[Guide] Lenovo Legion y530-y540 Laptop on Catalina 10.15

[Qim10]

How to do advanced BIOS options?
Yes i use latest 3.0.0 efi folder

 

[RaviKavaiya]

How to do advanced BIOS options?
Yes i use latest 3.0.0 efi folder

On THIS PAGE, see a file named 2018 Y7000 ... 10.15.x BIOS.......
Do the steps

 

[notdaba]

I really don't understand about the advanced bios thing. lol.

EDIT---MANAGED TO GET INSIDE.

 

[rcc622]

On THIS PAGE, see a file named 2018 Y7000 ... 10.15.x BIOS.......
Do the steps

Chek Post #2

BIOS ADVANCED OPTIONS

Spoiler: SOURCE

LEGION_Y7000Series_Hackintosh_Clover

"Overview
Because the BIOS settings of the y7000, y7000p, and y530 of the 2018 models are not compatible with the upgrade of 10.15.x, you need to enter the BIOS advanced mode to modify the related settings. Thank you for the BIOS modification solution provided by 965987400abc.

Enter BIOS Advanced Mode (for any version of BIOS)
Press FN + o + d at the same time in win / macOS (For foreign machine users, you only need to press FN + o, test by yourself)
After restarting, you can enter the advanced BIOS setting mode
Modify BIOS settings
Advanced> Debug settings> Kernel Debug Serial Port changed to Leagacy UART
Save and restart"

 

[gopidiego]

@rcc622 I've Mojave installed, can i upgrade to Catalina normally or do i start from scratch?

 

[notdaba]

Chek Post #2

Yes, this worked. Thanks.
Now I've managed to install all, just audio and track pad are not working..!

 

[rcc622]

@rcc622 I've Mojave installed, can i upgrade to Catalina normally or do i start from scratch?

Just make change on bios before upgrade
"Because the BIOS settings of the y7000, y7000p, and y530 of the 2018 models are not compatible with the upgrade of 10.15.x, you need to enter the BIOS advanced mode to modify the related settings. Thank you for the BIOS modification solution provided by 965987400abc

Enter BIOS Advanced Mode (for any version of BIOS)
Press FN + o + d at the same time in win / macOS (For foreign machine users, you only need to press FN + o, test by yourself)
After restarting, you can enter the advanced BIOS setting mode
Modify BIOS settings
Advanced> Debug settings> Kernel Debug Serial Port changed to Leagacy UART
Save and restart"

 

[rcc622]

Yes, this worked. Thanks.
Now I've managed to install all, just audio and track pad are not working..!

Please tell us more about your audio issues, these are new

 

[notdaba]

Please tell us more about your audio issues, these are new

Oh well.
Trackpad is not working at all, and also audio.
When I try to put the volume on, I just get the stop signal.

 

[rcc622]

Oh well.
Trackpad is not working at all, and also audio.
When I try to put the volume on, I just get the stop signal.

did you run the script?

>NOTES FROM .TXT FILE

Open a terminal and execute the following command
Code:
sudo sh -c "$ (curl -fsSL https://gitee.com/xiaoMGit/Y7000Series_Hackintosh_Fix/raw/master/Script/Optimize.sh)"