[Guide] Patching LAPTOP DSDT/SSDTs

[Feartech]

What card can I replace it with? What parameter to pay attention to when buying so that the card works? thanks!

you want to replace the nvidia card in your laptop?

 

[stas-ok]

you want to replace the nvidia card in your laptop?

No, add egpu (exp gdc + gtx1050) + my laptop Lenovo v580c.

 

[Feartech]

No, add egpu (exp gdc + gtx1050) + mu laptop Lenovo v580c.

no

 

[stas-ok]

no

Which card should I replace my card (gtx1050) with in order for this to work?

 

[realbabilu]

Dear Feartech
Could you help me disable DGPU cleanly via DSDT on msi g9-rcx?

Solved > - Msi GF63 9RCX Problem HotPatch GPRW PARSEOP_integer error DSDT result

Hi Everyone Lately I reinstall the Mojave on this computer. very light thin fast but cheap https://www.msi.com/Laptop/GF63-Thin-9RCX/Specification its i7-9750H CannonLake 300 with Intel I2C, Intel XHC, Realtek8111 Net, IntelAC Wifi. All working great. Sleep, Shutdown, wake, Brightness, KeyFN...

www.tonymacx86.com

 

[mcNicola]

Hi, I'm a beginner, prepared my first pc and all is ok except the battery
I downloaded DSDT with Clover (F4) and disassembled with iasl, before modifying it with a patch I tried to compile with MaciASL and I found some errors
many has been fixed but now I'm stuck on this piece of code and don't know how to change it:

If (LEqual (GESF, 0x15))
{
If (LEqual (PARM, 0x01))
{
Or (\_SB.PCI0.AUDE, 0x20, \_SB.PCI0.AUDE)
\_SB.PCI0.B0D3.ABWA (0x01)
\_SB.PCI0.B0D3.ARST (\_SB.PCI0.B0D3.ASTR (\_SB.PCI0.B0D3.AINI (\_SB.PCI0.B0D3.CXDC (\_SB.PCI0.B0D3.ABWA (0x00)
Notify (\_SB.PCI0, 0x00) // Bus Check)
If (LEqual (PARM, 0x00))
{
And (\_SB.PCI0.AUDE, 0xDF, \_SB.PCI0.AUDE)
Notify (\_SB.PCI0, 0x00) // Bus Check
}
Store (Zero, GESF) /* \_SB_.PCI0.GFX0.GESF */
)
Store (Zero, PARM) /* \_SB_.PCI0.GFX0.PARM */
Return (SUCC) /* \_SB_.PCI0.GFX0.SUCC */
Store (Zero, GESF) /* \_SB_.PCI0.GFX0.GESF */
)
Return (SUCC) /* \_SB_.PCI0.GFX0.SUCC */
)
}
}

if there someone who can help me ?

 

[Feartech]

Hi, I'm a beginner, prepared my first pc and all is ok except the battery
I downloaded DSDT with Clover (F4) and disassembled with iasl, before modifying it with a patch I tried to compile with MaciASL and I found some errors
many has been fixed but now I'm stuck on this piece of code and don't know how to change it:

If (LEqual (GESF, 0x15))
{
If (LEqual (PARM, 0x01))
{
Or (\_SB.PCI0.AUDE, 0x20, \_SB.PCI0.AUDE)
\_SB.PCI0.B0D3.ABWA (0x01)
\_SB.PCI0.B0D3.ARST (\_SB.PCI0.B0D3.ASTR (\_SB.PCI0.B0D3.AINI (\_SB.PCI0.B0D3.CXDC (\_SB.PCI0.B0D3.ABWA (0x00)
Notify (\_SB.PCI0, 0x00) // Bus Check)
If (LEqual (PARM, 0x00))
{
And (\_SB.PCI0.AUDE, 0xDF, \_SB.PCI0.AUDE)
Notify (\_SB.PCI0, 0x00) // Bus Check
}
Store (Zero, GESF) /* \_SB_.PCI0.GFX0.GESF */
)
Store (Zero, PARM) /* \_SB_.PCI0.GFX0.PARM */
Return (SUCC) /* \_SB_.PCI0.GFX0.SUCC */
Store (Zero, GESF) /* \_SB_.PCI0.GFX0.GESF */
)
Return (SUCC) /* \_SB_.PCI0.GFX0.SUCC */
)
}
}

if there someone who can help me ?

or you could use the hot patch files from here instead:

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

Overview The purpose of this guide is to provide a step-by-step guide to installing Mojave, High Sierra, Sierra, El Capitan, or Yosemite on the ProBook/EliteBook/Zbook equipped with Intel graphics. Note: For Broadwell and Skylake hardware, you must install at least 10.11. Broadwell support in...

www.tonymacx86.com