- Joined
- Mar 2, 2016
- Messages
- 71
- Mac
- Classic Mac
- Mobile Phone
I'm having a very weird issue with power management.
I have HWP enabled and working, with injected frequency vectors. I have noticed that my battery life vastly improves if I briefly plug in an AC adapter. I don't have to charge the computer, just have to get it to recognize the AC adapter and battery management will improve after the AC adapter is unplugged
I'm using SSDT-PluginType1 as opposed to the full SSDT from ssdtprgen.sh, and X86PlatformPlugin is loaded.
I have attached the output from AppleIntelInfo.kext from my laptop with a 6200u. I am not sure how to tell from this info if power management is working properly or not.
CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 500 MHz
CPU Maximum non-Turbo Frequency....: 2200 MHz
CPU Maximum Turbo Frequency........: 2700 MHz
IGPU Info:
------------------------------------
IGPU Current Frequency.............: 500 MHz
IGPU Minimum Frequency.............: 300 MHz
IGPU Maximum Non-Turbo Frequency...: 300 MHz
IGPU Maximum Turbo Frequency.......: 900 MHz
IGPU Maximum limit.................: No Limit
CPU P-States [ (13) 20 25 ] iGPU P-States [ (10) ]
CPU C3-Cores [ 1 2 3 ]
CPU C6-Cores [ 0 1 2 3 ]
CPU C7-Cores [ 0 1 2 3 ]
CPU P-States [ (13) 15 20 25 ] iGPU P-States [ (10) ]
CPU C3-Cores [ 0 1 2 3 ]
CPU P-States [ (13) 15 18 20 25 ] iGPU P-States [ (10) ]
CPU P-States [ (13) 15 17 18 20 25 ] iGPU P-States [ (10) ]
CPU P-States [ (13) 14 15 17 18 20 25 ] iGPU P-States [ (10) ]
CPU P-States [ 13 14 15 17 18 20 (22) 25 ] iGPU P-States [ (10) ]
CPU P-States [ (13) 14 15 16 17 18 20 22 25 ] iGPU P-States [ (10) ]
AEs-MacBook-Pro:~ ae$ ./ssdtPRGen.sh
ssdtPRGen.sh v0.9 Copyright (c) 2011-2012 by † RevoGirl
v6.6 Copyright (c) 2013 by † Jeroen
v21.5 Copyright (c) 2013-2017 by Pike R. Alpha
-----------------------------------------------------------
Bugs > https://github.com/Piker-Alpha/ssdtPRGen.sh/issues <
System information: Mac OS X 10.12.4 (16E195)
Brandstring: "Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz"
Version: models.cfg v170 / Broadwell.cfg v151
Scope (_PR_) {222 bytes} with ACPI Processor declarations found in DSDT (ACPI 1.0 compliant)
Notice: The LFM frequency in Mac-E43C1C25D4880AD6.plist is set to 1300 MHz!
This restriction can be lifted with help of freqVectorsEdit.sh from:
https://github.com/Piker-Alpha/freqVectorsEdit.sh
Generating ssdt.dsl for a 'MacBookPro12,1' with board-id [Mac-E43C1C25D4880AD6]
Broadwell Core i5-5200U processor [0x306D4] setup [0x0606]
With a maximum TDP of 15 Watt, as specified by Intel
Number logical CPU's: 4 (Core Frequency: 2200 MHz)
Number of Turbo States: 5 (2300-2700 MHz)
Number of P-States: 20 (800-2700 MHz)
Adjusting C-States for detected (mobile) processor
Injected C-States for CPU0 (C1,C3,C6,C7)
Injected C-States for CPU1 (C1,C2,C3,C6,C7)
Warning: 'cpu-type' may be set improperly (0x0606 instead of 0x0906)
- Clover users should read https://clover-wiki.zetam.org/Configuration/CPU#cpu_type
Compiling: ssdt_pr.dsl
[/quorw]
What is your suggestion, RehabMan?
Thanks
I found it! I reapplied the guide and checked the terminal log and guess what?
Notice: The LFM frequency in Mac-E43C1C25D4880AD6.plist is set to 1300 MHz!
I did and decided not to go with it and used SSDT-PluginType1 instead. But kext is not loading now. Should I add SSDT-PluginType1 to clover config's sortedorder?
How can I make it to load with dropoem=true (also with sortedorder) then?