[Guide] Lenovo G400s (not touch) Sierra 10.12.6 using Clover UEFI

[thiprogramador]

PRE-INSTALLATION:

1. Follow Rehabman guide to boot OS X Installer with Clover: https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
2. In essential kexts, you only needs FakeSMC.kext and VoodooPS2Controller.kext to boot;
3. Replace the Clover default config.plist selecting one in Rehabman's list. In my case, my resolution is HD4000 1366x768: https://github.com/RehabMan/OS-X-Clover-Laptop-Config

BIOS-SETTINGS:

• Follow Rehabman guide in pre-installation.

INSTALLATION:

• Follow Rehabman guide in pre-installation.

TEMPORARY GLITCHES SOLUTION IN INSTALLATION:

• If you have glitches in installation with HD4000, you have to define FakeID in Graphics Injection Clover option menu. The FakeID have to be equals to ig-platform-id.

POS-INSTALLATION:

• Wi-Fi: For Atheros 9485 I have found the driver in the osx86 community;
• Ethernet: Use the driver: https://www.tonymacx86.com/resources/atherose2200ethernet.322/
• Audio: Use the Voodoo HDA: https://sourceforge.net/projects/voodoohda/
• Battery: Use the ACPI Battery Manager: https://bitbucket.org/RehabMan/os-x-acpi-battery-driver/downloads/

DEFINITIVE GLITCHES SOLUTION:

• Remove the FakeID configuration and follow the link: https://www.tonymacx86.com/threads/...glitches-noise-artifacts.181844/#post-1173690

NOT TESTED:

• External Monitor using HDMI;
• HDMI Audio;
• Card Reader (I am not using);
• VGA.

 

[felipefrg]

It does still working even for Mojave OS? I have the same model and I would like to hackin it. Tks

 

[thiprogramador]

Yes. In that moment I have installed the Mojave and the guide will works fine.

 

[felipefrg]

Great! Thank you so much for reply me.

Another questions
This set runs fluently or is there some lags?
Are you already tested "not tested" things that you mentioned previously?

Recently I upgraded my laptop with RAM from 4 gb to 12gb, changed hdd to 240gb ssd!

Tks again

 

[thiprogramador]

Yes, all runs fine.

Updated to Mojave:

[Guide] Lenovo G400s (not touch) Mojave 10.14.3 using Clover UEFI

PRE-INSTALLATION: Follow Rehabman guide to boot OS X Installer with Clover: https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/ In essential kexts, you only needs FakeSMC.kext and VoodooPS2Controller.kext to boot; Replace the Clover default...

www.tonymacx86.com

 

[agumyp]

Hi friend, can you help me install Mac OS on Lenovo G400s. I have tried many times but still failed