[Guide] Lenovo Z50-70/Z40-70/G50-70/G40-70 using Clover UEFI

[rust]

Has anyone tried this network card driver?


OpenIntelWireless · GitHub

 

[rust]

Unable to update to 11.6.Do I need to change the settings?

 

[UkaTica]

Unable to update to 11.6.Do I need to change the settings?

I updated successfully.

 

[daigosx]

I updated successfully.

This

 

[daigosx]

Update time!
OC 0.7.4
Works with BigSur and is Monterey ready.
SystemProductName changed to MacBookPro11,5 you'll have to regenerate your NVRAM->PlatformInfo

Download the latest OCBinaryData if you want a working OpenCanopy GUI

Disconnect your apple id before you upgrade the EFI

Have fun

 

[daigosx]

 

[mrugeshtank]

View attachment 532092

Awesome!

Just update Open core with your zip, and SMBIOS?
Or need to take any further steps?

I'm generating SMBIOS from here but all serial numbers are invalid if I check here .
Should I choose invalid Serial number or keep searching for valid serial number?

 

[daigosx]

Awesome!

Just update Open core with your zip, and SMBIOS?
Or need to take any further steps?

I'm generating SMBIOS from here but all serial numbers are invalid if I check here .
Should I choose invalid Serial number or keep searching for valid serial number?

Invalid serial numbers are fine.

Proper steps:

1. Disconnect your apple ID (you can reconnect after the update)
2. Put my EFI on an USB
3. Add SMBIOS info to the config.plist
4. Start from USB
5. Check everything is ok
6. Put the new EFI on your HDD/SDD
7. Start from HDD/SDD
8. System update
9. Wait (about 1 hour and some reboots)
10. Enjoy

 

[daigosx]

If you have bluetooth issues after wake please check hibernatemode and proximitywake with:
pmset -g
both should be at 0
if they aren't issue those commands:
pmset -a proximitywake 0
pmset -a hibernatemode 0

 

[almatriste]

View attachment 532092

Hi daigosx, I put your EFI on an usb but the laptop, lenovo z50-70, not switch on hdmi to login. Can you help me please?