- Joined
- Nov 3, 2012
- Messages
- 149
- Motherboard
- Gigabyte GA-B75M D3V
- CPU
- i5-3570K
- Graphics
- RX 560
- Mac
- Mobile Phone
UPDATE 10-4-2020
(Importand!!!!! From now on builds will be based on an unlocked CFG so please, if you don't have one modify config.plist settings.) Updated kexts changed config.plist settings for unlocked CFG (see above for method). Included a SSDT-PLUD for cpu Recreated CPUFriend Data Provider kext Installed 10.15.4 supplemental update with no problem
Options
In my EFI you will find an SSDT-PLUG.aml
1. CpuFriend kexts in kexts folder and SSDT-PLUG.aml in ACPI/Patched folder, with plugintype1=false in config.plist
2. CpuFriend kexts in kexts folder, NO SSDT-PLUG.aml in ACPI/Patched folder, with plugintype1=true in config.plist
(these two options give the same results. CPU base freq at 600Mhz, idle freq at 600mhz, core watts 0,30 at idle, PKG watts 1.70 at idle, cpu utilazation at 4,70 % and a bit more at idle.
3.CpuFriend kexts in kexts folder, NO SSDT-PLUG.aml in ACPI/Patched folder and plugintype1=false in config.plist
(this option has CPU base freq at 600Mhz, but idle req freq is never bellow 1,2Gmhz. Core watts 0,30 and bellow at times at idle, PKG watts 1.70 at idle, cpu utilization is less than 3 % at idle
You can choose which option you like.
(Importand!!!!! From now on builds will be based on an unlocked CFG so please, if you don't have one modify config.plist settings.) Updated kexts changed config.plist settings for unlocked CFG (see above for method). Included a SSDT-PLUD for cpu Recreated CPUFriend Data Provider kext Installed 10.15.4 supplemental update with no problem
Options
In my EFI you will find an SSDT-PLUG.aml
1. CpuFriend kexts in kexts folder and SSDT-PLUG.aml in ACPI/Patched folder, with plugintype1=false in config.plist
2. CpuFriend kexts in kexts folder, NO SSDT-PLUG.aml in ACPI/Patched folder, with plugintype1=true in config.plist
(these two options give the same results. CPU base freq at 600Mhz, idle freq at 600mhz, core watts 0,30 at idle, PKG watts 1.70 at idle, cpu utilazation at 4,70 % and a bit more at idle.
3.CpuFriend kexts in kexts folder, NO SSDT-PLUG.aml in ACPI/Patched folder and plugintype1=false in config.plist
(this option has CPU base freq at 600Mhz, but idle req freq is never bellow 1,2Gmhz. Core watts 0,30 and bellow at times at idle, PKG watts 1.70 at idle, cpu utilization is less than 3 % at idle
You can choose which option you like.