[Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

[hackappleSG]

After installing VoodooHDA 2.9.0, the audio part is working. Fixing the Bluetooth. Now I can't turn off the built in bluetooth and it is not working. I have external BT dongle. Anyone can help me to fix it? Thanks.

 

[whoseanthony]

Confusion...
Your profile indicates NUC7, yet you mention Macmini8,1 (applicable to NUC8 only).

How can I change from iMac16,2 to Macmini8,1?

Just loaded a new NUC8 following your's and clics guides. (THANK YOU)

2 issues - can't set the system to just boot to macOS and can't change to Macmini8,1. Tried with clover config by mounting efi and saving but nada

 

[whoseanthony]

How can I change from iMac16,2 to Macmini8,1?

Just loaded a new NUC8 following your's and clics guides. (THANK YOU)

2 issues - can't set the system to just boot to macOS and can't change to Macmini8,1. Tried with clover config by mounting efi and saving but nada

Well I got the system to finally boot directly to macOS. But when i changed the NUC8 to Macmini8,1 the system booted fine but showed a 2012 iMac vs 16,2??

 

[Quarsy]

For the NUC8i7BEH, should I format my USB to MBR or GPT?

 

[Applemanfan]

For the NUC8i7BEH, should I format my USB to MBR or GPT?

As @Cric mentioned in his post/article above (see 7 posts ago):

"MBR USB with a FAT32 partition for Clover and a separate HFS+J partition for the OS X installer."

 

[Quarsy]

As @Cric mentioned in his post/article above (see 7 posts ago):

"MBR USB with a FAT32 partition for Clover and a separate HFS+J partition for the OS X installer."

Thanks!

 

[chuckw]

EDIT: Delete.

 

[crumpx]

After the install, I have a synthesised partition in my disk. Is this because my MacOS USB was created in a virtual machine in windows? Can I just erase this partition?

don't touch it, it's apfs container.

 

[crumpx]

https://www.tonymacx86.com/threads/graphics-test-bruce-x.224983/

Thanks for the reply.

I did connect the data +- to usb header 2(-),3(+). however the system will not see the device. I ordered a new set of card and adapter, will test when it arrived.
as of FCP, I have no problem install, open, loading bruce x xml and playback the mov with quicktime player.

I will attach another clover config here later, internet doesn't agree with me atm....

When testing this setup I use HDMI to connect to a monitor, with no speaker. but I also tested it with my tv and sound over HDMI confirmed working.

However, after extend time leaving the box idle, the screen will turn to white noise and will not come back from it. I have to force shutdown with power Botton. any ideas?

Edit: bluetooth is not always working, I don't know why...

 

[schlotterp]

Does anyone know why Hwmonitor runs only on one user account? In my case the first account I created on the Hackintosh (Admin). In my personal account (also with admin rights), it won’t run. On my dedicated admin account (Admin) it runs with no problem.

Thanks in advance.

Greetings
schlotterp