[Guide] MultiBooting for the novice. Updated 3/12 see log

[SiDiUS]

Linux 1.0 GB disk1s2 it is /boot where GRUB installed
Linux 15.0 GB disk1s3 /
Linux_Swap 4.0 GB disk1s5
Linux 33.7 GB disk1s6 /home

Spoiler

sids-iMac:~ sid$ diskutil list

/dev/disk0

   #:                       TYPE NAME                    SIZE       IDENTIFIER

   0:      GUID_partition_scheme                        *120.0 GB   disk0

   1:                        EFI EFI                     209.7 MB   disk0s1

   2:                  Apple_HFS MacOS                   119.2 GB   disk0s2

   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3

/dev/disk1

   #:                       TYPE NAME                    SIZE       IDENTIFIER

   0:     FDisk_partition_scheme                        *256.1 GB   disk1

   1:               Windows_NTFS Win10                   202.4 GB   disk1s1

   2:                      Linux                         1.0 GB     disk1s2

   3:                      Linux                         15.0 GB    disk1s3

   4:                 Linux_Swap                         4.0 GB     disk1s5

   5:                      Linux                         33.7 GB    disk1s6

/dev/disk2

   #:                       TYPE NAME                    SIZE       IDENTIFIER

   0:     FDisk_partition_scheme                        *500.1 GB   disk2

   1:               Windows_NTFS SOFT                    500.1 GB   disk2s1

sids-iMac:~ sid$
[/spoiler]

 

[SiDiUS]

Hm...i found TerminalSavedOutput.txt in root folder of Win10....i think this is output F2 or F10?
this is completely the language of elfs for me)
this output tell me nothing)

 

[Going Bald]

from bdmsg.txt

:068  0:000  Found 13 volumes with blockIO
4:068  0:000  - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
4:069  0:001          Result of bootcode detection: bootable unknown (legacy)
4:069  0:000  - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)
4:071  0:001          Result of bootcode detection: bootable unknown (legacy)
4:071  0:000  - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
4:072  0:000          Result of bootcode detection: bootable unknown (legacy)
4:072  0:000  - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,0A5B96CB-EF44-47CC-B9DD-1104E40D3969,0x28,0x64000)
4:072  0:000          Result of bootcode detection: bootable unknown (legacy)
4:072  0:000  - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,34C662D8-9714-4A08-AF31-70E5EE89E446,0x64028,0xDDFAC40)
4:072  0:000          Result of bootcode detection: bootable unknown (legacy)
4:072  0:000          This is SelfVolume !!
4:072  0:000  - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,D1669AC5-3C63-4BB9-8C80-4AE1FB353FCB,0xDE5EC68,0x135F20)
4:072  0:000          hiding this volume
4:072  0:000  - [06]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(1,MBR,0x4B6053BC,0x800,0x178F1800)
4:073  0:000          Result of bootcode detection: bootable Windows (vista,win)
4:073  0:000  - [07]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(2,MBR,0x4B6053BC,0x178F2000,0x1DD000)
4:073  0:000          Result of bootcode detection: bootable Linux (grub,linux)
4:074  0:000  - [08]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(3,MBR,0x4B6053BC,0x1C102800,0x1BF0800)
4:074  0:000  - [09]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(4,MBR,0x4B6053BC,0x17ACF7FE,0x4633002)
4:074  0:000  - [10]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(4,MBR,0x4B6053BC,0x17ACF7FE,0x4633002)\HD(1,MBR,0x00000000,0x17ACF800,0x773000)
4:074  0:000  - [11]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(4,MBR,0x4B6053BC,0x17ACF7FE,0x4633002)\HD(2,MBR,0x00000000,0x18243000,0x3EBF800)
4:075  0:000  - [12]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,MBR,0x10D1E302,0x800,0x3A385800)

gives you the volume UUID of each of the partition/volumes on your drives.
Use the output of terminal command diskutil list to determine the volume UUID corresponding to the partition containing your Linux boot files and enter it into the Clover config.plist
From what I see here, volume 7 is your Linux drive

 

[SiDiUS]

nothing....just black screen and blinking cursor
i will install Debian9 to check out does it has same issue.
Because of LinuxMint boots just fine from clover...

 

[Going Bald]

@SiDiUS

I now see what may be your problem. Query - is your Clover boot loader installed in the ESP or in root?
Suggest this - mount EFI partition
Back up the EFI folder off-line to a USB
Delete the entire contents of the partition.
Download latest Clover from Sourceforge
Install Clover with the "UEFI" and "Install in the ESP" boxes unchecked.
This will install Clover in the root of your Mac OS install.
Replace the config.plist in the Clover folder, add fakesmc and ethernet kext to kexts/other and reboot.
Does your Linux icon appear in the Clover screen? Will it boot if you select the icon and hit enter?