Contribute
Register

[Guide] Lenovo U310/U410 using Clover UEFI (10.11)

Status
Not open for further replies.
No. That would break brightness control.
Thank you!
I've just tried HDMI connecting to TV. Video works but seems like HDMI audio is not working.
I also had this in KextsToPatch
Comment: 0x11d4198a to zero
MatchOS: 10.12.x
Name: AppleHDA
Find: <8a19d411>
Replace: <00000000>
 

Attachments

  • Jeff-MacBook Air.ioreg.zip
    722.1 KB · Views: 76
  • Output.txt.zip
    1.7 KB · Views: 72
  • RehabMan.zip
    20.2 KB · Views: 72
My HDMI port is associated with AppleIntelFramebuffer@1, which is connector 0105. I only see patches for other ports 0204, 0306, 0406.
It was working fine with 10.11.6 though

There is no 0105, no 0205 port in the Capri kext. In Capri, your @1 (0x01660003) is 0205.
You have already patched it for HDMI, which can be seen clearly in ioreg.

But you did not inject "hda-gfx"="onboard-1".
Read the guide carefully.
 
There is no 0105, no 0205 port in the Capri kext. In Capri, your @1 (0x01660003) is 0205.
You have already patched it for HDMI, which can be seen clearly in ioreg.

But you did not inject "hda-gfx"="onboard-1".
Read the guide carefully.
Thank you! I am re-reading it now. Kind of confused about the value of AddProperties\PinConfigurations.
 
Thank you! I am re-reading it now. Kind of confused about the value of AddProperties\PinConfigurations.

The value for that property should be empty... plus you're probably injecting it already with ACPI.
 
The value for that property should be empty... plus you're probably injecting it already with ACPI.
/
Also, AddProperties\layout-id, if mine is 12, do I enter <0C000000>?
 
Status
Not open for further replies.
Back
Top