Contribute
Register

[Guide] Lenovo T460 Hackintosh 10.11 & Dual Boot

Status
Not open for further replies.
Without a BIOS WiFi whitelist, any BCM94352Z will work.
It's totally clear that without BIOS whitelist BCM94352Z will work... I'm asking these guys who have already replaced the card on this notebook and know for sure. In the first post BCM94352Z is noted as replaced and working:
  • Wifi/BT (replaced Intel card for a BCM94352Z)
That's why I am asking for confirmation.
 
It's totally clear that without BIOS whitelist BCM94352Z will work... I'm asking these guys who have already replaced the card on this notebook and know for sure. In the first post BCM94352Z is noted as replaced and working:
  • Wifi/BT (replaced Intel card for a BCM94352Z)
That's why I am asking for confirmation.

Seems to me the text in post #1 is confirmation enough.
 
I have the same problem as @BadBiscuit with the UltraDock on my T440P with Mojave. Computer shuts down and starts up properly when not on the dock. However, on the dock, startup works fine but on shutdown there is a problem that prevents a full shutdown and the computer simply restarts. Any ideas?
 
I successfully installed a triple booting (Windows, Linux, macOS) T460s (i5-6300U 8GB 128GB SATA SSD) following this guide with some adaptations, thought I am a bit afraid to perform an upgrade to Sierra. Has anybody on this thread made the upgrade? Guess I will eventually take the plunge, but I am wanting some encouragement ;-).

As it is now there are some annoyances. The card reader does not work, bluetooth is ok, but wireless is not (haven't changed the card yet), I am yet to dial the keyboard 100% to my locale, and during login, the button in the left of the user name "<" always appears distorted. Also, The only Clover that works is the one that is in the ZIPs in this guide. Could not upgrade it, whichever version I tried.

On the plus side, It works fine with the dock, all ports I tested up to now working there, thought oddly enough the DisplayPort can drive my 2560x1440 monitor only in 1080p. With DVI I can obtain the 1200p resolution that is supported by the monitor with this port. But with HDMI I have full 2560x1440p resolution. I guess will just wait on a Memory and SSD upgrade, pending parts arrival, prior to try the jump to Sierra again.

Anyway, HUGE THANK YOU to the author of the guide and everybody else who helped develop it to it´s current state.


Hi @UMineiro I was wondering if your machine can go to sleep while in dock and wake up normally? For me, if my lenovo docks and i let it sleep or shut down, it will have a panic and reboot.
Usually the system report is as follow:


Code:
panic(cpu 2 caller 0xffffff8019a4c32a): Kernel trap at 0xffffff7f9de303c3, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8209808800, CR3: 0x000000001ef1d000, CR4: 0x00000000001626e0
RAX: 0x000000000001b800, RBX: 0xffffff82097ed000, RCX: 0x0000000002200000, RDX: 0x00000000003ffff8
RSP: 0xffffff820634bd00, RBP: 0xffffff820634bd50, RSI: 0x0000000000001000, RDI: 0x0000000000000003
R8:  0x0000000000000003, R9:  0x00000000007ff000, R10: 0x000000000000000b, R11: 0x0000000000000003
R12: 0x0000000000000002, R13: 0xffffff803e684000, R14: 0x0000000000000000, R15: 0xffffff803e686cd8
RFL: 0x0000000000010203, RIP: 0xffffff7f9de303c3, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0xffffff8209808800, Error code: 0x0000000000000000, Fault CPU: 0x2, PL: 0, VF: 1

Backtrace (CPU 2), Frame : Return Address
0xffffff820634b760 : 0xffffff80199215cd mach_kernel : _handle_debugger_trap + 0x49d
0xffffff820634b7b0 : 0xffffff8019a5a3c5 mach_kernel : _kdp_i386_trap + 0x155
0xffffff820634b7f0 : 0xffffff8019a4bf7e mach_kernel : _kernel_trap + 0x4ee
0xffffff820634b840 : 0xffffff80198c7a40 mach_kernel : _return_from_trap + 0xe0
0xffffff820634b860 : 0xffffff8019920c97 mach_kernel : _DebuggerTrapWithState + 0x17
0xffffff820634b960 : 0xffffff8019921087 mach_kernel : _panic_trap_to_debugger + 0x227
0xffffff820634b9b0 : 0xffffff801a0c2c7c mach_kernel : _panic + 0x54
0xffffff820634ba20 : 0xffffff8019a4c32a mach_kernel : _sync_iss_to_iks + 0x2aa
0xffffff820634bba0 : 0xffffff8019a4c028 mach_kernel : _kernel_trap + 0x598
0xffffff820634bbf0 : 0xffffff80198c7a40 mach_kernel : _return_from_trap + 0xe0
0xffffff820634bc10 : 0xffffff7f9de303c3 com.apple.driver.AppleIntelBDWGraphicsFramebuffer : __ZN22AppleIntelFBController13FBMemMgr_InitEv + 0x1d5
0xffffff820634bd50 : 0xffffff7f9de2dcf8 com.apple.driver.AppleIntelBDWGraphicsFramebuffer : __ZN22AppleIntelFBController5startEP9IOService + 0xcce
0xffffff820634bde0 : 0xffffff801a008c06 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6
0xffffff820634be40 : 0xffffff801a008741 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xad1
0xffffff820634bef0 : 0xffffff801a007ade mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2de
0xffffff820634bf50 : 0xffffff801a00a296 mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x186
0xffffff820634bfa0 : 0xffffff80198c713e mach_kernel : _call_continuation + 0x2e
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelBDWGraphicsFramebuffer(14.0.5)[30E97770-5F7A-3992-932B-C5D9B5502E82]@0xffffff7f9de0c000->0xffffff7f9dfbbfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[1B1F3BBB-9212-3CF9-94F8-8FEF0D3ACEC4]@0xffffff7f9a331000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[9D1FF279-C4A2-3344-902F-E0B22B508689]@0xffffff7f9aa59000
            dependency: com.apple.iokit.IOAcceleratorFamily2(438.4.5)[33DA860E-90A6-3224-A944-93FA125B054E]@0xffffff7f9ad8e000
            dependency: com.apple.iokit.IOReportFamily(47)[337B24B2-0261-3521-8D1B-23387FC1D657]@0xffffff7f9a4e5000
            dependency: com.apple.AppleGraphicsDeviceControl(5.1.16)[56FDE242-D4A6-3E8F-A81C-CE9BA61E3828]@0xffffff7f9ae67000
            dependency: com.apple.iokit.IOGraphicsFamily(575.1)[D47CA481-C5E5-3F03-9B04-6634DF5F3121]@0xffffff7f9ad2f000

BSD process name corresponding to current thread: kernel_task
Boot args: -v keepsyms=1 debug=0x100 alcid=28 brcmfx-country=#a


Any idea how to solve a kernel panic when letting the laptop sleep while docked?

Cheers
 
Status
Not open for further replies.
Back
Top