Contribute
Register

[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI (10.11)

Status
Not open for further replies.
That is strange. Even after manually editing the kext, (replaced 01050900 00040000 87000000 to 01051200 00080000 87000000) and (01050900 00040000 07010000 to 01051200 00080000 07010000), now there is no kernel panic, but the connector type under framebuffer@1 remains unchanged at 00040000. I remembered to update the kext cache, in any case, I also tried ignoring the kext cache at boot (-f).

Before or after plugging the HDMI device in?
 
It is the same regardless. The connector type is 000400 with or without plugging in the HDMI device. (I have attached the ioreg without plugging in the monitor). The connector type for frame buffer 0 is 02000000, which I'm assuming is correct.
 

Attachments

  • Y50_ioreg_2_300118.ioreg
    4.2 MB · Views: 155
It is the same regardless. The connector type is 000400 with or without plugging in the HDMI device. (I have attached the ioreg without plugging in the monitor). The connector type for frame buffer 0 is 02000000, which I'm assuming is correct.

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the tool mentioned in the FAQ, that way it is less likely you'll omit something.
 
Status
Not open for further replies.
Back
Top