Contribute
Register

[Guide] Lenovo G50-70 and Z50-70 Bios whitelist removal

Status
Not open for further replies.
You can now press OK on the PhoenixTool popup. It will repack your bios and after a while you will find LENOVO-9ACN26WW_SLIC.rom besides the backup one in the workspace folder.

hi, I get this error in this step.

error.png

you know what can be the problem?

**In bios setup, when i do the 'restore default settings', nothing change, is like not working.. Maybe this is the problem? no default settings in my bios?

thanks

EDIT: remove the BAK auto-backup and it works
 
- Reading Flash [0x800000] 4096KB of 4096KB - 100% complete.
- Erasing Flash Block [0x61F000] - 100% complete.
- Programming Flash [0x61F000] 1516KB of 1516KB - 100% complete.
- Erasing Flash Block [0x6D4000] - 100% complete.
- Programming Flash [0x6D4000] 12KB of 12KB - 100% complete.
- Verifying Flash [0x800000] 4096KB of 4096KB - 100% complete.
RESULT: The data is identical.


FPT Operation Passed



Thanks for you awesome guide! you should add in #1 the .bak autobackup uncheck and the sleep trip :)

thanks again
 
I was able to downgrade to 26, mod, then upgrade to 32, mod, downgrade to 26 and upgrade again to a modded 32 version, I noticed something odd, the bios would show 9acn32ww but the EC would show 9bcn26ww, I remember that before the modding everything would match on BIOS and EC version. I don't see any odd behavior so far.
 
Hello,
I successfuly removed the whitelist with this guide! Thanks a lot!
But now I have the Problem, that my new BMC94356Z M.2 NGFF not work ?!

"About this mac" shows me this (WLAN)

Softwareversionen:
CoreWLAN:11.0 (1101.20)
CoreWLANKit:11.0 (1101.20)
Menüerweiterung:11.0 (1121.34)
Systeminformationen:12.0 (1100.2)
IO80211-Familie:11.1 (1110.26)
Diagnose:5.1 (510.88)
AirPort-Dienstprogramm:6.3.6 (636.5)

Do I need some spezial kext?
 
Last edited:
Hello,
I successfuly removed the whitelist with this guide! Thanks a lot!
But now I have the Problem, that my new BMC94356Z M.2 NGFF not work ?!

"About this mac" shows me this (WLAN)

Softwareversionen:
CoreWLAN:11.0 (1101.20)
CoreWLANKit:11.0 (1101.20)
Menüerweiterung:11.0 (1121.34)
Systeminformationen:12.0 (1100.2)
IO80211-Familie:11.1 (1110.26)
Diagnose:5.1 (510.88)
AirPort-Dienstprogramm:6.3.6 (636.5)

Do I need some spezial kext?

http://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 
I have made it to the last step that involves flashing, but I get an error when I run FPTw64.

Error 201: [FPTw64.exe] cannot be run on the current platform. Please contact the vendor.

I am on Windows 10. Do I need a different version of the program, and if I do, can you provide it? Or do I need to use some other method?
 
I have made it to the last step that involves flashing, but I get an error when I run FPTw64.

Error 201: [FPTw64.exe] cannot be run on the current platform. Please contact the vendor.

I am on Windows 10. Do I need a different version of the program, and if I do, can you provide it? Or do I need to use some other method?

Have you tried other ig-platform-id values?
 
Sorry if I missed this in the thread, but where would I find which ig-platform-id to use and where do I set this setting?

You can extract the valid ig-platform-id values from the kext binary itself. If you search, you will probably find where I posted a list. Not near my main computer right now, so I don't have the file...
 
Status
Not open for further replies.
Back
Top