[Guide] Lenovo Y50/Y70 (UHD or 1080p) using Clover UEFI

[RehabMan]

[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI

Ok, so I updated to 10.10.4. Everything during update went smooth. But when I rebooted the screen at login screen went black.

Although the boot process went well the screen was black and only sometimes it flashed with 'normal' picture. My guess is that the update broke graphic kext.

I use 1080p Lenovo. Do you have any ideas what could help?

Post EFI/Clover folder.

 

[bikowalczyk1]

[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI

Post EFI/Clover folder.

Here you are.

 

[RehabMan]

[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI

Here you are.

You did not follow the guide. Refer to post #1 for proper ACPI patching, config.plist setup, etc.

If you prepare a USB according to post #1, you should be able to boot your system and then follow the rest of it for proper setup.

 

[bikowalczyk1]

[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI

You did not follow the guide. Refer to post #1 for proper ACPI patching, config.plist setup, etc.

If you prepare a USB according to post #1, you should be able to boot your system and then follow the rest of it for proper setup.

Well I did follow a guide, but the older one Do you want me to reinstall my current system with the new one? Will I lose all of my files?

 

[RehabMan]

[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI

Well I did follow a guide, but the older one Do you want me to reinstall my current system with the new one? Will I lose all of my files?

Just do what I outlined in #587.

You may have to undo a number of things you may have done from the other guide (eg. this guide doesn't use VoodooHDA).

For best result, it might be best to start over and follow post #1 exactly. Your call whether you want to start over or try to fix what you have.

 

[bikowalczyk1]

[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI

Just do what I outlined in #587.

You may have to undo a number of things you may have done from the other guide (eg. this guide doesn't use VoodooHDA).

For best result, it might be best to start over and follow post #1 exactly. Your call whether you want to start over or try to fix what you have.

I followed your guide. Did all the steps using terminal, installed CLOVER to hdd, but still when I boot from HDD I come upon the same problem (well now the screen isn't flashing. It just goes black).

When I boot from USB I manage to log into my old Yosemite, but I sometimes get graphics lag (eg.attachment).

I reminded updating BIOS to 3.00v right before I updated OSX to 10.10.4

Thanks

 

[RehabMan]

[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI

I followed your guide. Did all the steps using terminal, installed CLOVER to hdd, but still when I boot from HDD I come upon the same problem (well now the screen isn't flashing. It just goes black).

When I boot from USB I manage to log into my old Yosemite, but I sometimes get graphics lag (eg.attachment).

I reminded updating BIOS to 3.00v right before I updated OSX to 10.10.4

Thanks

Try external monitor. Also try boot without caches. If successful, post ioreg.

Otherwise boot with USB and post ioreg.

Do you have legacy boot/CSM enabled or disabled in BIOS?

 

[bikowalczyk1]

[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI

Try external monitor. Also try boot without caches. If successful, post ioreg.

Otherwise boot with USB and post ioreg.

Do you have legacy boot/CSM enabled or disabled in BIOS?

Using external monitor turned out to be sucessful. No glitches so far.

Legacy boot is enabled, but UEFI is switched to boot first.

 

[RehabMan]

[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI

Using external monitor turned out to be sucessful. No glitches so far.

Legacy boot is enabled, but UEFI is switched to boot first.

Try disabling legacy/CSM in BIOS. If that is the issue, I'll fix in post #1.

Power management is not implemented. Refer to post #1.

 

[bikowalczyk1]

[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI

Try disabling legacy/CSM in BIOS. If that is the issue, I'll fix in post #1.

Power management is not implemented. Refer to post #1.

Changed BIOS settings, but it didn't solved the problem. Now I noticed that the start-up screen (apple logo and progress bar) is gently fading into black screen. Previously it was done in a blink of an eye, and much more later (progress bar took longer to fill).

I'm thinking maybe I can replace the CLOVER folder on EFI Partition with the one on the pendrive. Do you think it may work?

Also when I boot without hdmi cable in, and plug in after the screen goes black, laptop restarts and OSX says it has crashed and if I want to report this problem to Apple.