[Guide] Lenovo V510-15ikb

[RehabMan]

For the 4,1 is my error when I write , i would like 14.1
Now Ioreg tell me Macbook 14,1, but the HDMI reboot when I plugin the HDMI Cable.

For information, when I switch the config.plist with the updated on the first post on the first reboot works, after the osx not start again.

Make sure you're not trying to use the attached DSDT.aml in post #1.
You can never use patched ACPI from another computer.
Refer to the ACPI patching guide (linked from the FAQ) and patch your own.

 

[yota79]

But now i restore my original EFI with ACPI and I'd like only to do working HDMi, remaining to use ACPI and "old" powersafe .

 

[RehabMan]

But now i restore my original EFI with ACPI and I'd like only to do working HDMi, remaining to use ACPI and "old" powersafe .

Any change requires new PR files.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[yota79]

But when I restore all works , now I'd like only to use the HDMI.
But you tell also for the change @2 and @1 HDMI I have to re-patch ACPI???

 

[RehabMan]

But when I restore all works , now I'd like only to use the HDMI.
But you tell also for the change @2 and @1 HDMI I have to re-patch ACPI???

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[yota79]

i attach the file but is the same as 3 topics ago

 

[RehabMan]

i attach the file but is the same as 3 topics ago

Remove all framebuffer-conX patches. Then refer to the guide:
https://www.tonymacx86.com/threads/...ndy-bridge-kaby-lake-and-likely-later.189495/

 

[yota79]

But why if i copy this information from the config.plist upgraded on the first post my lenovo reboot? In this case i need always to re-patch the ACPI ? Also for this information?

 

[yota79]

But I don'y understand:

I remove all framebuffer-conX patches. After reboot and open IOReg to search AppleIntelFrameBuffer and see that my HDMI connector is @con1 ( I see connctor-type is 8000 hdmi). After I edit only the @con1 with the type 8000 and pipe to 12000 for don't have reboot but don't work.

The other connector i don't understand, @con0 i don't have to touch, the @con1 is the HDMI ( for the type) and the @con2 is 4000 ( the DP ) but i don't have.

The consuete log

 

[yota79]

I also enable hda-gfx

HDEF is at PciRoot(0)/Pci(0x1f,3) on Skylake and later

but the system reboot always.