[Guide] Lenovo V510-15ikb

[RehabMan]

But I use the same ig-platform-id from the config.plist find on the topic. I don’t have to use the same?

In your config.plist, you have 0x19168086 (invalid).
In post #1 config.plist, it is 0x19160000 (valid Skylake id, suitable if doing SKL spoof on KBL).

 

[yota79]

I try both value 19168086 and 19160000.

But now i change the value in config.plist ( to re-try the 19160000 ) also in Device-IntelGFX and Graphics-og-platform-id , clear NVRAM with F11 on boot cloverEFI but the value in properties from apple remainng 19168086 ( the oldest )

 

[RehabMan]

I try both value 19168086 and 19160000.

But now i change the value in config.plist ( to re-try the 19160000 ) also in Device-IntelGFX and Graphics-og-platform-id , clear NVRAM with F11 on boot cloverEFI but the value in properties from apple remainng 19168086 ( the oldest )

0x19168086 is invalid.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[yota79]

Yes I understand is invalid, now i set on my config.plist 19160000 , but when the system boot up i found always 19168086

 

[RehabMan]

Yes I understand is invalid, now i set on my config.plist 19160000 , but when the system boot up i found always 19168086

Still no PR files attached.

 

[yota79]

here we are

p.s: thank you for the patience

 

[RehabMan]

here we are

p.s: thank you for the patience

Valid ig-platform-id for Skylake is injected.
But you're injecting an invalid device-id (0x19168086) is not valid.
Your device-id in config.plist/Properties/PciRoot(0)/Pci(0x02,0) should be <16190000> not <86801619>

 

[yota79]

how i can take the log? The system hang.

It's ok if i start modified the value and collect the log?

 

[RehabMan]

how i can take the log? The system hang.

It's ok if i start modified the value and collect the log?

boot with invalid ig-platform-id.

Don't forget to fix your profile. It is important as your question cannot be answered without correct details in your profile.

 

[yota79]

Here the dump log .

I think the resolution for this notebook is 1080P ( 1920*1080 ). But is not possible to start lower ( 720P ) and after change from osx?