Contribute
Register

[GUIDE] OC 10.13.6 Z490 Gigabyte Aorus Xtreme + Core i5 10400 / i9 11900K + Nvidia GTX 1060

When downloading via iGPU, the download seems to be successful, but at the last moment the HDMI signal falls off. When trying to boot with the settings for NVIDIA, an error appears (as I understand it, related to the NVIDIA Web Driver). Please check my EFI versions for possible errors made by me. Thank you very much in advance!
 

Attachments

  • IMG_9426.jpg
    IMG_9426.jpg
    2.8 MB · Views: 49
  • EFI on IGPU.rar
    7.5 MB · Views: 66
  • EFI on NVIDIA.rar
    7.5 MB · Views: 58
When downloading via iGPU, the download seems to be successful, but at the last moment the HDMI signal falls off. When trying to boot with the settings for NVIDIA, an error appears (as I understand it, related to the NVIDIA Web Driver). Please check my EFI versions for possible errors made by me. Thank you very much in advance!
I see you used Ochang's build instead. That's okay, try this one for the Intel IGPU. You had AMD Radeonboost enabled which would have affected the booting up. But please add in the ROM value in SMBIOS (which was empty) - I've currently set it to '11 22 33 44 55 66' but you must replace it - this is your Ethernet port's MAC address value (which can be found using Windows or Linux device system properties).
 

Attachments

  • rekurs-EFI-1.zip
    8 MB · Views: 71
Unfortunately, this did not help either. When booting with a given EFI and a disconnected NVIDIA, the boot starts, and stops at an error:

smc light sensor als:0 No iterator

After that, the signal to the monitor and the black screen disappear.
 

Attachments

  • IMG_9433.PNG
    IMG_9433.PNG
    5 MB · Views: 54
Unfortunately, this did not help either. When booting with a given EFI and a disconnected NVIDIA, the boot starts, and stops at an error:

smc light sensor als:0 No iterator

After that, the signal to the monitor and the black screen disappear.
SMCBatteryManager.kext is for laptop system
 
the EFI/OS/Kext folder is missing SMCBatteryManager.kext
your screenshot shows it is trying to load

best to reset your nvram at the opencore boot menu/picker screen
 
After reset nvram the boot starts, and stops at an error:
 

Attachments

  • IMG_9436.jpeg
    IMG_9436.jpeg
    556.4 KB · Views: 53
After reset nvram the boot starts, and stops at an error:
strange as you can still see the message about SMCBatteryManager.kext trying to load

sure you are booting from the correct EFI?
 
strange as you can still see the message about SMCBatteryManager.kext trying to load

sure you are booting from the correct EFI?
yes
 

Attachments

  • EFI.rar
    7.5 MB · Views: 43
strange as you can still see the message about SMCBatteryManager.kext trying to load
Could be kexts in /Library/Extensions ?
 
Back
Top