[Guide] Intel Skylake NUC6 (and Skull Canyon) using Clover UEFI (NUC6i5SYK, NUC6i7KYK, etc)

[RehabMan]

Same issue via the macos installer

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[samanfield]

I cant even get into the os to give you any files

 

[RehabMan]

I cant even get into the os to give you any files

You should be able to:
1) collect verbose boot photo
2) ZIP EFI/Clover (without themes) from the USB stick and attach

 

[samanfield]

Not sure how to get the verbose screen shot and clover is installed on the internal m2. Mac sierra is installed on the ssd drive 250g

 

[samanfield]

Well I booted sierra macos off the clover usb so the os is fine.

ZIP EFI/Clover attached

 

[RehabMan]

Not sure how to get the verbose screen shot

Use a camera or your phone to take a photo.

and clover is installed on the internal m2. Mac sierra is installed on the ssd drive 250g

OK.

Well I booted sierra macos off the clover usb so the os is fine.

ZIP EFI/Clover attached

This EFI/Clover is from where?
This looks to be a post-install setup, but Clover is very old (you need to update to latest RehabMan build) and Clover/drivers64UEFI and Clover/kexts/Other are not per guide.
Your config.plist is also not up-to-date with respect to the current github project.

 

[samanfield]

Its working again im just gonna leave it on high sierra

 

[RehabMan]

Its working again im just gonna leave it on high sierra

If you want to go to Mojave, you must follow the instructions in post #1 exactly as written.

 

[RehabMan]

FYI: Guide moved to Mojave Desktop Guides

 

[Lanman71]

Going to post here instead of Mojave forum because these are upgrade questions:

Rehabman -

To confirm does your version of Clover now include ApfsDriverLoader-64.efi - thus removing the need to manually copy over apfs.efi?

As discussed before, with the desire to do this in steps, do you recommend upgrading Clover first or the repository files with a reboot in between? Or does it not matter?

Thanks.