Contribute
Register

[Guide] Lenovo V510-15ikb

Status
Not open for further replies.
I see an error on hda-gfx on onboard=1 instead on onboard-1 , i correct but also have reboot
 

Attachments

  • debug_15944.zip
    2 MB · Views: 105
But I don'y understand:

I remove all framebuffer-conX patches. After reboot and open IOReg to search AppleIntelFrameBuffer and see that my HDMI connector is @con1 ( I see connctor-type is 8000 hdmi). After I edit only the @con1 with the type 8000 and pipe to 12000 for don't have reboot but don't work.

The other connector i don't understand, @con0 i don't have to touch, the @con1 is the HDMI ( for the type) and the @con2 is 4000 ( the DP ) but i don't have.

The consuete log

connector-type cannot be used as an indication of which connector is used by your HDMI port.
 
but I have to enable conX-flags or not?
 
I try to comment the con-flags but have always a reboot :(
 

Attachments

  • debug_31503.zip
    2 MB · Views: 95
but I have to enable conX-flags or not?

If you read the guide, you will see no mention of it.
So why are you patching them?

I try to comment the con-flags but have always a reboot :(

Try changing conX-pipe to only one connector at a time.

Also, you may need FakePCIID_Intel_HDMI_Audio.kext.
 
I try to use FakePCIID_Intel_HDMI_Audio.kext and enable one at time for conX-pipe, always reboot
 

Attachments

  • debug_13473.zip
    2.1 MB · Views: 99
I try to use FakePCIID_Intel_HDMI_Audio.kext and enable one at time for conX-pipe, always reboot

Make sure you test patching con2-type/con2-pipe (without patching con1).
 
I don't have resolve the hdmi , but I see have another problem, the jack 3.5 audio is very poor... it's work but there is a noise on the background
 

Attachments

  • debug_17103.zip
    1.9 MB · Views: 95
Status
Not open for further replies.
Back
Top