Contribute
Register

[Guide] Lenovo IdeaPad/XiaoXin 700-15ISK

Status
Not open for further replies.
jaakweep said:
SORRY. I MODIFIED THE CONFIG.PLIST & TRIED AGAIN, IT CAN REACH THE DESKTOP, BUT NO GRAPHIC ACCELERATION, IT ONLY SHOWS 7MB. PLS HELP. BTW, I AM WORKING GHANA, IF YOU COME TO GHANA, PLS TO BE MY GUEST.
Click to expand...

"Problem Reporting" files are incomplete/wrong.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 

Attachments

  • IMG_9356.JPG
    IMG_9356.JPG
    2.8 MB · Views: 114

Attachments

  • Screen Shot 2018-10-06 at 9.52.18 AM.png
    Screen Shot 2018-10-06 at 9.52.18 AM.png
    2.8 MB · Views: 193
  • CLOVER.zip
    5.8 MB · Views: 159
jaakweep said:
Finally, all worked fine except external display via HDMI port.
"FakePCIID.kext" should be removed from the kexts when using "WhateverGreen.kext“ for my situation.
Click to expand...
Thanks much. I'm gonna try again with your CLOVER now.
So, removing "FakePCIID.kext" should make the external display function properly?
 
HeRoKaNe said:
@jaakweep @mr.abdolian @milen4296 Any progress, guys?
Click to expand...
I booted the installer successfully last night using a fake ig-platform-id (0x12345678)... Then I continued the install process and the macOS Mojave installed successfully on my external HDD (for testing first)... but It didn't boot to the installed macOS... It stops at a certain point at first moments... I googled and it seems that the problem is RAM-related.
I tried using driver "OsxAptioFix3Drv-64.efi" instead of "AptioMemoryFix-64.efi" but no luck yet...
 

Attachments

  • mojave-boot-verbose.jpg
    mojave-boot-verbose.jpg
    534.2 KB · Views: 110
mr.abdolian said:
I booted the installer successfully last night using a fake ig-platform-id (0x12345678)... Then I continued the install process and the macOS Mojave installed successfully on my external HDD (for testing first)... but It didn't boot to the installed macOS... It stops at a certain point at first moments... I googled and it seems that the problem is RAM-related.
I tried using driver "OsxAptioFix3Drv-64.efi" instead of "AptioMemoryFix-64.efi" but no luck yet...
Click to expand...

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 
Dear RehabMan,

My xiaoxin-700 worked fine 99% with OS X 10.13.6,
but on OS X 10.14.1 meet some issuers as below:

dont work:
1. brightness controls
2. wake up after sleep
3. external display with HDMI
4. audio/mic

issuers:
1. will reboot after sleep a while

problems reporting files attached, please help me!

 

Attachments

  • problem-reporting.zip
    10.8 MB · Views: 105
jeff2481 said:
Dear RehabMan,

My xiaoxin-700 worked fine 99% with OS X 10.13.6,
but on OS X 10.14.1 meet some issuers as below:

dont work:
1. brightness controls
2. wake up after sleep
3. external display with HDMI
4. audio/mic

issuers:
1. will reboot after sleep a while

problems reporting files attached, please help me!
Click to expand...

MacBookPro13,3 not recommended. Use MacBookPro13,1 or MacBookPro11,1.
Brightness control:
https://www.tonymacx86.com/threads/...ontrol-using-applebacklightfixup-kext.218222/

Also, FAQ for audio:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Your kextcache shows serious problems with the set of kexts you installed.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top