Contribute
Register

[Guide] Intel Skylake NUC6 (and Skull Canyon) using Clover UEFI (NUC6i5SYK, NUC6i7KYK, etc)

Status
Not open for further replies.
Alright. The reason I asked is that despite trying the guide here I am unable to get pass the installation. Perhaps you can tell me what to do and I can test out certain things for you.

Keep in mind you need new Clover for Mojave.
 
Alright. The reason I asked is that despite trying the guide here I am unable to get pass the installation. Perhaps you can tell me what to do and I can test out certain things for you.
Ok. I am using Clover 4630. I suppose that is the new one.

I don't see where you attached problem reporting files...
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 
OK attached is the Problem Reporting files.

This is booting High Sierra 10.13.6 (as shown in ioreg).
Thought you were having some troubles with Mojave?
 
Hi Rehabman ,
I installed High Sierra on my NUC6i7KYK ,
I followed your Post Installation guideline , after done everything working fine , audio also fully working ; But 2 apps HWMonitor and TG PRO became can not open or show nothing from the drop down menu ;
Any solution for that ?
BestRegards David
 
Last edited:
Hi Rehabman ,
I installed High Sierra on my NUC6i7KYK ,
I followed your Post Installation guideline , after done everything working fine , audio also fully working ; But 2 apps HWMonitor and TG RPO became can not open or show nothing from the drop down menu ;
Any solution for that ?
BestRegards David

No idea what "TG RPO" is.
And you will need to show images of the HWMonitor problem.
And you will need to attach problem reporting files as per post #1.
 
Sorry for the type error ... Its TG Pro;
https://www.tunabellysoftware.com/tgpro/
Both HWMonitor and TG Pro are system temperature monitoring apps , Before POST Installation all git ... Steps both working fine ; After POST Installation , HWMonitor can not Open , TG_Pro show "NA" from the menu ba and all temperature empty ; Please refer the attachment for detail info ... Thanks
 

Attachments

  • IOReg_EFI&ScreenShot.zip
    6.8 MB · Views: 88
Sorry for the type error ... Its TG Pro;
https://www.tunabellysoftware.com/tgpro/
Both HWMonitor and TG Pro are system temperature monitoring apps , Before POST Installation all git ... Steps both working fine ; After POST Installation , HWMonitor can not Open , TG_Pro show "NA" from the menu ba and all temperature empty ; Please refer the attachment for detail info ... Thanks

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 
Hi Rehabman ,
Here's the missing kextstat_Output file ;
I cant run ./gen_debug.sh , even I use IORegistryExplorer2.1 download from his site ;
Error :
=====================================

+ macOS DEBUG REPORT GENERATOR +

-------------------------------------

+ SCRIPT VERSION 4.2.9 +

=====================================



=====================================

+ AUTHOR: black.dragon74 +

=====================================



Found script data directory at /Users/davidtan/Library/debugNk

EFI Mount Script (RehabMan) found. No need to download.

IORegistryExplorer found at /Applications/IORegistryExplorer.app

Verifying if correct version of IORegistryExplorer is installed.

This version of IORegistryExplorer is not recommended.

Removing conflicting version.

Checking connectivity..

Unable to connect to the internet. Aborted.
 

Attachments

  • kextstat_Output.zip
    2 KB · Views: 85
Status
Not open for further replies.
Back
Top