- Joined
- Oct 5, 2012
- Messages
- 39
- Motherboard
- Gigabyte Z390 Aorus Elite
- CPU
- i7-9700
- Graphics
- ASUS RADEON RX 6600
- Mac
I did some more testing and after STOP the screen remains black. Shooting after the screensaver works fine however. If I can solve the "recovery after hibernation" I'm done! Thanks again for what you can advise me.Anyway, here goes the EFI with those changes, you see that alcid=11 is added in boot-args and AppleALC.kext is added into the Kexts folder and also in config.plist> Kernel> Add at the end of the other kexts that already exist.
Have you enabled Audio controller in BIOS? I attach also USB and Power BIOS screens.View attachment 505078View attachment 505079
I did some more testing and after STOP the screen remains black.I forgot to mention that I don't use the integrated audio, for it to work you have to do 2 things:
For sleep, you have to do the No-hda-gfx instead of hda-gfx change that I mentioned in my previous article. With this change the problem is usually fixed, although not always.
- add ApleALC.kext in the kexts folder and in config.plist
- add alcid=11 in NVRAM> 7C436110-AB2A-4BBB-A880-FE41995C9F8> boot-args.
Don't go back to the EFi from the original post, stick with this one which is a more modern version of OpenCore and has some improvements.
Shooting after the screensaver works fine however.
If I can solve the "recovery after hibernation" I'm done!
Thanks again for what you can advise me.