembly with iasl. So I always do the disassembly at that ACPI/patched folder now to avoid errors.
 
Does anyone know if it would work for a Razer blade pro? And do I have to use a SSD or can I use a hard drive. If so can I just make a partition and do everything from there?
 
Last edited:
Hi, guys. I’ve needed to format my ssd. So now I have a problem with an installation, I do all by instruction. But when I’m booting from USB installer, loading screen freezing at this:
 

Attachments

  • AE7D664D-8BEA-400F-95BF-CB91B58346C6.jpeg
    AE7D664D-8BEA-400F-95BF-CB91B58346C6.jpeg
    3.3 MB · Views: 115
This is my GFX BIOS screen
 

Attachments

  • 93E97C4A-23DD-43CB-A07B-9CB2F273D1AE.jpeg
    93E97C4A-23DD-43CB-A07B-9CB2F273D1AE.jpeg
    3.9 MB · Views: 126
So. I've installed MacOS) But one problem - when I applied DSDT patch for trackpad, but there is no result. I used a lot of kexts- included in post installation folder, newest and from 11 January - one result. I’ve put them in Other folder in EFI-Clover
 
Last edited:
So. I've installed MacOS) But one problem - when I applied DSDT patch for trackpad, but there is no result. I used a lot of kexts- included in post installation folder, newest and from 11 January - one result. I’ve put them in Other folder in EFI-Clover
Need problem reporting files to be posted to give you any real help.
 
errors or warnings?
Oh
I reinstalled with clean kexts and I found only for errors and fixed all.

But I guess this whiskey lake's UHD 620 is not supported by customer yet.
Only 7mb I see always with every possibilities injecting IDs
 
Status
Not open for further replies.
Back
Top