- Joined
- Jun 2, 2011
- Messages
- 32
- Motherboard
- Supermicro X9DAI Clover
- CPU
- 2x E5-2670v1
- Graphics
- Radeon VII
- Mac
- Mobile Phone
Hi,
this EFI Folder contains the Setup for:
I suggest you grab a HDD/SSD, put it into a USB Enclosure, grab a Mac, download Mojave, start Setup and Select the external Disk. When the setup first asks you to restart, do it, but don´t boot into the setup hard drive but into the internal one. Then copy the EFI Folder onto the EFI Volume of the external Disk, put it in the Rig and finish setup from there. Thats the easiest way.
Don´t forget to change the Serial and UUID in the config.plist first.
Have fun!
this EFI Folder contains the Setup for:
SM X9Dai
Dual E5-2670v1
Radeon VII (Slot-5)
Both integrated Ethernet Cards
USB2.0 + Renesas USB 3.0 (with mXHCD.kext)
Audio (ALC889) is not working because of instabilities with GPU
Set your Bios to default, then change the following settings:Chipset > North Bridge:
VT-d: off
Slot-5 x16
Chipset > South Bridge:
Azalia HD: Disabled
SATA Configuration:
Agressive Link Power Management: Disabled (freezes the Rig sometimes)
SAS Configuration:
SCU Devices: disabled
PCIe/PCI Configuration:
PCI Rom Priority: UEFI
Graphic Rom: UEFI
(Never enable Above 4GB Decoding, it gives you black Screen, unable to get into Bios again)
Disable all PCIe Slot Option Roms
Disable Lan option Rom
ACPI Settings:
Sleep State: S3
Boot:
Boot Option: UEFI
(Add your Mac Hard drive with Clover as UEFI OS Boot Option.)
I suggest you grab a HDD/SSD, put it into a USB Enclosure, grab a Mac, download Mojave, start Setup and Select the external Disk. When the setup first asks you to restart, do it, but don´t boot into the setup hard drive but into the internal one. Then copy the EFI Folder onto the EFI Volume of the external Disk, put it in the Rig and finish setup from there. Thats the easiest way.
Don´t forget to change the Serial and UUID in the config.plist first.
Have fun!