Contribute
Register

[Guide] Intel Framebuffer patching using WhateverGreen

I have no word to thank you for this post, i was running many days, working on Video Station of a friend with an old mobo TH, with 4790K, HD4600 and RX580, and FCPX was hang under mojave, i follow your setup working with the new Whatevergreen, and now all is Working WELL, stable, and fast, get all acceleration from the Duet Hd4600 and RX580. Realy Thank you gars. !!!!!!!!! (i can say also that fcpx work realy well with Amd 580, it was before a setup with nvidia 980, it was slow and bugy, with the Saphire R580, 8go FCPX run fast and stable. good to know for people doing video editing)

Does HEVC + H264 work? By hardware?

Can you help me know how?

I have the same hardware, but I only get H264, HEVC are not supported.
 
For those with intel hd530 graphics here is what I did to get my video card working. Its easy.
Workes for me on Mojave and High Siera.
1. I placed Lilu.kext and Watevergreen.kext into /Library/Extensions using kext wizard/kext beast.
2. I opened my SSD Efi config.plist and changed FakeID/IntelGFX to 0x0 And changed ig-platform-id to 0x193B0005.
It works perfectly now.
THIS WORKED!
 
Clover requires this value to be in Data format so you need to reverse the bytes

Sorry, if I ask, but I don't understand how to convert from hex to data ig-platform ?
 
Can you see tour config.plist?? I cant boot if use Framebuffer




After many attempts, I have framebuffer running with 2048mb.

but I have no higher resolution than 2560 x 1440, which is missing to obtain said resolution.

Connected by HDMI or DisplayPort I do not get more resolution

I kindly ask you to share your plist configuration. I have your own MB and graphics and I can not get over it. It only shows 5 MB. thank you
 
@RehabMan
is the Framebuffer patching CPU/GPU dependent or the mother board also influences?
As far as I understand intel GPU acceleration should be independent of the motherboard, am I correct in this assumption ?
 
@RehabMan
is the Framebuffer patching CPU/GPU dependent or the mother board also influences?
As far as I understand intel GPU acceleration should be independent of the motherboard, am I correct in this assumption ?

Different motherboards will have connectors configured differently.
 
And how can I get Framebuffer Patching info if I cannot install Mojave on the very hardware with Intel 530 (I5-6400)?
 
And how can I get Framebuffer Patching info if I cannot install Mojave on the very hardware with Intel 530 (I5-6400)?

Your profile indicates Nvidia, not Intel graphics.
Is it inaccurate?
 
Back
Top