Contribute
Register

[Guide] Lenovo V510-15ikb

Status
Not open for further replies.
yota79 said:
I try to update from 10.14 to 10.14.1

Download the update
Reboot and start with new entry "Boot from Install Mojave"

The system start but going on kernel panic with this module

What is the correct procedure to upgrade? I have lo start with fake gpu-id , do the update, and after boot with the correct gpu-id?

https://ibb.co/g8KwHf
Click to expand...
No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 
I upload the screenshoot , but now you have also the log
 

Attachments

  • debug_14948.zip
    1.9 MB · Views: 65
you tell me to leave and install on LE!!!

:(:(:(

I never understand
 
Ok I understand . I put all my kext on /EFI/Clover/kext/Other and I can do the update. After the update i remove the kext from Other and leave the other installed on LE:

But, I see , you tell as "essential" kext the :

FakeSMC.kext, VoodooPS2Controller.kext, Lilu.kext, WhateverGreen.kext

But yesterday my error is on AppleIntelKBLGraphicframebuffer.kext

Now I ask:

For the essential is only 4 I mentioned over it, or I have to "find" ( but I don't know how) my "essential" kext ??
 
yota79 said:
Ok I understand . I put all my kext on /EFI/Clover/kext/Other and I can do the update. After the update i remove the kext from Other and leave the other installed on LE:

But, I see , you tell as "essential" kext the :

FakeSMC.kext, VoodooPS2Controller.kext, Lilu.kext, WhateverGreen.kext

But yesterday my error is on AppleIntelKBLGraphicframebuffer.kext

Now I ask:

For the essential is only 4 I mentioned over it, or I have to "find" ( but I don't know how) my "essential" kext ??
Click to expand...

Essential kexts are those you need for use of the installer and/or recovery partition.
 
*** Panic Report ***

panic(cpu 2 caller 0xffffff80112d84dd): Kernel trap at 0xffffff7f91e425b1, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00007fc92670b4f0, CR3: 0x0000000025d89000, CR4: 0x00000000003626e0
RAX: 0x0000000000000000, RBX: 0xffffff80f2219000, RCX: 0x0000000000000fa0, RDX: 0x0000000000000100
RSP: 0xffffff812d3c3cb0, RBP: 0xffffff812d3c3d50, RSI: 0x00000000000000fa, RDI: 0xffffff80f2219000
R8: 0x0000000000000000, R9: 0x0000000000989680, R10: 0xffffff8011bedc80, R11: 0xffffff8011bedc80
R12: 0xffffff812d3c3f30, R13: 0xffffff812d3a5000, R14: 0xffffff80f2219000, R15: 0xffffff80f2219000
RFL: 0x0000000000010206, RIP: 0xffffff7f91e425b1, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffff812d3a5fa0, Error code: 0x0000000000000000, Fault CPU: 0x1, PL: 0, VF: 1

Kernel Extensions in backtrace:
com.apple.iokit.IONetworkingFamily(3.4)[A37DBC4E-D518-3B2B-8736-AE6B88C53D9C]@0xffffff7f91dac000->0xffffff7f91ddbff
com.insanelymac.RealtekRTL8111(2.2.2)[24D129C7-C25C-3D7B-9E10-EA71D9BE6511]@0xffffff7f91de3000->0xffffff7f91e49fff
dependency: com.apple.iokit.IONetworkingFamily(3.4)[A37DBC4E-D518-3B2B-8736-AE6B88C53D9C]@0xffffff7f91dac000
dependency: com.apple.iokit.IOPCIFamily(2.9)[7DE930EC-AB73-3F5A-9D38-94D5EE90D197]@0xffffff7f91a99000

It's correct that I see the problem is for the kext RealtekRTL8111 ? I see the kext is not updated from 2017...
 

Attachments

  • debug_23201.zip
    1.9 MB · Views: 67
Sometimes when enable wifi ( other times works without problem) the osx reboot and on the first reboot have problem to start.
I have to poweroff from button and re-poweron to start.
 

Attachments

  • debug_24008.zip
    1.8 MB · Views: 70
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top